Print Report | Back to Sample Detail

Sample Record for 2022-07-17-8

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 993612 DEA: 112N1184 EFIS: 1121000147 QA Service Level: 1
DIST-CO-RTE-PM: 11-SD-78-60.3/66.4
Work Description: COLD PLANE, RHMA-G OVERLAY, SHOULDER BACKING AND STRIPING.
Location Description: SAN DIEGO COUNTY NEAR JULIAN FROM WYNOLA ROAD TO 3.5 MILES WEST OF SAN FELIPE CREEK
Contractor Name: HANSON AGGREGATES PACIFIC SOUTHWEST LLC. DBA ATP GENERAL ENGINEERING CONTRAC
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2022-07-17-8
TL Number from the TL Form:
Sample Submitted By Organization: CT D11 - District 11 Materials Laboratory
Sample Organization Contact: (858) 688-1570
Type of Sample: Quality Assurance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 07/17/2022
Date that the sample was received by the laboratory/organization performing the testing: 07/18/2022
The quantity of what the sample constitutes: 12 boxes, 6 bags, 3 cans
A brief description of the sample: 1.5" HMA-A
From where was the sample collected: Supplier
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Vulcan CC

Material Information

HMA Type: Type A HMA
HMA Grading: 1 inch
Lot number:
Sublot number:
HMA Mix Number:
Test results on following page(s): 1

Test Results

Test 1 of 1

DIME Test ID: 2022-07-17-8-2
Test Method: AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 11/02/2022
Date Tested: 07/21/2022
Submitted By Organization: CT D11 - District 11 Materials Laboratory
Organization Address: 7177 Opportunity Road,
Organization City: San Diego
Organization State: CA
Organization Zipcode: 92111
Organization Email: dave.m.cortez@dot.ca.gov
Organization Phone: (858) 688-1570
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Number of tests 1
What is the unit of measurement for theoretical density? US Units
Mass Determination Air
Method Performed no data
Mass of container filled with water 10193.5 grams
Mass of oven-dry sample in air for Sample 1 4014.7 grams
Mass of container filled with the sample and water for Sample 1 12627.6 grams
Temperature of Water 77 °F
Specific Gravity for Sample 1 2.540
Theoretical maximum density at 25°C (77°F) 158.1 lb/ft^3

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
2022-07-17-8-1AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)07/20/202207/21/2022Melchor OronozCT D11 - District 11 Materials LaboratoryMohammad Abbassi
2022-07-17-8-3AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)07/20/202207/21/2022Melchor OronozCT D11 - District 11 Materials LaboratoryMohammad Abbassi
2022-07-17-8-4AASHTO T283-14: Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage (Moisture Content)07/20/202207/27/2022Melchor OronozCT D11 - District 11 Materials LaboratoryMohammad Abbassi
2022-07-17-8-5CTM 389-19: Method of Test for Hamburg Wheel-Track Testing of Compacted Hot Mix Asphalt07/20/202207/19/2022Melchor OronozCT D11 - District 11 Materials LaboratoryMohammad Abbassi