Print Report | Back to Sample Detail

Sample Record for 2021-10-13-46

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 215556 DEA: 081L6504 EFIS: 0820000131 QA Service Level: 1
DIST-CO-RTE-PM: 08-SBD-40,58-Var
Work Description: REPLACE AC SURFACING, RUBBERIZED HMA, SLAB REPLACEMENT & STRIPING.
Location Description: SAN BERNARDINO COUNTY AT VARIOUS LOCATIONS
Contractor Name: FEC Future Contractors & Engineers, Inc
Contractor Address: 184 Technology Dr., Ste 2, Irvine, CA 92618
Resident Engineer: Larry Canuti Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2021-10-13-46
TL Number from the TL Form:
Sample Submitted By Organization: CT D08 - Barstow Field Testing Laboratory
Sample Organization Contact: (760) 843-4173
Type of Sample: Quality Assurance
Type of Material: Concrete
Sample Taken Date: 10/13/2021
Date that the sample was received by the laboratory/organization performing the testing: 10/13/2021
The quantity of what the sample constitutes: 6
A brief description of the sample: PCC Rapid set beams
From where was the sample collected: Job Site
Laboratory sample identification: 10082021-SET NO 5
Structure unique identifier:
Structure name: RTE 58 WB LN 2 PM 12 dot 0
The fabricator/manufacturer/facility name: FEC

Material Information

The concrete mix design number: SM446BR2
The truck number from where the sample was collected: NA
The batch plant ticket number from where the sample was collected: NA
Concrete batch plant:
The fabricator/manufacturer designation for the sample:
A detailed description of where the material sample was collected: AT THE JOB SITE
Where the material sample would have been placed if not sampled:
From Lot No.:
Bag Lot No.:

Test Results

Test 1 of 4

DIME Test ID: 2021-10-13-46-1
Test Method: CTM 524-March 2013: Method of Test for Flexural Strength Of Rapid Strength Concrete
Verified Date: 11/03/2021
Date Tested: 10/13/2021
Submitted By Organization: CT D08 - Barstow Field Testing Laboratory
Organization Address: 13970 Victoria St,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: michael.yuen@dot.ca.gov
Organization Phone: (760) 843-4173
General Comments for this Test:
Test Result Compliance: does not comply
Additional Comments When Verified:
Number of specimens 3
Fracture initiates in the tension surface Within the Middle Third of the Span Length
Fracture occurred at a capped section No
Modulus of rupture 380 psi
Modulus of rupture 2 380 psi
Modulus of rupture average 390 psi
Modulus of rupture 3 400 psi

Test 2 of 4

DIME Test ID: 2021-10-13-46-2
Test Method: ASTM C293-10: Standard Test Method for Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading)
Verified Date: 11/03/2021
Date Tested: 10/23/2021
Submitted By Organization: CT D08 - Barstow Field Testing Laboratory
Organization Address: 13970 Victoria St,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: michael.yuen@dot.ca.gov
Organization Phone: (760) 843-4173
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Unit system used? US Units
Modulus of rupture 760 psi

Test 3 of 4

DIME Test ID: 2021-10-13-46-3
Test Method: ASTM C293-10: Standard Test Method for Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading)
Verified Date: 11/03/2021
Date Tested: 10/23/2021
Submitted By Organization: CT D08 - Barstow Field Testing Laboratory
Organization Address: 13970 Victoria St,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: michael.yuen@dot.ca.gov
Organization Phone: (760) 843-4173
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Unit system used? US Units
Modulus of rupture 740 psi

Test 4 of 4

DIME Test ID: 2021-10-13-46-4
Test Method: ASTM C293-10: Standard Test Method for Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading)
Verified Date: 11/03/2021
Date Tested: 10/23/2021
Submitted By Organization: CT D08 - Barstow Field Testing Laboratory
Organization Address: 13970 Victoria St,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: michael.yuen@dot.ca.gov
Organization Phone: (760) 843-4173
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Unit system used? US Units
Modulus of rupture 740 psi

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
No tests have been assigned to this sample.