Print Report | Back to Sample Detail

Sample Record for 2022-03-21-9

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 214099 DEA: 024F5904 EFIS: 0213000010 QA Service Level: 1
DIST-CO-RTE-PM: 02-TEH-5-R25.4
Work Description: BRIDGE SEISMIC RETROFIT AND SCOUR REPAIR.
Location Description: TEHAMA COUNTY IN RED BLUFF AT SACRAMENTO RIVER BRIDGE
Contractor Name: Golden State Bridge
Contractor Address: 3701 Mallard Drive, Benicia, CA 94510
Resident Engineer: Mike Z'denek Structure Rep.: Ryan Duran

Sample Information

DIME Sample ID: 2022-03-21-9
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - QASI Bay Area Field Office
Sample Organization Contact: (916) 284-6784
Type of Sample: Quality Assurance
Type of Material: SMTL TM3 - Fastener Assembly
Sample Taken Date: 03/21/2022
Date that the sample was received by the laboratory/organization performing the testing: 04/06/2022
The quantity of what the sample constitutes: 23 ea 5/8"x 2" A325 hdg fastener assemblies
A brief description of the sample: 5/8" x 2" hdg A325 fasteners bolts nuts and washers
From where was the sample collected: Fabricator
Laboratory sample identification:
Structure unique identifier: 08-0095 L/R
Structure name: Sac River Bridge I5
The fabricator/manufacturer/facility name: C&K Johnson

Material Information

Rocap Number(s): 452107AR
Heat Number(s): Bolt 100105997 Nut 100898218 Washer 32023190
Nut Mfg. Lot Number(s): 458875A
Washer Mfg. Lot Number(s): D9927
Bolt Specification: A325
Bolt Length(s): 2"
Nut Specification: A563 gr DH
Washer Specification: F436
Finish: HDG
Diameter/Size: 5/8"
Bolt Mfg. Lot Number: 452107A
Rocap Test Requirement(s): yes
Lubricant Requirements(s): yes
Test results on following page(s): 8

Test Results

Test 1 of 8

DIME Test ID: 2022-03-21-9-1
Test Method: ASTM F606-21: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)
Verified Date: 04/21/2022
Date Tested: 04/19/2022
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Nut Proof Load
Test Result Compliance:
Additional Comments When Verified:
Number of Samples 1
SampleBolt Mfg. Lot NumberSize (in)Peak Load (lbf)Peak Load (kN)CommentsTested By
1A458875A36052Nut Proof Loadspaine
UTM 450kip
Temperature 72 f

Test 2 of 8

DIME Test ID: 2022-03-21-9-2
Test Method: ASME B1.2-83r17: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 04/21/2022
Date Tested: 04/20/2022
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 452107A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 USA N
Size .625 in
Bolt Length 2 in
Gage Type Pass

Test 3 of 8

DIME Test ID: 2022-03-21-9-3
Test Method: ASME B1.2-83r17: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 04/21/2022
Date Tested: 04/20/2022
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 458875A
Finish Coating ASTM F2329 - Hot Dip
Product Markings DH N
Size .625 in
Gage Type Pass

Test 4 of 8

DIME Test ID: 2022-03-21-9-4
Test Method: ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 04/21/2022
Date Tested: 04/20/2022
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 452107A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 USA N
Size .625 in
Bolt Length 2 in
Measurement Average 2.22 mils

Test 5 of 8

DIME Test ID: 2022-03-21-9-5
Test Method: ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 04/21/2022
Date Tested: 04/20/2022
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 458875A
Finish Coating ASTM F2329 - Hot Dip
Product Markings DH N
Size .625 in
Bolt Length no data in
Measurement Average 2.15 mils

Test 6 of 8

DIME Test ID: 2022-03-21-9-6
Test Method: ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 04/21/2022
Date Tested: 04/20/2022
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number D9927
Finish Coating ASTM F2329 - Hot Dip
Product Markings F436 P
Size .625 in
Bolt Length no data in
Measurement Average 2.24 mils

Test 7 of 8

DIME Test ID: 2022-03-21-9-7
Test Method: ASTM E18-20: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 04/21/2022
Date Tested: 04/20/2022
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 452107A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 USA N
Size .625 in
Bolt Length 2 in
Hardness Reading Scale C Scale
Hardness Reading Average 28.77
Spacing Ok

Test 8 of 8

DIME Test ID: 2022-03-21-9-8
Test Method: ASTM E18-20: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 04/21/2022
Date Tested: 04/20/2022
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number D9927
Finish Coating ASTM F2329 - Hot Dip
Product Markings F436 P
Size .625 in
Bolt Length no data in
Hardness Reading Scale C Scale
Hardness Reading Average 41.35
Spacing Ok