Print Report | Back to Sample Detail

Sample Record for 2022-09-30-41

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 215591 DEA: 112N0724 EFIS: 1119000164 QA Service Level: 1
DIST-CO-RTE-PM: 11-IMP-111-R0.1/R1.2
Work Description: COLD PLANE, PLACE STRESS ABSORBING MEMBRANE INTERLAYER AND RHMA.
Location Description: IMPERIAL COUNTY IN CALEXICO FROM 0.1 MILE NORTH OF MEXICO BORDER TO ROUTE 98.
Contractor Name: PAL General Engineering
Contractor Address: 2365 Paseo DeLasAmericas#104-1461, San Diego, CA 92154
Resident Engineer: Benjamin Haney Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2022-09-30-41
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Sample Organization Contact: (916) 594-1991
Type of Sample: Quality Assurance
Type of Material: Rapid Set
Sample Taken Date: 09/30/2022
Date that the sample was received by the laboratory/organization performing the testing: 08/11/2022
The quantity of what the sample constitutes: 1 bag
A brief description of the sample: CTS Concrete Mix
From where was the sample collected: Manufacturer
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Unknown

Material Information

Manufacturer: CTS
Mix no.: 3659
Materials Received: 8-11-22
Lot no.: 23106072
Batch no.: 23106072
Test results on following page(s): 1

Test Results

Test 1 of 1

DIME Test ID: 2022-09-30-41-1
Test Method: CONCLP 2-16: Rapid Set Patching Materials
Verified Date: 10/10/2022
Date Tested: 09/30/2022
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: spencer.adams@dot.ca.gov
Organization Phone: (916) 227-5716
General Comments for this Test:
Test Result Compliance: does not comply
Additional Comments When Verified:
Compressive Strength @ 3 hrs (CTM 551) 3560 psi
Compressive Strength @ 24 hrs (CTM 551) 4140 psi
Flexure Strength @ 24 hrs (CTM 551) 0 psi
Bond Strength @ 24 hrs - SSD (CTM 551) 0 psi
Bond Strength @ 24 hrs - Dry (CTM 551) 0 psi
Water Absorption (CTM 551) 0 %
Abrasion @ 24 hrs (CTM 550) 23 g
Drying Shrinkage @ 4 days (CTM 596) 0 %
Soluble Chlorides (CTM 422) 0.0053 %
Water Soluble-Sulfates (CTM 417) 0.29 %
Material Weight 55 lb
Water Weight 8.33 lb