Sample Record for 2022-04-18-17
Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project Information
Project ID: 214681 DEA: 021H5104 EFIS: 0216000148
QA Service Level: 1
DIST-CO-RTE-PM: 02-TEH-99-9.0/9.3
Work Description: CHAMPLIN SLOUGH
Location Description: REPLACE BRIDGE IN TEHAMA COUNTY NEAR LOS MOLINOS FROM 0.2 MILE SOUTH TO 0.2 MILE NORTH OF CHAMPLIN SLOUGH
Contractor Name: VIKING CONSTRUCTION COMPANY, INC.
Contractor Address: 11315 Sunrise Gold Circle, Suite A, Rancho Cordova, CA 95742
Resident Engineer: George Moore Structure Rep.: George Moore
Sample Information
DIME Sample ID: 2022-04-18-17
TL Number from the TL Form:
Sample Submitted By Organization: Con-Fab California Corporation - Lathrop
Sample Organization Contact: (209) 249-4700
Type of Sample: Quality Control
Type of Material: Aggregate
Sample Taken Date: 04/18/2022
Date that the sample was received by the laboratory/organization performing the testing: 04/18/2022
The quantity of what the sample constitutes: 1 Bucket of 1/2", 1 Bucket of 3/8", One Bucket of Sand
A brief description of the sample: Aggregate sampled at Stockpile
From where was the sample collected: Source
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Con-Fab California, LLC
Material Information
Source Identification (SMARA, name of Pit or Job Site): Con-Fab California, LLC
The fabricator's/manufacturer's product name for the sample:
The fabricator/manufacturer designation for the sample:
The plant number:
A detailed description of where the material sample was collected: Stockpile at the Plant
Where the material sample would have been placed if not sampled:
Primary Aggregate Nominal Size: 1/2 inch
The concrete mix design number:
Lot number:
Sublot number:
Aggregate Mix Number:
Test Results
Test 1 of 15
DIME Test ID: 2022-04-18-17-1
Test Method: ASTM C566-19: Standard Test Method for Total Evaporable Moisture Content of Aggregate by Drying
Verified Date: 04/20/2022
Date Tested: 04/18/2022
Submitted By Organization: Con-Fab California Corporation - Lathrop
Organization Address: 1910 Lathrop Road,
Organization City: Lathrop
Organization State: CA
Organization Zipcode: 95330
Organization Email: dannyc@confabca.com
Organization Phone: (209) 249-4717
General Comments for this Test: 1/2" & 3/8" Rocks
Test Result Compliance:
Additional Comments When Verified:
|
Total evaporable moisture content
|
0.4 %
|
Test 2 of 15
DIME Test ID: 2022-04-18-17-2
Test Method: ASTM C566-19: Standard Test Method for Total Evaporable Moisture Content of Aggregate by Drying
Verified Date: 04/20/2022
Date Tested: 04/18/2022
Submitted By Organization: Con-Fab California Corporation - Lathrop
Organization Address: 1910 Lathrop Road,
Organization City: Lathrop
Organization State: CA
Organization Zipcode: 95330
Organization Email: dannyc@confabca.com
Organization Phone: (209) 249-4717
General Comments for this Test: Sand
Test Result Compliance:
Additional Comments When Verified:
|
Total evaporable moisture content
|
3.8 %
|
Test 3 of 15
DIME Test ID: 2022-04-18-17-3
Test Method: ASTM C566-19: Standard Test Method for Total Evaporable Moisture Content of Aggregate by Drying
Verified Date: 04/22/2022
Date Tested: 04/19/2022
Submitted By Organization: Con-Fab California Corporation - Lathrop
Organization Address: 1910 Lathrop Road,
Organization City: Lathrop
Organization State: CA
Organization Zipcode: 95330
Organization Email: dannyc@confabca.com
Organization Phone: (209) 249-4717
General Comments for this Test: Sand
Test Result Compliance:
Additional Comments When Verified:
|
Total evaporable moisture content
|
3.9 %
|
Test 4 of 15
DIME Test ID: 2022-04-18-17-4
Test Method: ASTM C566-19: Standard Test Method for Total Evaporable Moisture Content of Aggregate by Drying
Verified Date: 04/22/2022
Date Tested: 04/19/2022
Submitted By Organization: Con-Fab California Corporation - Lathrop
Organization Address: 1910 Lathrop Road,
Organization City: Lathrop
Organization State: CA
Organization Zipcode: 95330
Organization Email: dannyc@confabca.com
Organization Phone: (209) 249-4717
General Comments for this Test: 1/2" & 3/8" Rocks
Test Result Compliance:
Additional Comments When Verified:
|
Total evaporable moisture content
|
0.3 %
|
Test 5 of 15
DIME Test ID: 2022-04-18-17-5
Test Method: ASTM C566-19: Standard Test Method for Total Evaporable Moisture Content of Aggregate by Drying
Verified Date: 04/22/2022
Date Tested: 04/20/2022
Submitted By Organization: Con-Fab California Corporation - Lathrop
Organization Address: 1910 Lathrop Road,
Organization City: Lathrop
Organization State: CA
Organization Zipcode: 95330
Organization Email: dannyc@confabca.com
Organization Phone: (209) 249-4717
General Comments for this Test: Sand
Test Result Compliance:
Additional Comments When Verified:
|
Total evaporable moisture content
|
3.5 %
|
Test 6 of 15
DIME Test ID: 2022-04-18-17-6
Test Method: ASTM C566-19: Standard Test Method for Total Evaporable Moisture Content of Aggregate by Drying
Verified Date: 04/22/2022
Date Tested: 04/20/2022
Submitted By Organization: Con-Fab California Corporation - Lathrop
Organization Address: 1910 Lathrop Road,
Organization City: Lathrop
Organization State: CA
Organization Zipcode: 95330
Organization Email: dannyc@confabca.com
Organization Phone: (209) 249-4717
General Comments for this Test: 1/2" & 3/8" Rocks
Test Result Compliance:
Additional Comments When Verified:
|
Total evaporable moisture content
|
0.3 %
|
Test 7 of 15
DIME Test ID: 2022-04-18-17-7
Test Method: ASTM C566-19: Standard Test Method for Total Evaporable Moisture Content of Aggregate by Drying
Verified Date: 04/22/2022
Date Tested: 04/21/2022
Submitted By Organization: Con-Fab California Corporation - Lathrop
Organization Address: 1910 Lathrop Road,
Organization City: Lathrop
Organization State: CA
Organization Zipcode: 95330
Organization Email: dannyc@confabca.com
Organization Phone: (209) 249-4717
General Comments for this Test: Sand
Test Result Compliance:
Additional Comments When Verified:
|
Total evaporable moisture content
|
6.3 %
|
Test 8 of 15
DIME Test ID: 2022-04-18-17-8
Test Method: ASTM C566-19: Standard Test Method for Total Evaporable Moisture Content of Aggregate by Drying
Verified Date: 04/22/2022
Date Tested: 04/21/2022
Submitted By Organization: Con-Fab California Corporation - Lathrop
Organization Address: 1910 Lathrop Road,
Organization City: Lathrop
Organization State: CA
Organization Zipcode: 95330
Organization Email: dannyc@confabca.com
Organization Phone: (209) 249-4717
General Comments for this Test: 1/2" & 3/8" Rocks
Test Result Compliance:
Additional Comments When Verified:
|
Total evaporable moisture content
|
0.6 %
|
Test 9 of 15
DIME Test ID: 2022-04-18-17-9
Test Method: ASTM C566-19: Standard Test Method for Total Evaporable Moisture Content of Aggregate by Drying
Verified Date: 04/22/2022
Date Tested: 04/22/2022
Submitted By Organization: Con-Fab California Corporation - Lathrop
Organization Address: 1910 Lathrop Road,
Organization City: Lathrop
Organization State: CA
Organization Zipcode: 95330
Organization Email: dannyc@confabca.com
Organization Phone: (209) 249-4717
General Comments for this Test: Sand
Test Result Compliance:
Additional Comments When Verified:
|
Total evaporable moisture content
|
4.5 %
|
Test 10 of 15
DIME Test ID: 2022-04-18-17-10
Test Method: ASTM C566-19: Standard Test Method for Total Evaporable Moisture Content of Aggregate by Drying
Verified Date: 04/22/2022
Date Tested: 04/22/2022
Submitted By Organization: Con-Fab California Corporation - Lathrop
Organization Address: 1910 Lathrop Road,
Organization City: Lathrop
Organization State: CA
Organization Zipcode: 95330
Organization Email: dannyc@confabca.com
Organization Phone: (209) 249-4717
General Comments for this Test: 1/2" & 3/8" Rocks
Test Result Compliance:
Additional Comments When Verified:
|
Total evaporable moisture content
|
0.4 %
|
Test 11 of 15
DIME Test ID: 2022-04-18-17-11
Test Method: ASTM C136-19: Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates
Verified Date: 04/22/2022
Date Tested: 04/19/2022
Submitted By Organization: Con-Fab California Corporation - Lathrop
Organization Address: 1910 Lathrop Road,
Organization City: Lathrop
Organization State: CA
Organization Zipcode: 95330
Organization Email: dannyc@confabca.com
Organization Phone: (209) 249-4717
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
What type of gradation is being tested?
|
Combined Gradation
|
|
Cumulative percent passing the 2 in. sieve
|
100 %
|
|
Cumulative percent passing the 1 1/2 in. sieve
|
100 %
|
|
Cumulative percent passing the 1 in. sieve
|
100 %
|
|
Cumulative percent passing the 3/4 in. sieve
|
100 %
|
|
Cumulative percent passing the 1/2 in. sieve
|
93.3 %
|
|
Cumulative percent passing the 3/8 in. sieve
|
74.6 %
|
|
Cumulative percent passing the #4 sieve
|
49.7 %
|
Test 12 of 15
DIME Test ID: 2022-04-18-17-12
Test Method: ASTM D2419-14: Standard Test Method for Sand Equivalent Value of Soils and Fine Aggregate
Verified Date: 04/22/2022
Date Tested: 04/20/2022
Submitted By Organization: Con-Fab California Corporation - Lathrop
Organization Address: 1910 Lathrop Road,
Organization City: Lathrop
Organization State: CA
Organization Zipcode: 95330
Organization Email: dannyc@confabca.com
Organization Phone: (209) 249-4717
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Test 13 of 15
DIME Test ID: 2022-04-18-17-13
Test Method: ASTM C117-17: Standard Test Method for Materials Finer than 75-μm (No. 200) Sieve in Mineral Aggregates by Washing
Verified Date: 04/22/2022
Date Tested: 04/19/2022
Submitted By Organization: Con-Fab California Corporation - Lathrop
Organization Address: 1910 Lathrop Road,
Organization City: Lathrop
Organization State: CA
Organization Zipcode: 95330
Organization Email: dannyc@confabca.com
Organization Phone: (209) 249-4717
General Comments for this Test: Sand
Test Result Compliance:
Additional Comments When Verified:
|
Percent finer than No. 200 sieve
|
1 %
|
Test 14 of 15
DIME Test ID: 2022-04-18-17-14
Test Method: ASTM C117-17: Standard Test Method for Materials Finer than 75-μm (No. 200) Sieve in Mineral Aggregates by Washing
Verified Date: 04/22/2022
Date Tested: 04/19/2022
Submitted By Organization: Con-Fab California Corporation - Lathrop
Organization Address: 1910 Lathrop Road,
Organization City: Lathrop
Organization State: CA
Organization Zipcode: 95330
Organization Email: dannyc@confabca.com
Organization Phone: (209) 249-4717
General Comments for this Test: 3/8" Rocks
Test Result Compliance:
Additional Comments When Verified:
|
Percent finer than No. 200 sieve
|
1.2 %
|
Test 15 of 15
DIME Test ID: 2022-04-18-17-15
Test Method: ASTM C117-17: Standard Test Method for Materials Finer than 75-μm (No. 200) Sieve in Mineral Aggregates by Washing
Verified Date: 04/22/2022
Date Tested: 04/19/2022
Submitted By Organization: Con-Fab California Corporation - Lathrop
Organization Address: 1910 Lathrop Road,
Organization City: Lathrop
Organization State: CA
Organization Zipcode: 95330
Organization Email: dannyc@confabca.com
Organization Phone: (209) 249-4717
General Comments for this Test: 1/2" Rocks
Test Result Compliance:
Additional Comments When Verified:
|
Percent finer than No. 200 sieve
|
1.2 %
|
