Sample Record for 2022-09-09-51
Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project Information
Project ID: 993505 DEA: 022J4404 EFIS: 0221000078
QA Service Level: 1
DIST-CO-RTE-PM: 02-LAS-139-38.0/43.0
Work Description: REPLACE AC SURFACING, ASPHALT RUBBER BINDER, SEAL COAT & HMA OVERLAY.
Location Description: LASSEN COUNTY ABOUT 37 MILES NORTH OF SUSANVILLE FROM 4.3 MILES NORTH OF SOUTH GRASSHOPPER ROAD TO 0. 2 MILE SOUTH OF TERMO GRASSHOPPER ROAD
Contractor Name: Hat Creek Construction
Contractor Address: 24339 Highway 89 N, Burney, CA 96013
Resident Engineer: Daniel Gibbs Structure Rep.: Unknown
Sample Information
DIME Sample ID: 2022-09-09-51
TL Number from the TL Form: 841606
Sample Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Sample Organization Contact: (530) 225-3194
Type of Sample: Acceptance
Type of Material: Aggregate
Sample Taken Date: 09/09/2022
Date that the sample was received by the laboratory/organization performing the testing: 09/09/2022
The quantity of what the sample constitutes: Production Start-Up Evaluation
A brief description of the sample: 3 bags of Combined Lime Treated 1/2-inch Virgin Aggregate
From where was the sample collected: Manufacturer
Laboratory sample identification: D79156A
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Hat Creek Construction and Materials – Shaw Pit Facility (Lookout, CA)
Material Information
Source Identification (SMARA, name of Pit or Job Site): 91-25-0008::Shaw Pit
The fabricator's/manufacturer's product name for the sample:
The fabricator/manufacturer designation for the sample:
The plant number:
A detailed description of where the material sample was collected: Cold Feed Conveyer Stream
Where the material sample would have been placed if not sampled:
Primary Aggregate Nominal Size: 1/2 inch
The concrete mix design number:
Lot number:
Sublot number:
Aggregate Mix Number:
Test Results
Test 1 of 1
DIME Test ID: 2022-09-09-51-1
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Verified Date: 09/27/2022
Date Tested: 09/13/2022
Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Organization Address: 1657 Riverside Drive,
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: 530-225-3194
General Comments for this Test:
Test Result Compliance: not applicable
Additional Comments When Verified:
|
What type of gradation is being tested?
|
HMA Gradation
|
|
Cumulative percent passing the 1 1/2 in. sieve
|
100 %
|
|
Cumulative percent passing the 1 in. sieve
|
100 %
|
|
Cumulative percent passing the 3/4 in. sieve
|
100 %
|
|
Cumulative percent passing the 1/2 in. sieve
|
94.2 %
|
|
Cumulative percent passing the 3/8 in. sieve
|
76.9 %
|
|
Cumulative percent passing the 1/4 in. sieve
|
57 %
|
|
Cumulative percent passing the #4 sieve
|
46.5 %
|
|
Cumulative percent passing the #8 sieve
|
27.9 %
|
|
Cumulative percent passing the #16 sieve
|
17.7 %
|
|
Cumulative percent passing the #30 sieve
|
11.9 %
|
|
Cumulative percent passing the #50 sieve
|
8.2 %
|
|
Cumulative percent passing the #100 sieve
|
6 %
|
|
Cumulative percent passing the #200 sieve
|
4.72 %
|
