Print Report | Back to Sample Detail

Sample Record for 2021-08-25-16

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 213469 DEA: 024C40V4 EFIS: 0218000125 QA Service Level: 1
DIST-CO-RTE-PM: 02-SHA-5-R3.8/R11.7
Work Description: WIDEN TO 6 LANES, BRIDGE REPLACEMENT AND WIDENING AND ROADWAY REHAB
Location Description: SHASTA COUNTY IN AND NEAR ANDERSON FROM ROUTE 5/273 SEPARATION TO 0.4 MILE SOUTH OF CHURN CREEK ROAD OVERCROSSING
Contractor Name: J.F. SHEA CONSTRUCTION
Contractor Address: P.O. BOX 494519, REDDING, CA 96049-4519
Resident Engineer: Henry Benner Structure Rep.: Eric Chaffee

Sample Information

DIME Sample ID: 2021-08-25-16
TL Number from the TL Form: 858990
Sample Submitted By Organization: CT D02 - North Region Materials Lab
Sample Organization Contact: (530) 225-3194
Type of Sample: Acceptance
Type of Material: Reclaimed Asphalt Pavement
Sample Taken Date: 08/25/2021
Date that the sample was received by the laboratory/organization performing the testing: 08/25/2021
The quantity of what the sample constitutes: PSE 1 bag, 100k Ton Milestone
A brief description of the sample: 3/8 Inch RAP
From where was the sample collected: Manufacturer
Laboratory sample identification: D78929
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: J F Shea Construction Inc - Fawndale Rock and Asphalt - Redding CA

Material Information

RAP Source: Fawndale Rock and Asphalt, Redding, CA
Aggregate Size: 3/8 inch
Aggregate Source: Fawndale Rock and Asphalt, Redding, Ca
RAP Stockpile: Continuous
Stockpile Size (tons): Unknown

Test Results

Test 1 of 3

DIME Test ID: 2021-08-25-16-1
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Asphalt Binder Content)
Verified Date: 09/09/2021
Date Tested: 08/26/2021
Submitted By Organization: CT D02 - North Region Materials Lab
Organization Address: 1657 Riverside Dr,MS-83
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: (530) 225-3194
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Asphalt Binder Content 6.25 %
Correction Factor (Percent by mass of HMA Specimen) 0 %

Test 2 of 3

DIME Test ID: 2021-08-25-16-2
Test Method: AASHTO T30-19: Standard Method of Test for Mechanical Analysis of Extracted Aggregate (Mechanical Analysis)
Verified Date: 09/09/2021
Date Tested: 08/27/2021
Submitted By Organization: CT D02 - North Region Materials Lab
Organization Address: 1657 Riverside Dr,MS-83
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: (530) 225-3194
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Does this test use 1/4 sieve? Yes
Total mass of material in the sample 1521.5 grams
Mass retained on the 2 in. sieve 0 grams
Cumulative mass retained on the 1 1/2 in. sieve 0 grams
Cumulative mass retained on the 1 in. sieve 0 grams
Cumulative mass retained on the 3/4 in. sieve 0 grams
Cumulative mass retained on the 1/2 in. sieve 0 grams
Cumulative mass retained on the 3/8 in. sieve 11 grams
Mass retained on the 1/4 in. sieve 206.3 grams
Cumulative mass retained on the #4 sieve 418.6 grams
Cumulative mass retained on the #8 sieve 785.7 grams
Cumulative mass retained on the #16 sieve 1003.1 grams
Cumulative mass retained on the #30 sieve 1142.3 grams
Cumulative mass retained on the #50 sieve 1242.3 grams
Cumulative mass retained on the #100 sieve 1313.5 grams
Cumulative mass retained on the #200 sieve 1359.2 grams
Cumulative percent passing the 2 in. sieve 100 %
Cumulative percent passing the 1 1/2 in. sieve 100 %
Cumulative percent passing the 1 in. sieve 100 %
Cumulative percent passing the 3/4 in. sieve 100 %
Cumulative percent passing the 1/2 in. sieve 100 %
Cumulative percent passing the 3/8 in. sieve 99.3 %
Cumulative percent passing the 1/4 in. sieve 86.4 %
Cumulative percent passing the #4 sieve 72.5 %
Cumulative percent passing the #8 sieve 48.4 %
Cumulative percent passing the #16 sieve 34.1 %
Cumulative percent passing the #30 sieve 24.9 %
Cumulative percent passing the #50 sieve 18.4 %
Cumulative percent passing the #100 sieve 13.7 %
Cumulative percent passing the #200 sieve 10.67 %

Test 3 of 3

DIME Test ID: 2021-08-25-16-3
Test Method: AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 09/09/2021
Date Tested: 08/26/2021
Submitted By Organization: CT D02 - North Region Materials Lab
Organization Address: 1657 Riverside Dr,MS-83
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: (530) 225-3194
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Number of tests 1
Mass Determination Air
Method Performed Mechanical Agitation - Method A
Mass of container filled with water 7336.6 grams
Mass of oven-dry sample in air for Sample 1 1570.6 grams
Mass of container filled with the sample and water for Sample 1 8285.1 grams
Temperature of Water 75 °F
Specific Gravity for Sample 1 2.525

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
No tests have been assigned to this sample.