Print Report | Back to Sample Detail

Sample Record for 2020-09-02-41

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 214492 DEA: 033F5404 EFIS: 0313000136 QA Service Level: 1
DIST-CO-RTE-PM: 03-SAC-99,160-4.5/5.7,R44.5
Work Description: FURNISH PRECAST PRESTRESSED CONCRETE SLAB & PLACE STRUCTURAL CONCRETE.
Location Description: SACRAMENTO COUNTY NEAR GALT ON ROUTE 99 FROM NORTH OF MINGO ROAD TO SOUTH OF ARNO ROAD OVERCROSSING AND IN SACRAMENTO ON ROUTE 160 AT AMERICAN RIVER BRIDGE
Contractor Name: BROSAMER & WALL, INC.
Contractor Address: 5000 Marsh Drive, Suite 300, Conord, CA 94520
Resident Engineer: Mohssen Ghassemi Structure Rep.: Chris Quon

Sample Information

DIME Sample ID: 2020-09-02-41
TL Number from the TL Form:
Sample Submitted By Organization: Trinity Engineering Laboratories, Inc. - Fresno
Sample Organization Contact: 559-292-2188
Type of Sample: Quality Control
Type of Material: Concrete
Sample Taken Date: 09/02/2020
Date that the sample was received by the laboratory/organization performing the testing: 09/03/2020
The quantity of what the sample constitutes: 4 cylinders
A brief description of the sample: 1615759 PCC
From where was the sample collected: Job Site
Laboratory sample identification: 20-192 090220
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: CEMEX Lodi

Material Information

The concrete mix design number: 1615759
The truck number from where the sample was collected: 69092
The batch plant ticket number from where the sample was collected: 42535503
Concrete batch plant:
The fabricator/manufacturer designation for the sample:
A detailed description of where the material sample was collected: Truck
Where the material sample would have been placed if not sampled: unknown
From Lot No.:
Bag Lot No.:

Test Results

Test 1 of 4

DIME Test ID: 2020-09-02-41-1
Test Method: ASTM C143-10a: Standard Test Method for Slump of Hydraulic-Cement Concrete
Submitted By Organization: Trinity Engineering Laboratories, Inc. - Fresno
Organization Address: 2437 N. Sunnyside Ave.,
Organization City: Fresno
Organization State: CA
Organization Zipcode: 93727
Organization Email:
Organization Phone: 559-292-2188
Data has not been verified.

Test 2 of 4

DIME Test ID: 2020-09-02-41-2
Test Method: CTM 504-June 2010: Method of Test for Determining Air Content of Freshly Mixed Concrete by the Pressure Method
Submitted By Organization: Trinity Engineering Laboratories, Inc. - Fresno
Organization Address: 2437 N. Sunnyside Ave.,
Organization City: Fresno
Organization State: CA
Organization Zipcode: 93727
Organization Email:
Organization Phone: 559-292-2188
Data has not been verified.

Test 3 of 4

DIME Test ID: 2020-09-02-41-3
Test Method: CTM 557-July 2012: Method of Test for Temperature of Freshly Mixed Portland Cement Concrete
Submitted By Organization: Trinity Engineering Laboratories, Inc. - Fresno
Organization Address: 2437 N. Sunnyside Ave.,
Organization City: Fresno
Organization State: CA
Organization Zipcode: 93727
Organization Email:
Organization Phone: 559-292-2188
Data has not been verified.

Test 4 of 4

DIME Test ID: 2020-09-02-41-4
Test Method: CTM 521-June 2012: Method of Test for Compressive Strength of Molded Concrete Cylinders
Submitted By Organization: Trinity Engineering Laboratories, Inc. - Fresno
Organization Address: 2437 N. Sunnyside Ave.,
Organization City: Fresno
Organization State: CA
Organization Zipcode: 93727
Organization Email:
Organization Phone: 559-292-2188
Data has not been verified.

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
No tests have been assigned to this sample.