Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 993470 DEA: 032G2804 EFIS: 0321000078
QA Service Level: 1
DIST-CO-RTE-PM: 03-ED-50-0.8/R1.9L
Work Description: PLACE POLYESTER CONCRETE OVERLAY.
Location Description: EL DORADO COUNTY AT AND NEAR EL DORADO HILLS AT VARIOUS LOCATIONS FROM LATROBE ROAD UNDERCROSSING TO CARSON CREEK WESTBOUND ROUTE 50 OFF-RAMP
Contractor Name: MYERS AND SONS CONSTRUCTION, LLC
Contractor Address: 45 Morrison Ave, Sacramento, CA 95838
Resident Engineer: Juanah Koker Structure Rep.: Unknown
DIME Sample ID: 2022-03-21-11
TL Number from the TL Form: Sacramento Caltrans lab
Sample Submitted By Organization: Kwik Bond Polymers
Sample Organization Contact: (760) 518-6064
Type of Sample: Quality Control
Type of Material: Polyester
Sample Taken Date: 03/21/2022
Date that the sample was received by the laboratory/organization performing the testing: 03/21/2022
The quantity of what the sample constitutes: 10 Tankers
A brief description of the sample: 1 gallon can
From where was the sample collected: Source
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Kwik Bond Polymers and Polynt
DIME Test ID: 2022-03-21-11-1
Test Method: ASTM D1475-Nov13: Standard Test Method For Density of Liquid Coatings, Inks, and Related Products
Verified Date: 05/17/2022
Date Tested: 03/30/2022
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: spencer.adams@dot.ca.gov
Organization Phone: (916) 227-5716
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
|
Density Units
|
pounds/gallons
|
|
Liquid Density (pounds per gallon)
|
9
|
DIME Test ID: 2022-03-21-11-2
Test Method: ASTM D2196-Feb15: Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational Viscometer
Verified Date: 05/17/2022
Date Tested: 03/30/2022
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: spencer.adams@dot.ca.gov
Organization Phone: (916) 227-5716
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
DIME Test ID: 2022-03-21-11-3
Test Method: ASTM D2369-Jul10: Standard Test Method for Volatile Content of Coatings
Verified Date: 05/17/2022
Date Tested: 03/30/2022
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: spencer.adams@dot.ca.gov
Organization Phone: (916) 227-5716
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
|
Mean of two volatile content determination
|
46.4
|
DIME Test ID: 2022-03-21-11-4
Test Method: ASTM D638-Dec14: Standard Test Method for Tensile Properties of Plastics
Verified Date: 05/17/2022
Date Tested: 03/24/2022
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: spencer.adams@dot.ca.gov
Organization Phone: (916) 227-5716
General Comments for this Test: Accepted supplier's results.
Test Result Compliance: complies
Additional Comments When Verified:
|
Number of specimens tested
|
6
|
|
Conditioning procedure
|
18/25/50+5/70
|
|
Speed of testing
|
0.45 in/min
|
|
Sample 1 Width
|
0.26 in
|
|
Sample 1 Ultimate strength
|
2825.7 psi
|
|
Sample 1 Thickness
|
0.49 in
|
|
Sample 1 Area
|
0.1274 in^2
|
|
Sample 1 Ultimate Strength Actual
|
360 lbs
|
|
Sample 1 percent elongation
|
58.9 %
|
|
Sample 1 Time
|
0 MM:SS
|
|
Sample 2 Width
|
0.25 in
|
|
Sample 2 Thickness
|
0.49 in
|
|
Sample 2 Area
|
0.1225 in^2
|
|
Sample 2 Ultimate strength
|
2914.3 psi
|
|
Sample 2 Ultimate Strength Actual
|
357 lbs
|
|
Sample 2 percent elongation
|
61.5 %
|
|
Sample 2 Time
|
0 MM:SS
|
|
Sample 3 Width
|
0.24 in
|
|
Sample 3 Thickness
|
0.49 in
|
|
Sample 3 Area
|
0.1176 in^2
|
|
Sample 3 Ultimate strength
|
2908.2 psi
|
|
Sample 3 Ultimate Strength Actual
|
342 lbs
|
|
Sample 3 percent elongation
|
61.1 %
|
|
Sample 3 Time
|
0 MM:SS
|
|
Sample 4 Width
|
0.24 in
|
|
Sample 4 Thickness
|
0.49 in
|
|
Sample 4 Area
|
0.1176 in^2
|
|
Sample 4 Ultimate strength
|
3018.7 psi
|
|
Sample 4 Ultimate Strength Actual
|
355 lbs
|
|
Sample 4 percent elongation
|
64.6 %
|
|
Sample 4 Time
|
0 MM:SS
|
|
Sample 5 Width
|
0.25 in
|
|
Sample 5 Thickness
|
0.49 in
|
|
Sample 5 Area
|
0.1225 in^2
|
|
Sample 5 Ultimate strength
|
2808.2 psi
|
|
Sample 5 Ultimate Strength Actual
|
344 lbs
|
|
Sample 5 percent elongation
|
58.1 %
|
|
Sample 5 Time
|
0 MM:SS
|
|
Sample 6 Width
|
0.24 in
|
|
Sample 6 Thickness
|
0.49 in
|
|
Sample 6 Area
|
0.1176 in^2
|
|
Sample 6 Ultimate strength
|
2993.2 psi
|
|
Sample 6 Ultimate Strength Actual
|
352 lbs
|
|
Sample 6 percent elongation
|
62.3 %
|
|
Sample 6 Time
|
0 MM:SS
|
|
Ultimate Strength Average
|
2911 psi
|
|
Percent Elongation Average
|
61 %
|
DIME Test ID: 2022-03-21-11-5
Test Method: CTM 551-August 2012: Method of Test for Determining Suitability of Materials for Overlayment and Repair of Portland Cement Concrete Pavements and Structures
Verified Date: 05/17/2022
Date Tested: 03/23/2022
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: spencer.adams@dot.ca.gov
Organization Phone: (916) 227-5716
General Comments for this Test: Accepted supplier's results.
Test Result Compliance: complies
Additional Comments When Verified:
|
Curing history for Sample 1
|
24hr
|
|
Maximum applied load (P) for Sample 1
|
1478 lb
|
|
Span length for Sample 1
|
9 in
|
|
Break location for Sample 1
|
PCC
|
|
Specimen defects/notes for Sample 1
|
no data
|
|
Surface type for Sample 1
|
SSD
|
|
Modulus of rupture (R) for Sample 1
|
739 psi
|
|
Curing history for Sample 2
|
24hr
|
|
Maximum applied load (P) for Sample 2
|
1468 lb
|
|
Span length for Sample 2
|
9 in
|
|
Break location for Sample 2
|
PCC
|
|
Specimen defects/notes for Sample 2
|
no data
|
|
Surface type for Sample 2
|
SSD
|
|
Modulus of rupture (R) for Sample 2
|
734 psi
|
|
Curing history for Sample 3
|
24hr
|
|
Maximum applied load (P) for Sample 3
|
1442 lb
|
|
Span length for Sample 3
|
9 in
|
|
Break location for Sample 3
|
PCC
|
|
Specimen defects/notes for Sample 3
|
no data
|
|
Surface type for Sample 3
|
SSD
|
|
Modulus of rupture (R) for Sample 3
|
721 psi
|
DIME Test ID: 2022-03-21-11-6
Test Method: SCAQMD 309-91-Feb93: Determination of Static Volatile Emissions
Verified Date: 05/17/2022
Date Tested: 03/22/2022
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: spencer.adams@dot.ca.gov
Organization Phone: (916) 227-5716
General Comments for this Test: Accepted supplier's results.
Test Result Compliance: complies
Additional Comments When Verified:
|
Diameter of lid
|
153.9 mm
|
|
Room Temperature
|
77 f
|
|
Tare weight
|
no data
|
|
Initial weight
|
100 grams
|
|
Weight at 5 minutes
|
99.965 grams
|
|
Weight at 10 minutes
|
99.876 grams
|
|
Weight at 15 minutes
|
99.779 grams
|
|
Weight at 20 minutes
|
99.748 grams
|
|
Weight at 25 minutes
|
99.677 grams
|
|
Weight at 30 minutes
|
99.61 grams
|
|
Final weight
|
99.61 grams
|
|
Total weight loss
|
0.39 grams
|
|
Calculated radius of gallon can lid in cm
|
7.695 cm
|
|
Lid Factor
|
53.757 m^2
|
|
Volatile emission
|
20.965 grams/m^2
|
