Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 66667 DEA: JMFPP EFIS: 0019000043
QA Service Level:
DIST-CO-RTE-PM: 59---
Work Description: Special project for submitting Sample information for JMF Prequalification Program.
Location Description:
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown
DIME Sample ID: 2022-03-17-23
TL Number from the TL Form: 708110
Sample Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Sample Organization Contact: (530) 225-3194
Type of Sample: Annual Source Testing
Type of Material: Aggregate
Sample Taken Date: 03/17/2022
Date that the sample was received by the laboratory/organization performing the testing: 03/21/2022
The quantity of what the sample constitutes: JMF Verification
A brief description of the sample: 3 bags of Untreated 3/8″ Sized Virgin Aggregate for use in 3/4-inch Type A HMA
From where was the sample collected: Manufacturer
Laboratory sample identification: D79009B
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Tullis – Northstate Asphalt (Redding, CA)
Source Identification (SMARA, name of Pit or Job Site): 91-45-0057::Shasta Ranch Aggregates
The fabricator's/manufacturer's product name for the sample:
The fabricator/manufacturer designation for the sample:
The plant number:
A detailed description of where the material sample was collected: Sized Untreated Aggregate Stockpile
Where the material sample would have been placed if not sampled:
Primary Aggregate Nominal Size: 3/8 inch
The concrete mix design number:
Lot number:
Sublot number:
Aggregate Mix Number:
DIME Test ID: 2022-03-17-23-1
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Verified Date: 04/18/2022
Date Tested: 03/22/2022
Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Organization Address: 1657 Riverside Drive,
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: 530-225-3194
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
What type of gradation is being tested?
|
HMA Gradation
|
Cumulative percent passing the 1 1/2 in. sieve
|
100 %
|
Cumulative percent passing the 1 in. sieve
|
100 %
|
Cumulative percent passing the 3/4 in. sieve
|
100 %
|
Cumulative percent passing the 1/2 in. sieve
|
99.9 %
|
Cumulative percent passing the 3/8 in. sieve
|
99.2 %
|
Cumulative percent passing the 1/4 in. sieve
|
50.9 %
|
Cumulative percent passing the #4 sieve
|
20.3 %
|
Cumulative percent passing the #8 sieve
|
3.2 %
|
Cumulative percent passing the #16 sieve
|
2.3 %
|
Cumulative percent passing the #30 sieve
|
1.8 %
|
Cumulative percent passing the #50 sieve
|
1.4 %
|
Cumulative percent passing the #100 sieve
|
1.2 %
|
Cumulative percent passing the #200 sieve
|
0.97 %
|
DIME Test ID: 2022-03-17-23-2
Test Method: AASHTO T104-99r16: Standard Method of Test for Soundness of Aggregate by Use of Sodium Sulfate or Magnesium Sulfate (Soundness)
Verified Date: 05/04/2022
Date Tested: 05/02/2022
Submitted By Organization: CT HQ - Sacramento Aggregate Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: ryan.kester@dot.ca.gov
Organization Phone: (916) 227-7215
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Size of aggregate being tested
|
Fine Aggregate
|
What type of solution was used?
|
Sodium sulfate
|
What was the condition of the solution?
|
Previously used
|
Number of immersion cycles performed
|
5
|
Fine weighted average loss
|
3 %
|