DEPARTMENT OF TRANSPORTATION
DIVISION OF ENGINEERING SERVICES
MATERIALS ENGINEERING AND TESTING SERVICES
Concrete Materials Testing Branch
5900 Folsom Blvd.
Sacramento, CA 95819
916-227-7205
Contract # 033E1004 Cty PLA Rte 80 PM 8.1/37.8
Vendor #
|
Gavin Newsom, Governor |
DEPARTMENT OF TRANSPORTATIONDIVISION OF ENGINEERING SERVICES MATERIALS ENGINEERING AND TESTING SERVICES Concrete Materials Testing Branch 5900 Folsom Blvd. Sacramento, CA 95819 916-227-7205 |
Contract # 033E1004 Cty PLA Rte 80 PM 8.1/37.8 Vendor # |
|
REPORT OF LABORATORY TESTING |
||||
|
Resident Engineer: |
Martin Clark |
Date Reported: |
11/24/2014 |
|
|
Address: |
TL Number: |
|
||
|
City: |
||||
|
Project Name: IMPROVING VERTICAL CLEARANCE |
||||
|
Prime Contractor: RGW Construction Inc |
||||
|
Sample Taken Date: |
11/18/2014 |
Mix Design: |
J7A8543CC NE |
|
|
Contractor: Unknown |
Location : PLACER COUNTY IN AND NEAR LOOMIS, PENRYN, NEWCASTLE, WEIMAR, AND MAGRA FROM 0.1 MILE WEST OF BRACE ROAD OVERCROSSING TO 0.1 MILE EAST OF MAGRA OVERCROSSING |
|||
|
Structure unique identifier: |
||||
|
Structure name: |
||||
|
Location of Pour: |
||||
The following testing has been tested in accordance with:
ASTM C39-10 : Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
Capped in accordance with ASTM C617/CTM521
Cured in accordance with ASTM C511
| Specimen | Cross sectional area of cylinder (in^2) | Average diameter of cylinder (in) | Compressive strength of cylinder (psi) | Maximum load on cylinder (lb) | Type of fracture pattern of cylinder |
|---|---|---|---|---|---|
| 1 | 28.27 | 6.00 | 1260.7 | 35639 | 1 |
| 2 | 28.27 | 6.00 | 1156.0 | 32681 | 1 |
DIME Test ID: 2014-11-18-1-1
Number of specimens: 2
Compressive strength (to nearest 10 psi): 1210
Age of specimen: 1 day
Certified By: She Vang
ASTM C39-10 : Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
Capped in accordance with ASTM C617/CTM521
Cured in accordance with ASTM C511
| Specimen | Cross sectional area of cylinder (in^2) | Average diameter of cylinder (in) | Compressive strength of cylinder (psi) | Maximum load on cylinder (lb) | Type of fracture pattern of cylinder |
|---|---|---|---|---|---|
| 1 | 28.37 | 6.01 | 1896.8 | 53813 | 1 |
| 2 | 28.37 | 6.01 | 1943.1 | 55125 | 1 |
DIME Test ID: 2014-11-18-1-2
Number of specimens: 2
Compressive strength (to nearest 10 psi): 1920
Age of specimen: 2 days
Certified By: She Vang
ASTM C39-10 : Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
Capped in accordance with ASTM C617/CTM521
Cured in accordance with ASTM C511
| Specimen | Cross sectional area of cylinder (in^2) | Average diameter of cylinder (in) | Compressive strength of cylinder (psi) | Maximum load on cylinder (lb) | Type of fracture pattern of cylinder |
|---|---|---|---|---|---|
| 1 | 28.27 | 6.00 | 2594.5 | 73347 | 1 |
| 2 | 28.37 | 6.01 | 2544.7 | 72192 | 1 |
DIME Test ID: 2014-11-18-1-3
Number of specimens: 2
Compressive strength (to nearest 10 psi): 2570
Age of specimen: 3 days
Certified By: Bang Nguyen
ASTM C39-10 : Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
Capped in accordance with ASTM C617/CTM521
Cured in accordance with ASTM C511
| Specimen | Cross sectional area of cylinder (in^2) | Average diameter of cylinder (in) | Compressive strength of cylinder (psi) | Maximum load on cylinder (lb) | Type of fracture pattern of cylinder |
|---|---|---|---|---|---|
| 1 | 28.46 | 6.02 | 4036.4 | 114877 | 1 |
| 2 | 28.37 | 6.01 | 4041.6 | 114660 | 1 |
DIME Test ID: 2014-11-18-1-4
Number of specimens: 2
Compressive strength (to nearest 10 psi): 4040
Age of specimen: 6 days
Certified By: Larry McCrum
|
*Subject to final inspection by the Resident Engineer. |
|
TL- Report of Laboratory Testing