Print Report | Back to Sample Detail

Sample Record for 2022-07-07-26

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 215584 DEA: 074W7804 EFIS: 0719000277 QA Service Level: 1
DIST-CO-RTE-PM: 07-LA-110-6.8/19.5
Work Description: REPLACE JOINT SEALS, APPLY METHACRYLATE ON DECKS AND SPALL REPAIR.
Location Description: LOS ANGELES COUNTY AT VARIOUS LOCATIONS FROM 220TH STREET ON-RAMP TO 0.1 MILE SOUTH OF MARTIN LUTHER KING JR BOULEVARD
Contractor Name: Autoban Construction, Inc
Contractor Address: 933 N Batavia St, Orange, CA 92867
Resident Engineer: Edgar Herrera Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2022-07-07-26
TL Number from the TL Form: Sacramento Caltrans lab
Sample Submitted By Organization: Kwik Bond Polymers
Sample Organization Contact: (760) 518-6064
Type of Sample: Quality Control
Type of Material: Methacrylate
Sample Taken Date: 07/07/2022
Date that the sample was received by the laboratory/organization performing the testing: 07/12/2022
The quantity of what the sample constitutes: 25000 gallons
A brief description of the sample: 2 pints 204,chp,,8020
From where was the sample collected: Manufacturer
Laboratory sample identification: 943117
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Kwik Bond Polymers, Benicia

Material Information

Mfg. Lot Number(s): 22-70-291390
Batch number: 2270291390
Mix number: 2270291390
Test results on following page(s): 1

Test Results

Test 1 of 1

DIME Test ID: 2022-07-07-26-1
Test Method: CONCLP 4-16: HMWM
Verified Date: 08/26/2022
Date Tested: 08/23/2022
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: spencer.adams@dot.ca.gov
Organization Phone: (916) 227-5716
General Comments for this Test: PCC - SSD bond strength (CA Test 551) and Tack free time accepted based on supplier's results.
Test Result Compliance: complies
Additional Comments When Verified:
Viscosity (ASTM D 2196) Brookfield RVT with UL adapter, 50 RPM @ 77 deg F, 25 max cps @ 77 deg F 19.2
Specific gravity (ASTM D 1475) 0.90 min @ 77 deg F 1.11
Volatile content (ASTM D 2369) 30% max 3.42
Flash point (ASTM D 3828) more than 180 deg F 180
PCC - SSD bond strength (CA Test 551) 500 psi minimum @ 24 hours 652
Tack free time, 400 minutes max 350