Print Report | Back to Sample Detail

Sample Record for 2022-06-07-3

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 88888 DEA: SMTL-STOCK EFIS: SMTL-STOCK QA Service Level:
DIST-CO-RTE-PM: 59---
Work Description: Special project for SMTL stock material. Object Code: 1025. J2 DEA: 912680.
Location Description:
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2022-06-07-3
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Sample Organization Contact: (530) 329-6527
Type of Sample: Proficiency
Type of Material: SMTL TM2 - Type B Elastomeric Joint Seal
Sample Taken Date: 06/07/2022
Date that the sample was received by the laboratory/organization performing the testing: 06/07/2022
The quantity of what the sample constitutes: 4
A brief description of the sample: tensile and Hardness Proficiency Samples
From where was the sample collected: Other
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: CTS

Material Information

Mfg. Lot Number(s): B21 B22 B23 B24
Manufacturer(s): CTS
Temperature: 72
Humidity: 50
Comments:
Joint Seal Size: na
Test results on following page(s): 8

Test Results

Test 1 of 8

DIME Test ID: 2022-06-07-3-1
Test Method: ASTM D2240-05re10: Standard Test Method for Rubber Property - Durometer Hardness
Verified Date: 07/21/2023
Date Tested: 06/08/2022
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: B21
Test Result Compliance:
Additional Comments When Verified:
Temperature 72 f
Humidity 50 %
Reading #1 46
Reading #2 47
Reading #3 46
Reading #4 47
Reading #5 47
Mean 46.6

Test 2 of 8

DIME Test ID: 2022-06-07-3-2
Test Method: ASTM D2240-05re10: Standard Test Method for Rubber Property - Durometer Hardness
Verified Date: 07/21/2023
Date Tested: 06/08/2022
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: B22
Test Result Compliance:
Additional Comments When Verified:
Temperature 72 f
Humidity 50 %
Reading #1 47
Reading #2 46
Reading #3 47
Reading #4 46
Reading #5 47
Mean 46.6

Test 3 of 8

DIME Test ID: 2022-06-07-3-3
Test Method: ASTM D2240-05re10: Standard Test Method for Rubber Property - Durometer Hardness
Verified Date: 07/21/2023
Date Tested: 06/08/2022
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: B23
Test Result Compliance:
Additional Comments When Verified:
Temperature 72 f
Humidity 50 %
Reading #1 47
Reading #2 47
Reading #3 47
Reading #4 47
Reading #5 48
Mean 47.2

Test 4 of 8

DIME Test ID: 2022-06-07-3-4
Test Method: ASTM D2240-05re10: Standard Test Method for Rubber Property - Durometer Hardness
Verified Date: 07/21/2023
Date Tested: 06/08/2022
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: B24
Test Result Compliance:
Additional Comments When Verified:
Temperature 72 f
Humidity 50 %
Reading #1 47
Reading #2 48
Reading #3 47
Reading #4 47
Reading #5 46
Mean 47

Test 5 of 8

DIME Test ID: 2022-06-07-3-5
Test Method: ASTM D412-16r21: Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers-Tension
Verified Date: 07/21/2023
Date Tested: 06/08/2022
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Number of specimens tested 3
Unit of the Ultimate Tensile Values psi
UTM 2kip
Humidity 50.00 %
Temperature 72 F
Sample 1 Median Thickness 0.074
Sample 1 Thickness all Within 0.003 inch? Yes
Sample 1 Ultimate Tensile 3057.5
Sample 1 Elongation (350% Min) Pass
Sample 2 Median Thickness 0.072
Sample 2 Thickness all Within 0.003 inch? Yes
Sample 2 Ultimate Tensile 3105.25
Sample 2 Elongation (350% Min) Pass
Sample 3 Median Thickness 0.073
Sample 3 Thickness all Within 0.003 inch? Yes
Sample 3 Ultimate Tensile 3123.56
Sample 3 Elongation (350% Min) Pass
Median of the Ultimate Tensile Values 3105.3 psi

Test 6 of 8

DIME Test ID: 2022-06-07-3-6
Test Method: ASTM D412-16r21: Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers-Tension
Verified Date: 07/21/2023
Date Tested: 06/08/2022
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Number of specimens tested 3
Unit of the Ultimate Tensile Values psi
UTM 2kip
Humidity 50.00 %
Temperature 72 F
Sample 1 Median Thickness 0.079
Sample 1 Thickness all Within 0.003 inch? Yes
Sample 1 Ultimate Tensile 3025.84
Sample 1 Elongation (350% Min) Pass
Sample 2 Median Thickness 0.074
Sample 2 Thickness all Within 0.003 inch? Yes
Sample 2 Ultimate Tensile 3042.98
Sample 2 Elongation (350% Min) Pass
Sample 3 Median Thickness 0.085
Sample 3 Thickness all Within 0.003 inch? Yes
Sample 3 Ultimate Tensile 3107.23
Sample 3 Elongation (350% Min) Pass
Median of the Ultimate Tensile Values 3043 psi

Test 7 of 8

DIME Test ID: 2022-06-07-3-7
Test Method: ASTM D412-16r21: Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers-Tension
Verified Date: 07/21/2023
Date Tested: 06/08/2022
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Number of specimens tested 3
Unit of the Ultimate Tensile Values psi
UTM 2kip
Humidity 50.00 %
Temperature 72 F
Sample 1 Median Thickness 0.071
Sample 1 Thickness all Within 0.003 inch? Yes
Sample 1 Ultimate Tensile 3056.89
Sample 1 Elongation (350% Min) Pass
Sample 2 Median Thickness 0.071
Sample 2 Thickness all Within 0.003 inch? Yes
Sample 2 Ultimate Tensile 3037.77
Sample 2 Elongation (350% Min) Pass
Sample 3 Median Thickness 0.072
Sample 3 Thickness all Within 0.003 inch? Yes
Sample 3 Ultimate Tensile 3084.62
Sample 3 Elongation (350% Min) Pass
Median of the Ultimate Tensile Values 3056.9 psi

Test 8 of 8

DIME Test ID: 2022-06-07-3-8
Test Method: ASTM D412-16r21: Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers-Tension
Verified Date: 07/21/2023
Date Tested: 06/08/2022
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Number of specimens tested 3
Unit of the Ultimate Tensile Values psi
UTM 2kip
Humidity 50.00 %
Temperature 72 F
Sample 1 Median Thickness 0.072
Sample 1 Thickness all Within 0.003 inch? Yes
Sample 1 Ultimate Tensile 3076.31
Sample 1 Elongation (350% Min) Pass
Sample 2 Median Thickness 0.073
Sample 2 Thickness all Within 0.003 inch? Yes
Sample 2 Ultimate Tensile 2768.38
Sample 2 Elongation (350% Min) Pass
Sample 3 Median Thickness 0.073
Sample 3 Thickness all Within 0.003 inch? Yes
Sample 3 Ultimate Tensile 3043.35
Sample 3 Elongation (350% Min) Pass
Median of the Ultimate Tensile Values 3043.4 psi