Print Report | Back to Sample Detail

Sample Record for 2021-09-09-46

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 214586 DEA: 081H7704 EFIS: 0817000132 QA Service Level: 1
DIST-CO-RTE-PM: 08-SBD-215-4.5/5.8
Work Description: INSTALL SIGN STRUCTURE, HMA, MODIFY RAMP METERING AND RETAINING WALL.
Location Description: SAN BENARDINO COUNTY IN SAN BERNARDINO FROM 0.5 MILE SOUTH OR ORANGE SHOW ROAD/AUTO PLAZA DRIVE OVERCROSSING TO 0.2 MILE NORTH OF INLAND CENTER DRIVE OVERCROSSING
Contractor Name: BEADOR CONSTRUCTION COMPANY INC
Contractor Address: 26320 LESTER CIRCLE, CORONA, CA 92883
Resident Engineer: Nicholas Mineo Structure Rep.: Sylvia Stracner

Sample Information

DIME Sample ID: 2021-09-09-46
TL Number from the TL Form:
Sample Submitted By Organization: CT D08 - Barstow Field Laboratory 1
Sample Organization Contact: (760) 252-9216
Type of Sample: Quality Assurance
Type of Material: Aggregate
Sample Taken Date: 09/09/2021
Date that the sample was received by the laboratory/organization performing the testing: 09/08/2021
The quantity of what the sample constitutes: 1 bag
A brief description of the sample: 1 x 4 PCC Aggregate
From where was the sample collected: Manufacturer
Laboratory sample identification: test 1 70 cy out at 1214
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Cemex Lytle Creek

Material Information

Source Identification (SMARA, name of Pit or Job Site): 91-36-0068::REDLANDS WASH PLAN (CEMEX)
The fabricator's/manufacturer's product name for the sample:
The fabricator/manufacturer designation for the sample:
The plant number:
A detailed description of where the material sample was collected: At the plant
Where the material sample would have been placed if not sampled:
Primary Aggregate Nominal Size: 1-1/2 inch
The concrete mix design number: 1610974
Lot number:
Sublot number:
Aggregate Mix Number:
Test results on following page(s): 1

Test Results

Test 1 of 1

DIME Test ID: 2021-09-09-46-1
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Verified Date: 11/03/2021
Date Tested: 09/10/2021
Submitted By Organization: CT D08 - Barstow Field Laboratory 1
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: kaushalkumar.talati@dot.ca.gov
Organization Phone: (951) 840-8328
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
What type of gradation is being tested? Combined Gradation
Cumulative percent passing the 2 in. sieve 0 %
Cumulative percent passing the 1 1/2 in. sieve 100 %
Cumulative percent passing the 1 in. sieve 97 %
Cumulative percent passing the 3/4 in. sieve 71 %
Cumulative percent passing the 1/2 in. sieve 0 %
Cumulative percent passing the 3/8 in. sieve 25 %
Cumulative percent passing the #4 sieve 6 %
Cumulative percent passing the #8 sieve 4 %
Cumulative percent passing the #16 sieve 62 %
Cumulative percent passing the #30 sieve 41 %
Cumulative percent passing the #50 sieve 20 %
Cumulative percent passing the #100 sieve 8 %
Cumulative percent passing the #200 sieve 3 %