Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 215621 DEA: 010J8704 EFIS: 0119000117
QA Service Level: 1
DIST-CO-RTE-PM: 01-MEN-101,271-VAR
Work Description: PLACE HMA, POLYESTER CONCRETE OVERLAY AND COLD PLANE.
Location Description: MENDOCINO COUNTY AT VARIOUS LOCATIONS
Contractor Name: TRUESDELL CORP OF CALIFORNIA INC
Contractor Address: 1310 W 23RD STREET, TEMPE AZ 85282
Resident Engineer: Mike Anderson Structure Rep.: Kari Forbes
DIME Sample ID: 2022-04-29-23
TL Number from the TL Form: 750503
Sample Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Sample Organization Contact: (916) 227-7302
Type of Sample: Department Acceptance
Type of Material: Asphalt Binder
Sample Taken Date: 04/29/2022
Date that the sample was received by the laboratory/organization performing the testing: 05/03/2022
The quantity of what the sample constitutes: 1 can
A brief description of the sample: binder
From where was the sample collected: Source
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Valero - Benicia
Performance Grade: PG 58-22
Modified:
Lot number:
Sublot number:
Tank number:
Time of sample:
HMA Supplier:
Certified Asphalt Supplier: Valero Marketing & Supply - Benicia CA
Multigrade: No
Multigrade Type:
Asphalt Binder Mix Number:
DIME Test ID: 2022-04-29-23-1
Test Method: AASHTO T315-20: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Verified Date: 05/05/2022
Date Tested: 05/05/2022
Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Organization Address: 5900 Folsom Boulevard, Room 225,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (916) 227-7302
General Comments for this Test: OG
Test Result Compliance: does not comply
Additional Comments When Verified:
Phase
|
Original binder
|
Test Plate Diameter
|
25 mm
|
Test Gap
|
1 mm
|
Test Frequency
|
10.0 rad/s
|
Strain Amplitude
|
12.00 %
|
Stress Amplitude
|
0.274 kPa
|
Phase Angle (δ) (for the 10 cycles)
|
83.8 degree
|
Complex Modulus (G*) (for the 10 measurements)
|
2.286 kPa
|
Test Temperature (Specimen 1)
|
58.0 C
|
Dynamic Shear, G*/sin(δ)
|
2.30 kPa
|
DIME Test ID: 2022-04-29-23-2
Test Method: AASHTO T315-20: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Verified Date: 05/05/2022
Date Tested: 05/05/2022
Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Organization Address: 5900 Folsom Boulevard, Room 225,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (916) 227-7302
General Comments for this Test: re-test, 2nd sample
Test Result Compliance: does not comply
Additional Comments When Verified:
Phase
|
Original binder
|
Test Plate Diameter
|
25 mm
|
Test Gap
|
1 mm
|
Test Frequency
|
10.0 rad/s
|
Strain Amplitude
|
12.00 %
|
Stress Amplitude
|
0.275 kPa
|
Phase Angle (δ) (for the 10 cycles)
|
83.8 degree
|
Complex Modulus (G*) (for the 10 measurements)
|
2.294 kPa
|
Test Temperature (Specimen 1)
|
58.0 C
|
Dynamic Shear, G*/sin(δ)
|
2.31 kPa
|