Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 993445 DEA: 101M3504 EFIS: 1020000181
QA Service Level: 1
DIST-CO-RTE-PM: 10-SJ-132-L0.7/5.8
Work Description: REPLACE APPROACH SLAB AND PLACE POLYESTER CONCRETE OVERLAY.
Location Description: SAN JOAQUIN COUNTY NEAR VERNALIS AT VARIOUS LOCATIONS FROM ROUTE 132 EAST/580 SEPARATION TO ROUTE 132/33 SEPARATION AND OVERHEAD
Contractor Name: Truesdell Corporation
Contractor Address: 1310 W. 23rd Street, Tempe, AZ 85282
Resident Engineer: David Abledu Structure Rep.: Kyle Sanford
DIME Sample ID: 2022-06-21-8
TL Number from the TL Form:
Sample Submitted By Organization: Sika Corporation
Sample Organization Contact: (562) 941-0231
Type of Sample: Per Request
Type of Material: Rapid Set
Sample Taken Date: 06/21/2022
Date that the sample was received by the laboratory/organization performing the testing: 06/24/2022
The quantity of what the sample constitutes: 12 Bags
A brief description of the sample: Rapid Setting Mortar
From where was the sample collected: Manufacturer
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Sika - Santa Fe Springs
DIME Test ID: 2022-06-21-8-1
Test Method: CONCLP 2-16: Rapid Set Patching Materials
Verified Date: 08/19/2022
Date Tested: 08/03/2022
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: spencer.adams@dot.ca.gov
Organization Phone: (916) 227-5716
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Compressive Strength @ 3 hrs (CTM 551)
|
4660
|
Compressive Strength @ 24 hrs (CTM 551)
|
5800
|
Flexure Strength @ 24 hrs (CTM 551)
|
0
|
Bond Strength @ 24 hrs - SSD (CTM 551)
|
0
|
Bond Strength @ 24 hrs - Dry (CTM 551)
|
0
|
Water Absorption (CTM 551)
|
0
|
Abrasion @ 24 hrs (CTM 550)
|
23
|
Drying Shrinkage @ 4 days (CTM 596)
|
0
|
Soluble Chlorides (CTM 422)
|
0.0005
|
Water Soluble-Sulfates (CTM 417)
|
0.0534
|
Material Weight
|
50
|
Water Weight
|
5.7
|