Print Report | Back to Sample Detail

Sample Record for 2022-06-02-27

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 993474 DEA: 101N3204 EFIS: 1021000167 QA Service Level: 1
DIST-CO-RTE-PM: 10-TUO-132-R4.7/6.0
Work Description: COLD PLANE EXISTING PAVEMENT AND RESURFACE WITH RHMA.
Location Description: TUOLUMNE COUNTY NEAR HAYWARD FROM 0.7 MILE EAST OF BONDS FLAT ROAD TO LAS PALMAS WAY
Contractor Name: GRANITE CONSTRUCTION COMPANY
Contractor Address: 2716 Granite Court, Fresno, CA 93706
Resident Engineer: Wali Waziri Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2022-06-02-27
TL Number from the TL Form:
Sample Submitted By Organization: CT D10 - District 10 Materials Laboratory
Sample Organization Contact: (209) 948-7567
Type of Sample: Quality Assurance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 06/02/2022
Date that the sample was received by the laboratory/organization performing the testing: 06/06/2022
The quantity of what the sample constitutes: 4 boxes
A brief description of the sample: 1/2 RHMA-G
From where was the sample collected: Manufacturer
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Teichert Materials Vernalis

Material Information

HMA Type: RHMA-G
HMA Grading: 1/2 inch
Lot number: 1
Sublot number: 5
HMA Mix Number:
Test results on following page(s): 2

Test Results

Test 1 of 2

DIME Test ID: 2022-06-02-27-1
Test Method: AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 04/19/2023
Date Tested: 06/14/2022
Submitted By Organization: CT D10 - District 10 Materials Laboratory
Organization Address: 1976 East Dr. Martin Luther King Jr. Boulevard,
Organization City: Stockton
Organization State: CA
Organization Zipcode: 95205
Organization Email: mandeep.dhesi@dot.ca.gov
Organization Phone: (209) 948-7567
General Comments for this Test:
Test Result Compliance: not applicable
Additional Comments When Verified:
Number of tests 1
What is the unit of measurement for theoretical density? US Units
Mass Determination Water
Specific Gravity for Sample 1 2.392
Theoretical maximum density at 25°C (77°F) 148.9 lb/ft^3

Test 2 of 2

DIME Test ID: 2022-06-02-27-2
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 04/19/2023
Date Tested: 06/14/2022
Submitted By Organization: CT D10 - District 10 Materials Laboratory
Organization Address: 1976 East Dr. Martin Luther King Jr. Boulevard,
Organization City: Stockton
Organization State: CA
Organization Zipcode: 95205
Organization Email: mandeep.dhesi@dot.ca.gov
Organization Phone: (209) 948-7567
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
What temperature unit is used? Fahrenheit
Test procedure used? no data
Mass of HMA Sample prior to ignition no data
Corrected Asphalt Binder Content 7.46 %
Mass Loss no data
Correction Factor (Percent by mass of HMA Specimen) 1.00 %
Moisture Content no data
Temperature Compensation Factor no data
Test Temperature no data