Print Report | Back to Sample Detail

Sample Record for 2021-11-17-12

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 215601 DEA: 024H3404 EFIS: 0218000109 QA Service Level: 1
DIST-CO-RTE-PM: 02-TRI-299-5.2/5.7
Work Description: INSTALL LEFT TURN LANE.
Location Description: TRINITY COUNTY NEAR SALYER FROM 0.3 MILE WEST OF DENNY ROAD TO 0.2 MILE WEST OF PONY BAR CREEK BRIDGE
Contractor Name: MERCER-FRASER COMPANY
Contractor Address: 77 2nd St, Eureka, CA 95501
Resident Engineer: Joel Gasik Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2021-11-17-12
TL Number from the TL Form: 858998
Sample Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Sample Organization Contact: (530) 225-3194
Type of Sample: Acceptance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 11/17/2021
Date that the sample was received by the laboratory/organization performing the testing: 11/24/2021
The quantity of what the sample constitutes: 750 Tons
A brief description of the sample: Lime Treated 1/2-Inch Type A HMA (PG 64-28 M) with binder from Valero - Benicia
From where was the sample collected: Manufacturer
Laboratory sample identification: D78982
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Mercer-Fraser - Willow Creek Plant - Willow Creek, CA

Material Information

HMA Type: Type A HMA
HMA Grading: 1/2 inch
Lot number: Unknown
Sublot number: Unknown
HMA Mix Number:

Test Results

Test 1 of 1

DIME Test ID: 2021-11-17-12-1
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 11/29/2021
Date Tested: 11/24/2021
Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Organization Address: 1657 Riverside Drive,
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: 530-225-3194
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
What temperature unit is used? Fahrenheit
Test procedure used? no data
Mass of HMA Sample prior to ignition no data
Corrected Asphalt Binder Content 5.33 %
Mass Loss no data
Correction Factor (Percent by mass of HMA Specimen) 0.57 %
Moisture Content no data
Temperature Compensation Factor no data
Test Temperature no data