Print Report | Back to Sample Detail

Sample Record for 2021-05-11-27

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 215252 DEA: 021J4704 EFIS: 0220000082 QA Service Level: 1
DIST-CO-RTE-PM: 02-TRI-3-46.7/49.8,63.8/67.704
Work Description: HMA OVERLAY, REPLACE AC SURFACING AND SHOULDER BACKING.
Location Description: TRINITY COUNTY NEAR TRINITY CENTER FROM 0.7 MILE NORTH OF CEDAR STOCK ROAD TO DIENER MINE VIADUCT AND FROM 2.3 MILES NORTH OF EL DORADO WAY TO COFFEE CREEK BRIDGE NO. 05-0060
Contractor Name: J.F. SHEA CONSTRUCTION, INC.
Contractor Address: 17400 CLEAR CREEK RD, REDDING CA 96001
Resident Engineer: Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2021-05-11-27
TL Number from the TL Form: 768792
Sample Submitted By Organization: CT D02 - North Region Materials Lab
Sample Organization Contact: (530) 225-3194
Type of Sample: Acceptance
Type of Material: Aggregate
Sample Taken Date: 05/11/2021
Date that the sample was received by the laboratory/organization performing the testing: 05/11/2021
The quantity of what the sample constitutes: Production Start-Up Evaluation
A brief description of the sample: Treated Virgin 3/4-inch Type A Aggregate
From where was the sample collected: Manufacturer
Laboratory sample identification: D78794A
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: J F Shea Construction - Fawndale Rock and Asphalt - Redding, CA

Material Information

Source Identification (SMARA or name of Pit): 91-45-0017
The fabricator's/manufacturer's product name for the sample:
The fabricator/manufacturer designation for the sample:
The plant number:
A detailed description of where the material sample was collected: Cold Feed
Where the material sample would have been placed if not sampled:
Primary Aggregate Nominal Size: 3/4 inch
The concrete mix design number: JMF 19-01-P03
Lot number:
Sublot number:

Test Results

Test 1 of 1

DIME Test ID: 2021-05-11-27-1
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Verified Date: 07/09/2021
Date Tested: 05/13/2021
Submitted By Organization: CT D02 - North Region Materials Lab
Organization Address: 1657 Riverside Dr,MS-83
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: (530) 225-3194
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
What type of gradation is being tested? HMA Gradation
Does this test use 1/4 sieve? (question for HMA Gradation Type) Yes
Total mass of material in the sample 7454.8 grams
Cumulative mass retained on the 1 1/2 in. sieve 0 grams
Cumulative mass retained on the 1 in. sieve 0 grams
Cumulative mass retained on the 3/4 in. sieve 58 grams
Cumulative mass retained on the 1/2 in. sieve 1566 grams
Cumulative mass retained on the 3/8 in. sieve 2784 grams
Mass retained on the 1/4 in. sieve 3782 grams
Cumulative mass retained on the #4 sieve 4289 grams
Total sample mass passing the #4 sieve 3165.8 grams
Total mass of fine material in the sample 487.9 grams
Cumulative mass retained on the #8 sieve 212.6 grams
Cumulative mass retained on the #16 sieve 335.6 grams
Cumulative mass retained on the #30 sieve 394.3 grams
Cumulative mass retained on the #50 sieve 423.4 grams
Cumulative mass retained on the #100 sieve 439.7 grams
Cumulative mass retained on the #200 sieve 450 grams
Cumulative percent passing the 1 1/2 in. sieve 100 %
Cumulative percent passing the 1 in. sieve 100 %
Cumulative percent passing the 3/4 in. sieve 99.2 %
Cumulative percent passing the 1/2 in. sieve 79 %
Cumulative percent passing the 3/8 in. sieve 62.7 %
Cumulative percent passing the 1/4 in. sieve 49.3 %
Cumulative percent passing the #4 sieve 42.5 %
Cumulative percent passing the #8 sieve 24 %
Cumulative percent passing the #16 sieve 13.3 %
Cumulative percent passing the #30 sieve 8.2 %
Cumulative percent passing the #50 sieve 5.6 %
Cumulative percent passing the #100 sieve 4.2 %
Cumulative percent passing the #200 sieve 3.3 %

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
No tests have been assigned to this sample.