Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 993555 DEA: 061C4304 EFIS: 0621000166
QA Service Level: 1
DIST-CO-RTE-PM: 06-MAD-41,99-9.2/11.7,0.0/1.5
Work Description: COLD PLANE AC, PLACE RHMA-G AND HMA (TYPE A).
Location Description: MADERA COUNTY NEAR MADERA ON ROUTE 41 FROM 0.7 MILE SOUTH OF ROAD 209 TO 0.3 MILE NORTH OF ROAD 208 AND ON ROUTE 99 FROM MADERA COUNTY LINE TO 0.7 MILE SOUTH OF AVENUE 8 OVERCROSSING
Contractor Name: CAL VALLEY CONSTRUCTION INC.
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown
DIME Sample ID: 2022-09-13-36
TL Number from the TL Form: 027869
Sample Submitted By Organization: CT HQ - Sacramento Hot Mix Asphalt Laboratory
Sample Organization Contact: (916) 227-7302
Type of Sample: Acceptance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 09/13/2022
Date that the sample was received by the laboratory/organization performing the testing: 09/15/2022
The quantity of what the sample constitutes: 3 Boxes
A brief description of the sample: 1/2 RHMA-G
From where was the sample collected: Source
Laboratory sample identification: 022-049
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Vulcan Madera Plant
DIME Test ID: 2022-09-13-36-1
Test Method: AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 09/26/2022
Date Tested: 09/23/2022
Submitted By Organization: CT HQ - Sacramento Hot Mix Asphalt Laboratory
Organization Address: 5900 Folsom Boulevard, Room 225,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (916) 227-7302
General Comments for this Test:
Test Result Compliance: not applicable
Additional Comments When Verified:
|
Number of tests
|
1
|
|
What is the unit of measurement for theoretical density?
|
US Units
|
|
Mass Determination
|
Water
|
|
Method Performed
|
Manual Agitation - Method B
|
|
Mass of oven-dry sample in air for Sample 1
|
1575.2 grams
|
|
Mass of sample in water for Sample 1
|
906.4 grams
|
|
Temperature of Water
|
77 °F
|
|
Specific Gravity for Sample 1
|
2.355
|
|
Theoretical maximum density at 25°C (77°F)
|
146.6 lb/ft^3
|
DIME Test ID: 2022-09-13-36-2
Test Method: AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)
Verified Date: 09/26/2022
Date Tested: 09/20/2022
Submitted By Organization: CT HQ - Sacramento Hot Mix Asphalt Laboratory
Organization Address: 5900 Folsom Boulevard, Room 225,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (916) 227-7302
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
|
Percent Air Voids
|
3.1 %
|
|
Percent Air Voids 2
|
2.8 %
|
|
Percent Air Voids 3
|
2.4 %
|
|
Percent Air Voids Average
|
2.8 %
|
DIME Test ID: 2022-09-13-36-3
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Verified Date: 09/26/2022
Date Tested: 09/20/2022
Submitted By Organization: CT HQ - Sacramento Hot Mix Asphalt Laboratory
Organization Address: 5900 Folsom Boulevard, Room 225,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (916) 227-7302
General Comments for this Test:
Test Result Compliance: not applicable
Additional Comments When Verified:
|
Bulk Specific Gravity
|
2.283
|
|
Bulk Specific Gravity 2
|
2.288
|
|
Bulk Specific Gravity 3
|
2.298
|
|
Average Bulk Specific Gravity
|
2.29
|
