Print Report | Back to Sample Detail

Sample Record for 2021-07-15-49

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 44444 DEA: ASCP EFIS: ASCP QA Service Level:
DIST-CO-RTE-PM: 59---
Work Description: Special project for submitting Sample information for Asphalt Supplier Certification Program.
Location Description:
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2021-07-15-49
TL Number from the TL Form:
Sample Submitted By Organization: HollyFrontier Asphalt Company LLC
Sample Organization Contact: (623) 939-3311
Type of Sample: Quality Control
Type of Material: Asphalt Binder
Sample Taken Date: 07/15/2021
Date that the sample was received by the laboratory/organization performing the testing: 07/15/2021
The quantity of what the sample constitutes: 2 quart cans, split sample
A brief description of the sample: Asphalt Binder
From where was the sample collected: Manufacturer
Laboratory sample identification: 21-156
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: HollyFrontier-Glendale,AZ

Material Information

Performance Grade: PG 64-16
Modified: No
Lot number:
Sublot number:
Tank number: 501
Time of sample: 08:30
HMA Supplier:
Certified Asphalt Supplier: Holly Frontier Asphalt Company - Glendale AZ
Multigrade: No
Multigrade Type:
Asphalt Binder Mix Number:

Test Results

Test 1 of 7

DIME Test ID: 2021-07-15-49-1
Test Method: AASHTO T228-09r13: Standard Method of Test for Specific Gravity of Semi-Solid Asphalt Materials (Specific Gravity)
Verified Date: 08/12/2021
Date Tested: 07/15/2021
Submitted By Organization: HollyFrontier Asphalt Company LLC
Organization Address: 7110 West Northern Avenue,
Organization City: Glendale
Organization State: AZ
Organization Zipcode: 85303
Organization Email: thomas.ludlum@hollyfrontier.com
Organization Phone: (623) 939-3311
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Specific Gravity 1.017

Test 2 of 7

DIME Test ID: 2021-07-15-49-2
Test Method: AASHTO T240-17: Standard Method of Test for Effect of Heat and Air on a Moving Film of Asphalt Binder (Rolling Thin-Film Oven Test)
Verified Date: 08/12/2021
Date Tested: 07/15/2021
Submitted By Organization: HollyFrontier Asphalt Company LLC
Organization Address: 7110 West Northern Avenue,
Organization City: Glendale
Organization State: AZ
Organization Zipcode: 85303
Organization Email: thomas.ludlum@hollyfrontier.com
Organization Phone: (623) 939-3311
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Is mass change based on one or two containers? Two
Average mass change -0.024 percent

Test 3 of 7

DIME Test ID: 2021-07-15-49-3
Test Method: AASHTO T313-19: Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
Verified Date: 08/12/2021
Date Tested: 07/16/2021
Submitted By Organization: HollyFrontier Asphalt Company LLC
Organization Address: 7110 West Northern Avenue,
Organization City: Glendale
Organization State: AZ
Organization Zipcode: 85303
Organization Email: thomas.ludlum@hollyfrontier.com
Organization Phone: (623) 939-3311
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Time test started no data HH:MM:SS
Flags issued by software during test no data
Correlation coefficient (R²) 0
Regression coefficient a no data
Regression coefficient b no data
Regression coefficient c no data
Load at time 0.0 0.0 mN
Deflection at time 0.0 s 0.000 µm
Load at time 0.5 s 0.0 mN
Deflection at time 0.5 s 0.000 µm
Load at 60.0 s 0.0 mN
Beam deflection 60.0 s 0.000 µm
Measured Stiffness Modulus 60.0 s 90.200 mPa
Estimated Stiffness Modulus 60.0 s no data
Difference between stiffness moduli 60.0 s no data
Estimated m-value 60.0 s 0.360

Test 4 of 7

DIME Test ID: 2021-07-15-49-4
Test Method: AASHTO T315-20: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Verified Date: 08/12/2021
Date Tested: 07/15/2021
Submitted By Organization: HollyFrontier Asphalt Company LLC
Organization Address: 7110 West Northern Avenue,
Organization City: Glendale
Organization State: AZ
Organization Zipcode: 85303
Organization Email: thomas.ludlum@hollyfrontier.com
Organization Phone: (623) 939-3311
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Phase Original binder
Test Plate Diameter 25 mm
Phase Angle (δ) (for the 10 cycles) 88.1 degree
Dynamic Shear, G*/sin(δ) 1.13 kPa

Test 5 of 7

DIME Test ID: 2021-07-15-49-5
Test Method: AASHTO T315-20: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Verified Date: 08/12/2021
Date Tested: 07/15/2021
Submitted By Organization: HollyFrontier Asphalt Company LLC
Organization Address: 7110 West Northern Avenue,
Organization City: Glendale
Organization State: AZ
Organization Zipcode: 85303
Organization Email: thomas.ludlum@hollyfrontier.com
Organization Phone: (623) 939-3311
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Phase RTFO residue
Test Plate Diameter 25 mm
Phase Angle (δ) (for the 10 cycles) 85.5 degree
Dynamic Shear, G*/sin(δ) 2.73 kPa

Test 6 of 7

DIME Test ID: 2021-07-15-49-6
Test Method: AASHTO T315-20: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Verified Date: 08/12/2021
Date Tested: 07/16/2021
Submitted By Organization: HollyFrontier Asphalt Company LLC
Organization Address: 7110 West Northern Avenue,
Organization City: Glendale
Organization State: AZ
Organization Zipcode: 85303
Organization Email: thomas.ludlum@hollyfrontier.com
Organization Phone: (623) 939-3311
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Phase PAV residue
Test Plate Diameter 8 mm
Phase Angle (δ) (for the 10 cycles) 0.0 degree
(G*) x sin(δ)= 2978 kPa

Test 7 of 7

DIME Test ID: 2021-07-15-49-7
Test Method: AASHTO T316-17: Standard Method of Test for Viscosity Determination of Asphalt Binder Using Rotational Viscometer
Verified Date: 08/12/2021
Date Tested: 07/15/2021
Submitted By Organization: HollyFrontier Asphalt Company LLC
Organization Address: 7110 West Northern Avenue,
Organization City: Glendale
Organization State: AZ
Organization Zipcode: 85303
Organization Email: thomas.ludlum@hollyfrontier.com
Organization Phone: (623) 939-3311
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Is viscosity reading in cP/Pa-s? Pa-s
Time of test 10:56 HH:MM
Test Temperature 135 C
Speed 35 rpm
Spindle size 21 in
Torque 26 %
Viscosity reading #1 (A) 0.376 Pa-s
Viscosity reading #2 (B) 0.376 Pa-s
Viscosity reading #3 (C) 0.376 Pa-s
Average viscosity 0.376 Pa-s