Print Report | Back to Sample Detail

Sample Record for 2022-04-13-85

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 993345 DEA: 022J4004 EFIS: 0221000074 QA Service Level: 1
DIST-CO-RTE-PM: 02-LAS-395-56.5/R61.1
Work Description: COLD PLANE ASPHALT CONCRETE PAVEMENT AND PLACE HMA.
Location Description: LASSEN COUNTY NEAR JANESVILLE FROM 0.1 MILE NORTH OF SUNNYSIDE ROAD TO 0.1 MILE NORTH OF ROUTE 36
Contractor Name: Hat Creek Construction
Contractor Address: 24339 Highway 89 N, Burney, CA 96013
Resident Engineer: Daniel Gibbs Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2022-04-13-85
TL Number from the TL Form: 896946
Sample Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Sample Organization Contact: (530) 225-3194
Type of Sample: Verification
Type of Material: Aggregate
Sample Taken Date: 04/13/2022
Date that the sample was received by the laboratory/organization performing the testing: 04/14/2022
The quantity of what the sample constitutes: JMF Verification
A brief description of the sample: 1/2-inch Untreated Sized Virgin Aggregate
From where was the sample collected: Manufacturer
Laboratory sample identification: D79020A
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Hat Creek Construction and Materials - Ward Lake Plant (Litchfield, CA)

Material Information

Source Identification (SMARA, name of Pit or Job Site): 91-18-0008::Ward Lake Pit
The fabricator's/manufacturer's product name for the sample:
The fabricator/manufacturer designation for the sample:
The plant number:
A detailed description of where the material sample was collected: Sized Untreated Virgin Stockpile
Where the material sample would have been placed if not sampled:
Primary Aggregate Nominal Size: 3/4 inch
The concrete mix design number: JMF 22-04-S01
Lot number:
Sublot number:
Aggregate Mix Number:

Test Results

Test 1 of 1

DIME Test ID: 2022-04-13-85-1
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Verified Date: 07/12/2022
Date Tested: 04/18/2022
Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Organization Address: 1657 Riverside Drive,
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: 530-225-3194
General Comments for this Test: Sample was fine on the 1/2 and 3/8-inch sieves.
Test Result Compliance:
Additional Comments When Verified:
What type of gradation is being tested? HMA Gradation
Cumulative percent passing the 1 1/2 in. sieve 100 %
Cumulative percent passing the 1 in. sieve 100 %
Cumulative percent passing the 3/4 in. sieve 100 %
Cumulative percent passing the 1/2 in. sieve 88.4 %
Cumulative percent passing the 3/8 in. sieve 28.2 %
Cumulative percent passing the 1/4 in. sieve 2.7 %
Cumulative percent passing the #4 sieve 2.3 %
Cumulative percent passing the #8 sieve 2 %
Cumulative percent passing the #16 sieve 1.8 %
Cumulative percent passing the #30 sieve 1.7 %
Cumulative percent passing the #50 sieve 1.5 %
Cumulative percent passing the #100 sieve 1.4 %
Cumulative percent passing the #200 sieve 1.13 %