Print Report | Back to Sample Detail

Sample Record for 2022-09-29-32

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 993495 DEA: 120S2104 EFIS: 1219000106 QA Service Level: 1
DIST-CO-RTE-PM: 12-ORA-5-R24.0/37.7
Work Description: APPLY METHACRYLATE TREATMENT AND REPLACE JOINT SEALS AND BEARING PADS.
Location Description: ORANGE COUNTY AT VARIOUS LOCATIONS FROM S5-N133 CONNECTOR SEPARATION IN IRVINE TO BALL ROAD OVERCROSSING IN ANAHEIM
Contractor Name: J. FRANCIS COMPANY
Contractor Address: 766 Palmyrita Ave, Suite C, Riverside, CA 92507
Resident Engineer: Mike Ezzedine Structure Rep.: Noah Bruton

Sample Information

DIME Sample ID: 2022-09-29-32
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Sample Organization Contact: (530) 329-6527
Type of Sample: Quality Assurance
Type of Material: SMTL TM1 - Elastomeric Bearing Pad
Sample Taken Date: 09/29/2022
Date that the sample was received by the laboratory/organization performing the testing: 10/03/2022
The quantity of what the sample constitutes: 1
A brief description of the sample: bearing pad
From where was the sample collected: Manufacturer
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Scougal Rubber

Material Information

Mfg. Lot Number(s): 21693-1
Material/Compound/Elastomer ID: na
Samples Representing: 1
Description (size): 3.45"x16"x24"
Comments:
Description (Number of Shims): 6
Type of Bearing Pad: Steel
Description (Thickness of Shims): 14 gage
Manufacturer(s): Scougal Rubber
Batch Number: na
Test results on following page(s): 4

Test Results

Test 1 of 4

DIME Test ID: 2022-09-29-32-1
Test Method: ASTM D2240-15r21: Standard Test Method for Rubber Property - Durometer Hardness
Verified Date: 10/17/2022
Date Tested: 10/13/2022
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Temperature 72 f
Humidity 50 %
Reading #1 55
Reading #2 55
Reading #3 54
Reading #4 54
Reading #5 55
Mean 54.6

Test 2 of 4

DIME Test ID: 2022-09-29-32-2
Test Method: ASTM D412-16r21: Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers-Tension
Verified Date: 10/17/2022
Date Tested: 10/13/2022
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Number of specimens tested 3
Unit of the Ultimate Tensile Values lbf per sqr in
UTM 2kip
Humidity 50.00 %
Temperature 72 F
Sample 1 Median Thickness 0.083
Sample 1 Thickness all Within 0.003 inch? Yes
Sample 1 Ultimate Tensile 2918.39 lbf/in^2
Sample 1 Elongation (350% Min) Pass
Sample 2 Median Thickness 0.083
Sample 2 Thickness all Within 0.003 inch? Yes
Sample 2 Ultimate Tensile 2909.35 lbf/in^2
Sample 2 Elongation (350% Min) Pass
Sample 3 Median Thickness 0.086
Sample 3 Thickness all Within 0.003 inch? Yes
Sample 3 Ultimate Tensile 2761.9 lbf/in^2
Sample 3 Elongation (350% Min) Pass
Median of the Ultimate Tensile Values 2909.4 lbf/in^2

Test 3 of 4

DIME Test ID: 2022-09-29-32-3
Test Method: ASTM D624-00r20: Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers
Verified Date: 10/17/2022
Date Tested: 10/13/2022
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Number of specimens tested 3
UTM 2kip
Humidity 50.00 %
Temperature 72 F
Sample 1 Median Thickness 0.077
Sample 1 Tear Strength 294.2
Sample 2 Median Thickness 0.093
Sample 2 Tear Strength 297.5
Sample 3 Median Thickness 0.095
Sample 3 Tear Strength 288.4
Median of the Tear Strength Values 294.2 lb/in

Test 4 of 4

DIME Test ID: 2022-09-29-32-4
Test Method: SMTL BILST-06: (Neoprene Verification) Bilstein Test
Verified Date: 10/14/2022
Date Tested: 10/14/2022
Submitted By Organization: CT HQ - Sacramento Chemistry Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: sanchita.dey@dot.ca.gov
Organization Phone: (916) 227-7912
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Result Pass