Print Report | Back to Sample Detail

Sample Record for 2021-10-12-6

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 215417 DEA: 101K9304 EFIS: 1020000014 QA Service Level: 1
DIST-CO-RTE-PM: 10-SJ-VAR,580-VAR
Work Description: BRIDGE DECKS INVESTIGATION AND REHABILITATION IN AND NEAR TRACY
Location Description: SJ CTY IN & NEAR TRACY FROM GAFFERY RD TO EAST MIDWAY
Contractor Name: Meyers & Sons
Contractor Address: Unknown
Resident Engineer: Bal Bahadur Paul Structure Rep.: Ron Matin

Sample Information

DIME Sample ID: 2021-10-12-6
TL Number from the TL Form: Sacramento Caltrans lab
Sample Submitted By Organization: Kwik Bond Polymers
Sample Organization Contact: 760-518-6064
Type of Sample: Quality Control
Type of Material: Polyester
Sample Taken Date: 10/12/2021
Date that the sample was received by the laboratory/organization performing the testing: 10/12/2021
The quantity of what the sample constitutes: 2 tankers
A brief description of the sample: 1 gallon can
From where was the sample collected: Source
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Kwik Bond Polymers and Polynt

Material Information

Mfg. Lot Number(s): 1365711
Batch number: 1365711
Mix number: 1365711

Test Results

Test 1 of 6

DIME Test ID: 2021-10-12-6-1
Test Method: ASTM D2196-Feb15: Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational Viscometer
Verified Date: 10/29/2021
Date Tested: 10/29/2021
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: larry.mccrum@dot.ca.gov
Organization Phone: (916) 227-7283
General Comments for this Test: Accepted Based On Supplier Results
Test Result Compliance: complies
Additional Comments When Verified:
Viscosity 136

Test 2 of 6

DIME Test ID: 2021-10-12-6-2
Test Method: ASTM D1475-Nov13: Standard Test Method For Density of Liquid Coatings, Inks, and Related Products
Verified Date: 10/29/2021
Date Tested: 10/29/2021
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: larry.mccrum@dot.ca.gov
Organization Phone: (916) 227-7283
General Comments for this Test: Accepted Based On Supplier Results
Test Result Compliance: complies
Additional Comments When Verified:
Density Units pounds/gallons
Liquid Density (pounds per gallon) 9

Test 3 of 6

DIME Test ID: 2021-10-12-6-3
Test Method: ASTM D638-Dec14: Standard Test Method for Tensile Properties of Plastics
Verified Date: 10/29/2021
Date Tested: 10/29/2021
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: larry.mccrum@dot.ca.gov
Organization Phone: (916) 227-7283
General Comments for this Test: Accepted Based On Supplier Results
Test Result Compliance: complies
Additional Comments When Verified:
Number of specimens tested 6
Conditioning procedure 18/25/50+5/70
Speed of testing 0.45 in/min
Sample 1 Width 0.488 in
Sample 1 Ultimate strength 2850 psi
Sample 1 Thickness 0.247 in
Sample 1 Area 0.1205 in^2
Sample 1 Ultimate Strength Actual 343.43 lbs
Sample 1 percent elongation 61.97 %
Sample 1 Time 0 MM:SS
Sample 2 Width 0.488 in
Sample 2 Thickness 0.249 in
Sample 2 Area 0.1215 in^2
Sample 2 Ultimate strength 2718.6 psi
Sample 2 Ultimate Strength Actual 330.31 lbs
Sample 2 percent elongation 60.77 %
Sample 2 Time 0 MM:SS
Sample 3 Width 0.488 in
Sample 3 Thickness 0.253 in
Sample 3 Area 0.1235 in^2
Sample 3 Ultimate strength 2821 psi
Sample 3 Ultimate Strength Actual 348.39 lbs
Sample 3 percent elongation 64.36 %
Sample 3 Time 0 MM:SS
Sample 4 Width 0.489 in
Sample 4 Thickness 0.251 in
Sample 4 Area 0.1227 in^2
Sample 4 Ultimate strength 2848.1 psi
Sample 4 Ultimate Strength Actual 349.46 lbs
Sample 4 percent elongation 64.61 %
Sample 4 Time 0 MM:SS
Sample 5 Width 0.488 in
Sample 5 Thickness 0.254 in
Sample 5 Area 0.124 in^2
Sample 5 Ultimate strength 2762.1 psi
Sample 5 Ultimate Strength Actual 342.5 lbs
Sample 5 percent elongation 62.46 %
Sample 5 Time 0 MM:SS
Sample 6 Width 0.487 in
Sample 6 Thickness 0.257 in
Sample 6 Area 0.1252 in^2
Sample 6 Ultimate strength 2635.6 psi
Sample 6 Ultimate Strength Actual 329.98 lbs
Sample 6 percent elongation 58.69 %
Sample 6 Time 0 MM:SS
Ultimate Strength Average 2773 psi
Percent Elongation Average 62 %

Test 4 of 6

DIME Test ID: 2021-10-12-6-4
Test Method: ASTM D2369-Jul10: Standard Test Method for Volatile Content of Coatings
Verified Date: 10/29/2021
Date Tested: 10/29/2021
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: larry.mccrum@dot.ca.gov
Organization Phone: (916) 227-7283
General Comments for this Test: Accepted Based On Supplier Results
Test Result Compliance: complies
Additional Comments When Verified:
Mean of two volatile content determination 45.9

Test 5 of 6

DIME Test ID: 2021-10-12-6-5
Test Method: CTM 551-August 2012: Method of Test for Determining Suitability of Materials for Overlayment and Repair of Portland Cement Concrete Pavements and Structures
Verified Date: 10/29/2021
Date Tested: 10/29/2021
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: larry.mccrum@dot.ca.gov
Organization Phone: (916) 227-7283
General Comments for this Test: Accepted Based On Supplier Results
Test Result Compliance: complies
Additional Comments When Verified:
Curing history for Sample 1 24hr
Maximum applied load (P) for Sample 1 1699.81 lb
Span length for Sample 1 9 in
Break location for Sample 1 PCC
Specimen defects/notes for Sample 1 no data
Surface type for Sample 1 SSD
Modulus of rupture (R) for Sample 1 849.905 psi
Curing history for Sample 2 24hr
Maximum applied load (P) for Sample 2 2063.47 lb
Span length for Sample 2 9 in
Break location for Sample 2 PCC
Specimen defects/notes for Sample 2 no data
Surface type for Sample 2 SSD
Modulus of rupture (R) for Sample 2 1031.73 psi
Curing history for Sample 3 24hr
Maximum applied load (P) for Sample 3 1695.35 lb
Span length for Sample 3 9 in
Break location for Sample 3 PCC
Specimen defects/notes for Sample 3 no data
Surface type for Sample 3 SSD
Modulus of rupture (R) for Sample 3 847.675 psi

Test 6 of 6

DIME Test ID: 2021-10-12-6-6
Test Method: SCAQMD 309-91-Feb93: Determination of Static Volatile Emissions
Verified Date: 10/29/2021
Date Tested: 10/29/2021
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: larry.mccrum@dot.ca.gov
Organization Phone: (916) 227-7283
General Comments for this Test: Accepted Based On Supplier Results
Test Result Compliance: complies
Additional Comments When Verified:
Diameter of lid 153.9 mm
Room Temperature 75 f
Tare weight 0 grams
Initial weight 100 grams
Weight at 5 minutes 99.931 grams
Weight at 10 minutes 99.846 grams
Weight at 15 minutes 99.784 grams
Weight at 20 minutes 99.716 grams
Weight at 25 minutes 99.601 grams
Weight at 30 minutes 99.537 grams
Final weight 99.54 grams
Total weight loss 0.46 grams
Calculated radius of gallon can lid in cm 7.695 cm
Lid Factor 53.757 m^2
Volatile emission 24.728 grams/m^2

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
No tests have been assigned to this sample.