Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 993297 DEA: 010F8204 EFIS: 0116000067
QA Service Level: 1
DIST-CO-RTE-PM: 01-HUM-101-R90.1/109.6
Work Description: PLACE RHMA-G AND HMA (TYPE A).
Location Description: IN HUMBOLDT COUNTY IN AND NEAR TRINIDAD FROM 1.3 MILES SOUTH OF SCHOOL ROAD OVERCROSSING TO 0.4 MILE NORTH OF BIG LAGOON BRIDGE
Contractor Name: MERCER-FRASER COMPANY
Contractor Address: 77 West Second Street, Eureka, CA 95501
Resident Engineer: Ryan Dunne Structure Rep.: Michele Stover
DIME Sample ID: 2022-10-21-23
TL Number from the TL Form: 026734
Sample Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Sample Organization Contact: (916) 227-7302
Type of Sample: Department Acceptance
Type of Material: Asphalt Binder
Sample Taken Date: 10/21/2022
Date that the sample was received by the laboratory/organization performing the testing: 10/25/2022
The quantity of what the sample constitutes: 1 Can
A brief description of the sample: binder 64-16
From where was the sample collected: Source
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Mercer Fraser Fortuna Plant B / Valero Benicia
Performance Grade: PG 64-16
Modified: No
Lot number:
Sublot number:
Tank number:
Time of sample:
HMA Supplier:
Certified Asphalt Supplier: Valero Marketing & Supply - Benicia CA
Multigrade: Yes
Multigrade Type: PG 64-16 / PG 64-10
Asphalt Binder Mix Number:
DIME Test ID: 2022-10-21-23-1
Test Method: AASHTO T315-22: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Verified Date: 10/26/2022
Date Tested: 10/26/2022
Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Organization Address: 5900 Folsom Boulevard, Room 225,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (916) 227-7302
General Comments for this Test: OG
Test Result Compliance: complies
Additional Comments When Verified:
Phase
|
Original binder
|
Test Gap
|
1 mm
|
Test Frequency
|
10.0 rad/s
|
Strain Amplitude
|
12.00 %
|
Stress Amplitude
|
0.166 kPa
|
Phase Angle (δ) (for the 10 cycles)
|
86.1 degree
|
Complex Modulus (G*) (for the 10 measurements)
|
1.382 kPa
|
Test Temperature (Specimen 1)
|
64.0 C
|
Dynamic Shear, G*/sin(δ)
|
1.39 kPa
|