Sample Record for 2022-03-29-3
Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project Information
Project ID: 993131 DEA: 010A1104 EFIS: 0112000211
QA Service Level: 1
DIST-CO-RTE-PM: 01-HUM-101-27.7
Work Description: BRIDGE SEISMIC RETROFIT AND ROCK SLOPE PROTECTION.
Location Description: HUMBOLDT COUNTY NEAR MYERS FLAT AT SOUTH FORK EEL RIVER BRIDGE
Contractor Name: MERCER-FRASER COMPANY
Contractor Address: 77 2nd St, Eureka, CA 95501
Resident Engineer: Joaquin Rodriguez Structure Rep.: George Moore
Sample Information
DIME Sample ID: 2022-03-29-3
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - QASI Bay Area Field Office
Sample Organization Contact: (916) 284-6784
Type of Sample: Quality Control
Type of Material: SMTL TM3 - Fastener Assembly
Sample Taken Date: 03/29/2022
Date that the sample was received by the laboratory/organization performing the testing: 04/06/2022
The quantity of what the sample constitutes: 135
A brief description of the sample: 1-1/8"x5-3/4" A325 Bolts
From where was the sample collected: Distributor
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: St Louis Screw and Bolt
Material Information
Rocap Number(s): TT0151870
Heat Number(s): 20358600
Nut Mfg. Lot Number(s): 32858-201231
Washer Mfg. Lot Number(s): 1221-158
Bolt Specification: ASTM A325-1
Bolt Length(s): 5-3/4"
Nut Specification: ASTM A563 DH
Washer Specification: ASTM F436-1
Finish: ASTM B695 - Mech Galv
Diameter/Size: 1-1/8"
Bolt Mfg. Lot Number: BM0303
Rocap Test Requirement(s):
Lubricant Requirements(s):
Test Results
Test 1 of 19
DIME Test ID: 2022-03-29-3-1
Test Method: ASTM F606-21: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)
Verified Date: 04/28/2022
Date Tested: 04/21/2022
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: A325 Wedge Tensile
Test Result Compliance:
Additional Comments When Verified:
|
Number of Bolt Samples
|
1
|
| Sample | Bolt Mfg. Lot Number | Size (in) | Peak Load (lbf) | Peak Load (kN) | Wedge Angle (deg) | Comments | Tested By | | 1A | BM0303 | 1.1250 | 99688 | 443.43 | 6.00 | A325 Wedge Tensile | spaine |
| |
|
UTM
|
450kip
|
|
Temperature
|
no data
|
Test 2 of 19
DIME Test ID: 2022-03-29-3-2
Test Method: ASTM F606-21: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)
Verified Date: 04/28/2022
Date Tested: 04/21/2022
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Nut Proof Load
Test Result Compliance:
Additional Comments When Verified:
|
Number of Samples
|
1
|
| Sample | Bolt Mfg. Lot Number | Size (in) | Peak Load (lbf) | Peak Load (kN) | Comments | Tested By | | 1A | 32858-201231 | | 119060 | | Nut Proof Load | spaine |
| |
|
UTM
|
450kip
|
|
Temperature
|
72 f
|
Test 3 of 19
DIME Test ID: 2022-03-29-3-3
Test Method: ASME B1.2-83r17: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 04/28/2022
Date Tested: 04/22/2022
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
BM0303
|
|
Finish Coating
|
ASTM B695 - Mech Galv
|
|
Product Markings
|
A325 USA SL
|
|
Size
|
1.125 in
|
|
Bolt Length
|
5.75 in
|
|
Gage Type
|
Pass
|
Test 4 of 19
DIME Test ID: 2022-03-29-3-4
Test Method: ASME B1.2-83r17: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 04/28/2022
Date Tested: 04/22/2022
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1B
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
BM0303
|
|
Finish Coating
|
ASTM B695 - Mech Galv
|
|
Product Markings
|
A325 USA SL
|
|
Size
|
1.125 in
|
|
Bolt Length
|
5.75 in
|
|
Gage Type
|
Pass
|
Test 5 of 19
DIME Test ID: 2022-03-29-3-5
Test Method: ASME B1.2-83r17: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 04/28/2022
Date Tested: 04/22/2022
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1C
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
BM0303
|
|
Finish Coating
|
ASTM B695 - Mech Galv
|
|
Product Markings
|
A325 USA SL
|
|
Size
|
1.125 in
|
|
Bolt Length
|
5.75 in
|
|
Gage Type
|
Pass
|
Test 6 of 19
DIME Test ID: 2022-03-29-3-6
Test Method: ASME B1.2-83r17: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 04/28/2022
Date Tested: 04/22/2022
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
32858-201231
|
|
Finish Coating
|
ASTM B695 - Mech Galv
|
|
Product Markings
|
DH U
|
|
Size
|
1.125 in
|
|
Gage Type
|
NA
|
Test 7 of 19
DIME Test ID: 2022-03-29-3-7
Test Method: ASME B1.2-83r17: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 04/28/2022
Date Tested: 04/22/2022
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1B
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
32858-201231
|
|
Finish Coating
|
ASTM B695 - Mech Galv
|
|
Product Markings
|
DH U
|
|
Size
|
1.125 in
|
|
Gage Type
|
NA
|
Test 8 of 19
DIME Test ID: 2022-03-29-3-8
Test Method: ASME B1.2-83r17: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 04/28/2022
Date Tested: 04/22/2022
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1C
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
32858-201231
|
|
Finish Coating
|
ASTM B695 - Mech Galv
|
|
Product Markings
|
DH U
|
|
Size
|
1.125 in
|
|
Gage Type
|
NA
|
Test 9 of 19
DIME Test ID: 2022-03-29-3-9
Test Method: ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 04/28/2022
Date Tested: 04/22/2022
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
BM0303
|
|
Finish Coating
|
ASTM B695 - Mech Galv
|
|
Product Markings
|
A325 USA SL
|
|
Size
|
1.125 in
|
|
Bolt Length
|
5.75 in
|
|
Measurement Average
|
2.11 mils
|
Test 10 of 19
DIME Test ID: 2022-03-29-3-10
Test Method: ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 04/28/2022
Date Tested: 04/22/2022
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1B
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
BM0303
|
|
Finish Coating
|
ASTM B695 - Mech Galv
|
|
Product Markings
|
A325 USA SL
|
|
Size
|
1.125 in
|
|
Bolt Length
|
5.75 in
|
|
Measurement Average
|
2.27 mils
|
Test 11 of 19
DIME Test ID: 2022-03-29-3-11
Test Method: ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 04/28/2022
Date Tested: 04/22/2022
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1C
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
BM0303
|
|
Finish Coating
|
ASTM B695 - Mech Galv
|
|
Product Markings
|
A325 USA SL
|
|
Size
|
1.125 in
|
|
Bolt Length
|
5.75 in
|
|
Measurement Average
|
2.19 mils
|
Test 12 of 19
DIME Test ID: 2022-03-29-3-12
Test Method: ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 04/28/2022
Date Tested: 04/22/2022
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
32858-201231
|
|
Finish Coating
|
ASTM B695 - Mech Galv
|
|
Product Markings
|
DH U
|
|
Size
|
1.125 in
|
|
Bolt Length
|
no data in
|
|
Measurement Average
|
2.17 mils
|
Test 13 of 19
DIME Test ID: 2022-03-29-3-13
Test Method: ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 04/28/2022
Date Tested: 04/22/2022
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1B
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
32858-201231
|
|
Finish Coating
|
ASTM B695 - Mech Galv
|
|
Product Markings
|
DH U
|
|
Size
|
1.125 in
|
|
Bolt Length
|
no data in
|
|
Measurement Average
|
2.1 mils
|
Test 14 of 19
DIME Test ID: 2022-03-29-3-14
Test Method: ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 04/28/2022
Date Tested: 04/22/2022
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1C
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
32858-201231
|
|
Finish Coating
|
ASTM B695 - Mech Galv
|
|
Product Markings
|
DH U
|
|
Size
|
1.125 in
|
|
Bolt Length
|
no data in
|
|
Measurement Average
|
2.11 mils
|
Test 15 of 19
DIME Test ID: 2022-03-29-3-15
Test Method: ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 04/28/2022
Date Tested: 04/22/2022
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
1221-158
|
|
Finish Coating
|
ASTM B695 - Mech Galv
|
|
Product Markings
|
F436 TSI
|
|
Size
|
1.125 in
|
|
Bolt Length
|
no data in
|
|
Measurement Average
|
2.15 mils
|
Test 16 of 19
DIME Test ID: 2022-03-29-3-16
Test Method: ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 04/28/2022
Date Tested: 04/22/2022
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1B
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
1221-158
|
|
Finish Coating
|
ASTM B695 - Mech Galv
|
|
Product Markings
|
F436 TSI
|
|
Size
|
1.125 in
|
|
Bolt Length
|
no data in
|
|
Measurement Average
|
2.18 mils
|
Test 17 of 19
DIME Test ID: 2022-03-29-3-17
Test Method: ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 04/28/2022
Date Tested: 04/22/2022
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1C
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
1221-158
|
|
Finish Coating
|
ASTM B695 - Mech Galv
|
|
Product Markings
|
F436 TSI
|
|
Size
|
1.125 in
|
|
Bolt Length
|
no data in
|
|
Measurement Average
|
2.18 mils
|
Test 18 of 19
DIME Test ID: 2022-03-29-3-18
Test Method: ASTM E18-20: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 04/28/2022
Date Tested: 04/22/2022
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
1221-158
|
|
Finish Coating
|
ASTM B695 - Mech Galv
|
|
Product Markings
|
F436 TSI
|
|
Size
|
1.125 in
|
|
Bolt Length
|
no data in
|
|
Hardness Reading Scale
|
C Scale
|
|
Hardness Reading Average
|
42.1
|
|
Spacing
|
Ok
|
Test 19 of 19
DIME Test ID: 2022-03-29-3-19
Test Method: ASTM E18-20: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 04/28/2022
Date Tested: 04/22/2022
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1B
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
1221-158
|
|
Finish Coating
|
ASTM B695 - Mech Galv
|
|
Product Markings
|
F436 TSI
|
|
Size
|
1.125 in
|
|
Bolt Length
|
no data in
|
|
Hardness Reading Scale
|
C Scale
|
|
Hardness Reading Average
|
38.85
|
|
Spacing
|
Ok
|
