Print Report | Back to Sample Detail

Sample Record for 2022-08-01-27

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 208942 DEA: 100Y2104 EFIS: 1013000104 COOP: 10415 QA Service Level: 1
DIST-CO-RTE-PM: 10-TUO-108-R4.3/R5.1
Work Description: MODIFY AND WIDEN STRUCTURE
Location Description: AT PEACEFUL OAK ROAD INTERCHANGE ,PART OF EAST SONORA BYPASS
Contractor Name: SIERRA MOUNTAIN CONSTRUCTION INC.
Contractor Address: 13919 Mono Way, Sonora, CA 95370
Resident Engineer: Corey Casey Structure Rep.: Ehab Wahed

Sample Information

DIME Sample ID: 2022-08-01-27
TL Number from the TL Form: 034444
Sample Submitted By Organization: CT D10 - District 10 Materials Laboratory
Sample Organization Contact: (209) 948-7567
Type of Sample: Quality Assurance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 08/01/2022
Date that the sample was received by the laboratory/organization performing the testing: 08/02/2022
The quantity of what the sample constitutes: 2 boxs
A brief description of the sample: 3/4 HMA
From where was the sample collected: Manufacturer
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: George Reed - Table Mountain Plant

Material Information

HMA Type: Type A HMA
HMA Grading: 3/4 inch
Lot number: 1
Sublot number: 3
HMA Mix Number:
Test results on following page(s): 1

Test Results

Test 1 of 1

DIME Test ID: 2022-08-01-27-1
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 04/19/2023
Date Tested: 08/04/2022
Submitted By Organization: CT D10 - District 10 Materials Laboratory
Organization Address: 1976 East Dr. Martin Luther King Jr. Boulevard,
Organization City: Stockton
Organization State: CA
Organization Zipcode: 95205
Organization Email: mandeep.dhesi@dot.ca.gov
Organization Phone: (209) 948-7567
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
What temperature unit is used? Fahrenheit
Test procedure used? no data
Mass of HMA Sample prior to ignition no data
Corrected Asphalt Binder Content 5.20 %
Mass Loss no data
Correction Factor (Percent by mass of HMA Specimen) 0.52 %
Moisture Content no data
Temperature Compensation Factor no data
Test Temperature no data