Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 215424 DEA: 024G4404 EFIS: 0214000013
QA Service Level: 1
DIST-CO-RTE-PM: 02-SIS-3-38.0/38.6
Work Description: BRIDGE REPLACEMENT
Location Description: SISKIYOU COUNTY ABOUT 6 MILES NORTH OF FORT JONES FROM 0.3 MILE SOUTH TO 0.3 MILE NORTH OF LOWER MOFFETT CREEK ROAD
Contractor Name: Steelhead Constructors
Contractor Address: 2940 INNSBRUCK DRIVE, REDDING CA 96003
Resident Engineer: Nicole Mallory Structure Rep.: Andy O'Sullivan
DIME Sample ID: 2021-05-24-57
TL Number from the TL Form: 897296
Sample Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Sample Organization Contact: (530) 225-3194
Type of Sample: Verification
Type of Material: Hot Mix Asphalt
Sample Taken Date: 05/24/2021
Date that the sample was received by the laboratory/organization performing the testing: 05/24/2021
The quantity of what the sample constitutes: Verification of JMF 21-04-S01
A brief description of the sample: Treated 3/4-inch Type A HMA (eq. PG 64-16) with 24.0 RAP and virgin PG 58-22 from Valero - Benicia
From where was the sample collected: Manufacturer
Laboratory sample identification: D78806
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Tullis - Nortstate Asphalt, Redding, CA
DIME Test ID: 2021-05-24-57-1
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 08/06/2021
Date Tested: 06/03/2021
Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Organization Address: 1657 Riverside Drive,
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: 530-225-3194
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
|
What temperature unit is used?
|
Fahrenheit
|
|
Test procedure used?
|
Method A
|
|
Mass of the specimen basket assembly
|
no data
|
|
Mass of the specimen and specimen basket assembly prior to ignition
|
no data
|
|
Mass of HMA Sample prior to ignition
|
2182.6 g
|
|
Corrected Asphalt Binder Content
|
5.00 %
|
|
Mass Loss
|
no data
|
|
Mass of aggregate remaining after ignition
|
2057.5 g
|
|
Correction Factor (Percent by mass of HMA Specimen)
|
0.73 %
|
|
Moisture Content
|
0.00 %
|
|
Temperature Compensation Factor
|
no data
|
|
Test Temperature
|
1000 F
|
DIME Test ID: 2021-05-24-57-2
Test Method: AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 08/06/2021
Date Tested: 05/24/2021
Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Organization Address: 1657 Riverside Drive,
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: 530-225-3194
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Number of tests
|
1
|
|
What is the unit of measurement for theoretical density?
|
US Units
|
|
Mass Determination
|
Air
|
|
Method Performed
|
Mechanical Agitation - Method A
|
|
Mass of container filled with water
|
7336.6 grams
|
|
Mass of oven-dry sample in air for Sample 1
|
2561.7 grams
|
|
Mass of container filled with the sample and water for Sample 1
|
8874.6 grams
|
|
Temperature of Water
|
77 °F
|
|
Specific Gravity for Sample 1
|
2.502
|
|
Theoretical maximum density at 25°C (77°F)
|
no data
|
DIME Test ID: 2021-05-24-57-3
Test Method: AASHTO T312-14: Preparing and Determining the Density of Asphalt Mixture Specimens by Means of the Superpave Gyratory Compactor (Method of Compaction)
Verified Date: 08/06/2021
Date Tested: 05/25/2021
Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Organization Address: 1657 Riverside Drive,
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: 530-225-3194
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
|
Volume of the specimen (Vm8)
|
2299.657 cm^3
|
|
Volume of the specimen (Vm85)
|
2066.512 cm^3
|
|
Volume of the specimen (Vm130)
|
2040.019 cm^3
|
|
Uncorrected relative density (Gmmu8)
|
83.1 %
|
|
Uncorrected relative density (Gmmu85)
|
92.4 %
|
|
Uncorrected relative density (Gmmu130)
|
93.6 %
|
|
Relative density (Gmm8)
|
86.0 %
|
|
Relative density (Gmm85)
|
95.7 %
|
|
Relative density (Gmm130)
|
96.9 %
|
|
Air Voids (AV8)
|
14.0 %
|
|
Air Voids (AV85)
|
4.3 %
|
|
Air Voids (AV130)
|
3.1 %
|
DIME Test ID: 2021-05-24-57-4
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Verified Date: 08/06/2021
Date Tested: 08/05/2021
Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Organization Address: 1657 Riverside Drive,
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: 530-225-3194
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Bulk Specific Gravity
|
2.407
|
|
Bulk Specific Gravity 2
|
2.405
|
|
Bulk Specific Gravity 3
|
2.398
|
|
Average Bulk Specific Gravity
|
2.403
|
DIME Test ID: 2021-05-24-57-5
Test Method: AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)
Verified Date: 08/06/2021
Date Tested: 05/25/2021
Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Organization Address: 1657 Riverside Drive,
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: 530-225-3194
General Comments for this Test: VMA = 15.2%,
VFA = 74.0%,
DP = 1.1
Test Result Compliance: complies
Additional Comments When Verified:
|
Percent Air Voids
|
3.8 %
|
|
Percent Air Voids 2
|
3.9
|
|
Percent Air Voids 3
|
4.2
|
|
Percent Air Voids Average
|
4.0
|
DIME Test ID: 2021-05-24-57-6
Test Method: AASHTO T283-14: Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage (Moisture Content)
Verified Date: 08/06/2021
Date Tested: 06/03/2021
Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Organization Address: 1657 Riverside Drive,
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: 530-225-3194
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
|
Average Dry Tensile Strength
|
210 psi
|
|
Average Wet Tensile Strength
|
179 psi
|
|
Tensile Strength Ratio
|
0.85
|
DIME Test ID: 2021-05-24-57-7
Test Method: AASHTO T324-14: Standard Method of Test for Hamburg Wheel-Track Testing of Compacted Asphalt Mixtures (Hamburg Wheel Track)
Verified Date: 08/06/2021
Date Tested: 05/26/2021
Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Organization Address: 1657 Riverside Drive,
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: 530-225-3194
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
|
Specified minimum number of passes at ½” rut depth, or number of passes at ½” rut depth if applicable (Wheel A)
|
25000
|
|
Specified minimum number of passes at ½” rut depth, or number of passes at ½” rut depth if applicable (Wheel B)
|
25000
|
|
Impression at specified number of passes, or specified maximum impression if applicable (Wheel A)
|
2 mm
|
|
Impression at specified number of passes, or specified maximum impression if applicable (Wheel B)
|
2 mm
|
|
Stripping Inflection Point (Wheel A)
|
>25000
|
|
Stripping Inflection Point (Wheel B)
|
>25000
|
