Print Report | Back to Sample Detail

Sample Record for 2022-07-20-58

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 993112 DEA: 021H4704 EFIS: 0216000044 QA Service Level: 1
DIST-CO-RTE-PM: 02-TEH-5-36.3/41.6
Work Description: ROADWAY EXCAVATION, HMA (TYPE A), CULVERT WORK AND RSP.
Location Description: TEHAMA COUNTY NEAR RED BLUFF FROM NINE MILE HILL OVERCROSSING TO 0.1 MILE NORTH OF BOWMAN ROAD OVERCROSSING
Contractor Name: BALDWIN CONTRACTING COMPANY INC. DBA. KNIFE RIVER CONSTRUC TION
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2022-07-20-58
TL Number from the TL Form: 037267
Sample Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Sample Organization Contact: (530) 225-3194
Type of Sample: Acceptance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 07/20/2022
Date that the sample was received by the laboratory/organization performing the testing: 07/21/2022
The quantity of what the sample constitutes: Production Start-Up Evaluation
A brief description of the sample: Lime Treated 1/2-inch HMA-O (PG 64-28 M) with binder from Valero – Benicia
From where was the sample collected: Manufacturer
Laboratory sample identification: D79105
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Tullis – Northstate Asphalt (Redding, CA)

Material Information

HMA Type: OGFC
HMA Grading: 1/2 inch
Lot number:
Sublot number:
HMA Mix Number:

Test Results

Test 1 of 1

DIME Test ID: 2022-07-20-58-1
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 08/09/2022
Date Tested: 08/03/2022
Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Organization Address: 1657 Riverside Drive,
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: 530-225-3194
General Comments for this Test: Sample was delivered in unlined cardboard boxes, oil content may have been higher as some oil could have been stuck to the boxes.
Test Result Compliance: complies
Additional Comments When Verified:
What temperature unit is used? Fahrenheit
Test procedure used? no data
Mass of HMA Sample prior to ignition no data
Corrected Asphalt Binder Content 5.08 %
Mass Loss no data
Correction Factor (Percent by mass of HMA Specimen) 0.41 %
Moisture Content no data
Temperature Compensation Factor no data
Test Temperature no data