Sample Record for 2022-09-16-48
Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project Information
Project ID: 993418 DEA: 07324404 EFIS: 0716000077
QA Service Level: 1
DIST-CO-RTE-PM: 07-LA-22-0.0/1.5
Work Description: PLACE RHMA-G AND MODIFY SIGNAL AND LIGHTING SYSTEM.
Location Description: LOS ANGELES COUNTY IN LONG BEACH FROM ROUTE 1 TO SAN GABRIEL RIVER UNDERCROSSING
Contractor Name: Sulley Miller Contracting Co.
Contractor Address: 135 S. State College Blvd. Suite 400, Brea, CA 92821
Resident Engineer: Thang Ton Structure Rep.: Unknown
Sample Information
DIME Sample ID: 2022-09-16-48
TL Number from the TL Form: C-924277
Sample Submitted By Organization: CT D07 - Plant Services
Sample Organization Contact: 562-345-3126
Type of Sample: Department Acceptance
Type of Material: Aggregate
Sample Taken Date: 09/16/2022
Date that the sample was received by the laboratory/organization performing the testing: 09/20/2022
The quantity of what the sample constitutes: 750 Tons
A brief description of the sample: 3/4 HMA AGGREGATE
From where was the sample collected: Manufacturer
Laboratory sample identification: 7756
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: SULLY MILLER IRWINDALE
Material Information
Source Identification (SMARA, name of Pit or Job Site): 91-19-0052
The fabricator's/manufacturer's product name for the sample: 3/4 HMA A
The fabricator/manufacturer designation for the sample:
The plant number:
A detailed description of where the material sample was collected: HMA Plant Cold Feed Conveyor
Where the material sample would have been placed if not sampled: HMA MAT
Primary Aggregate Nominal Size: 3/4 inch
The concrete mix design number: 300072 LTR
Lot number: 1
Sublot number:
Aggregate Mix Number:
Test Results
Test 1 of 2
DIME Test ID: 2022-09-16-48-1
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Verified Date: 10/17/2022
Date Tested: 09/26/2022
Submitted By Organization: CT D07 - Plant Services
Organization Address: 13230 East Firestone Boulevard, Suite G,
Organization City: Santa Fe Springs
Organization State: CA
Organization Zipcode: 90670
Organization Email: victor.zengler@dot.ca.gov
Organization Phone: (562) 345-3126
General Comments for this Test:
Test Result Compliance: not applicable
Additional Comments When Verified:
|
What type of gradation is being tested?
|
HMA Gradation
|
|
Cumulative percent passing the 1 1/2 in. sieve
|
100 %
|
|
Cumulative percent passing the 1 in. sieve
|
100 %
|
|
Cumulative percent passing the 3/4 in. sieve
|
100 %
|
|
Cumulative percent passing the 1/2 in. sieve
|
84 %
|
|
Cumulative percent passing the 3/8 in. sieve
|
69 %
|
|
Cumulative percent passing the #4 sieve
|
39 %
|
|
Cumulative percent passing the #8 sieve
|
20 %
|
|
Cumulative percent passing the #16 sieve
|
15 %
|
|
Cumulative percent passing the #30 sieve
|
11 %
|
|
Cumulative percent passing the #50 sieve
|
5 %
|
|
Cumulative percent passing the #100 sieve
|
3 %
|
|
Cumulative percent passing the #200 sieve
|
1.6 %
|
Test 2 of 2
DIME Test ID: 2022-09-16-48-2
Test Method: AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)
Verified Date: 10/17/2022
Date Tested: 09/26/2022
Submitted By Organization: CT D07 - Plant Services
Organization Address: 13230 East Firestone Boulevard, Suite G,
Organization City: Santa Fe Springs
Organization State: CA
Organization Zipcode: 90670
Organization Email: victor.zengler@dot.ca.gov
Organization Phone: (562) 345-3126
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
