Print Report | Back to Sample Detail

Sample Record for 2022-08-23-68

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 993573 DEA: 061C5204 EFIS: 0621000173 QA Service Level: 1
DIST-CO-RTE-PM: 06-KIN-198-7.4/R9.4,R14.8/T21.6
Work Description: COLD PLANE AC PAVEMENT AND PLACE RHMA (GAP GRADED) AND HMA (TYPE A).
Location Description: KINGS COUNTY IN AND NEAR LEMOORE FROM 1.5 MILES WEST OF ROUTE 41/198 SEPARATION TO 0.1 MILE WEST OF NINETEENTH AVENUE OVERCROSSING AND FROM 0.1 MILE EAST OF FOURTEENTH AVENUE UNDERCROSSING TO 0.6 MILE EAST OF ROUTE 43/198 SEPARATION
Contractor Name: GRANITE CONSTRUCTION COMPANY
Contractor Address: 2716 Granite Court, Fresno, CA 93706
Resident Engineer: Din Dadawalla Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2022-08-23-68
TL Number from the TL Form: 039789
Sample Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Sample Organization Contact: (916) 227-7302
Type of Sample: Acceptance
Type of Material: Asphalt Binder
Sample Taken Date: 08/23/2022
Date that the sample was received by the laboratory/organization performing the testing: 08/26/2022
The quantity of what the sample constitutes: 1 CAN
A brief description of the sample: 64-16
From where was the sample collected: Source
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Granite Coalinga

Material Information

Performance Grade: PG 64-16
Modified: No
Lot number: 1
Sublot number: 12
Tank number:
Time of sample:
HMA Supplier:
Certified Asphalt Supplier: San Joaquin Refinery - Bakersfield CA
Multigrade: Yes
Multigrade Type: PG 64-16 / PG 64-10
Asphalt Binder Mix Number:

Test Results

Test 1 of 1

DIME Test ID: 2022-08-23-68-1
Test Method: AASHTO T315-22: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Verified Date: 09/09/2022
Date Tested: 09/02/2022
Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Organization Address: 5900 Folsom Boulevard, Room 225,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (916) 227-7302
General Comments for this Test: OG
Test Result Compliance: complies
Additional Comments When Verified:
Phase Original binder
Test Gap 1 mm
Test Frequency 10.0 rad/s
Strain Amplitude 12.00 %
Stress Amplitude 0.160 kPa
Phase Angle (δ) (for the 10 cycles) 89.3 degree
Complex Modulus (G*) (for the 10 measurements) 1.334 kPa
Test Temperature (Specimen 1) 64.0 C
Dynamic Shear, G*/sin(δ) 1.33 kPa

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
2022-08-23-68-2AASHTO T315-22: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)08/29/2022Not scheduledChan LeeCT HQ - Sacramento Asphalt Binder LaboratoryRTFO
2022-08-23-68-3AASHTO T315-22: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)08/29/2022Not scheduledChan LeeCT HQ - Sacramento Asphalt Binder LaboratoryPAV
2022-08-23-68-4AASHTO T313-22: Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)08/29/2022Not scheduledChan LeeCT HQ - Sacramento Asphalt Binder LaboratoryBBR