Print Report | Back to Sample Detail

Sample Record for 2014-09-03-1

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 10016 DEA: 06342524 EFIS: 0600000381 QA Service Level: 1
DIST-CO-RTE-PM: 06-FRE-180-R71.8/74.5
Work Description: NEW EXPRESS HIGHWAY
Location Description: FRESNO COUNTY ABOUT 6.3 MILES EAST OF FRESNO FROM 0.6 MILE WEST OF QUALITY AVENUE TO 0.2 MILE WEST OF SMITH AVENUE
Contractor Name: American Paving Co
Contractor Address: 315 North Thorne Avenue, Fresno, CA 93706
Resident Engineer: Mark Mengoni Structure Rep.: Mike Bloom

Sample Information

DIME Sample ID: 2014-09-03-1
TL Number from the TL Form:
Sample Submitted By Organization: Trinity Engineering Laboratories, Inc. - Fresno
Sample Organization Contact: 559-292-2188
Type of Sample: Quality Control
Type of Material: Concrete
Sample Taken Date: 09/03/2014
Date that the sample was received by the laboratory/organization performing the testing: 09/04/2014
The quantity of what the sample constitutes: 8 cylinders
A brief description of the sample: concrete cylinders
From where was the sample collected: Other
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Fowler Switch Bridge

Material Information

The concrete mix design number: ND14505
The truck number from where the sample was collected: 4786139351
The batch plant ticket number from where the sample was collected: 11148651
Concrete batch plant: 1114
The fabricator/manufacturer designation for the sample:
A detailed description of where the material sample was collected: Fowler Switch Bridge
Where the material sample would have been placed if not sampled:
From Lot No.:
Bag Lot No.:

Test Results

Test 1 of 5

DIME Test ID: 2014-09-03-1-1
Test Method: ASTM C1064-08: Standard Test Method for Temperature of Freshly Mixed Hydraulic-Cement Concrete
Submitted By Organization: Trinity Engineering Laboratories, Inc. - Fresno
Organization Address: 2437 N. Sunnyside Ave.,
Organization City: Fresno
Organization State: CA
Organization Zipcode: 93727
Organization Email:
Organization Phone: 559-292-2188
Data has not been verified.

Test 2 of 5

DIME Test ID: 2014-09-03-1-2
Test Method: ASTM C138-10b: Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
Submitted By Organization: Trinity Engineering Laboratories, Inc. - Fresno
Organization Address: 2437 N. Sunnyside Ave.,
Organization City: Fresno
Organization State: CA
Organization Zipcode: 93727
Organization Email:
Organization Phone: 559-292-2188
Data has not been verified.

Test 3 of 5

DIME Test ID: 2014-09-03-1-3
Test Method: ASTM C143-10a: Standard Test Method for Slump of Hydraulic-Cement Concrete
Submitted By Organization: Trinity Engineering Laboratories, Inc. - Fresno
Organization Address: 2437 N. Sunnyside Ave.,
Organization City: Fresno
Organization State: CA
Organization Zipcode: 93727
Organization Email:
Organization Phone: 559-292-2188
Data has not been verified.

Test 4 of 5

DIME Test ID: 2014-09-03-1-4
Test Method: ASTM C39-10: Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
Capped in accordance with ASTM C617/CTM521
Verified Date: 09/15/2014
Date Tested: 09/10/2014
Submitted By Organization: Trinity Engineering Laboratories, Inc. - Fresno
Organization Address: 2437 N. Sunnyside Ave.,
Organization City: Fresno
Organization State: CA
Organization Zipcode: 93727
Organization Email:
Organization Phone: 559-292-2188
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Unit system used? US Units
Number of specimens 2
Test performed With density determined by dimension measurements
Average cylinder density (to nearest 1 pcf) 148.5 lb/ft^3
Average diameter of cylinder 1 6.00 in
Average diameter of cylinder 2 6.00 in
Comment on any defect in either specimen or caps (Max 250 Characters) no data

Test 5 of 5

DIME Test ID: 2014-09-03-1-5
Test Method: ASTM C39-10: Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
Capped in accordance with ASTM C617/CTM521
Submitted By Organization: Trinity Engineering Laboratories, Inc. - Fresno
Organization Address: 2437 N. Sunnyside Ave.,
Organization City: Fresno
Organization State: CA
Organization Zipcode: 93727
Organization Email:
Organization Phone: 559-292-2188
Data has not been verified.

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
No tests have been assigned to this sample.