Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 44444 DEA: ASCP EFIS: ASCP
QA Service Level:
DIST-CO-RTE-PM: 59---
Work Description: Special project for submitting Sample information for Asphalt Supplier Certification Program.
Location Description:
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown
DIME Sample ID: 2022-08-15-61
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Sample Organization Contact: (916) 227-7302
Type of Sample: Verification
Type of Material: Asphalt Binder
Sample Taken Date: 08/15/2022
Date that the sample was received by the laboratory/organization performing the testing: 09/19/2022
The quantity of what the sample constitutes: 1 of 2 split
A brief description of the sample: Tank 5901
From where was the sample collected: Manufacturer
Laboratory sample identification: 1659353252
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Bakersfield, CA
Performance Grade: PG 70-10
Modified: No
Lot number:
Sublot number:
Tank number: 5901
Time of sample:
HMA Supplier:
Certified Asphalt Supplier: The Centennial Asphalt Co. - Bakersfield
Multigrade: No
Multigrade Type:
Asphalt Binder Mix Number:
DIME Test ID: 2022-08-15-61-1
Test Method: AASHTO T315-22: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Verified Date: 09/22/2022
Date Tested: 09/21/2022
Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Organization Address: 5900 Folsom Boulevard, Room 225,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (916) 227-7302
General Comments for this Test: OG
Test Result Compliance: complies
Additional Comments When Verified:
Phase
|
Original binder
|
Test Gap
|
1 mm
|
Test Frequency
|
10.0 rad/s
|
Strain Amplitude
|
12.00 %
|
Stress Amplitude
|
0.216 kPa
|
Phase Angle (δ) (for the 10 cycles)
|
88.1 degree
|
Complex Modulus (G*) (for the 10 measurements)
|
1.798 kPa
|
Test Temperature (Specimen 1)
|
70.0 C
|
Dynamic Shear, G*/sin(δ)
|
1.80 kPa
|