Print Report | Back to Sample Detail

Sample Record for 2021-06-14-32

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 215250 DEA: 021J4404 EFIS: 0220000079 QA Service Level: 1
DIST-CO-RTE-PM: 02-MOD-299-20.0/23.1,23.5/24.5,33.5/37.5
Work Description: ASPHALT RUBBER CHIP SEAL.
Location Description: MODOC COUNTY AT VARIOUS LOCATIONS FROM 1.8 MILES WEST OF ROUTE 139 TO 0.3 MILE WEST OF RATTLESNAKE CREEK BRIDGE
Contractor Name: AMERICAN PAVEMENT SYSTEMS , Inc.
Contractor Address: 1012 11th Street, Modesto, CA 95354
Resident Engineer: Tofael Anwar Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2021-06-14-32
TL Number from the TL Form: 853348
Sample Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Sample Organization Contact: (530) 225-3194
Type of Sample: Acceptance
Type of Material: Aggregate
Sample Taken Date: 06/14/2021
Date that the sample was received by the laboratory/organization performing the testing: 06/15/2021
The quantity of what the sample constitutes: Production Start-Up Evaluation
A brief description of the sample: Lime Treated Dust Sized Aggregate
From where was the sample collected: Manufacturer
Laboratory sample identification: D78844C
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Eagle Peak Rock and Paving – Alturas Plant (Alturas, CA)

Material Information

Source Identification (SMARA, name of Pit or Job Site): 91-25-0029
The fabricator's/manufacturer's product name for the sample: Unknown
The fabricator/manufacturer designation for the sample: Unknown
The plant number: Unknown
A detailed description of where the material sample was collected: Hot Bin
Where the material sample would have been placed if not sampled: Digouts
Primary Aggregate Nominal Size: fine
The concrete mix design number:
Lot number: Unknown
Sublot number: Unknown
Aggregate Mix Number:

Test Results

Test 1 of 1

DIME Test ID: 2021-06-14-32-1
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Verified Date: 12/30/2021
Date Tested: 06/15/2021
Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Organization Address: 1657 Riverside Drive,
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: 530-225-3194
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
What type of gradation is being tested? HMA Gradation
Cumulative percent passing the 1 1/2 in. sieve 100 %
Cumulative percent passing the 1 in. sieve 100 %
Cumulative percent passing the 3/4 in. sieve 100 %
Cumulative percent passing the 1/2 in. sieve 100 %
Cumulative percent passing the 3/8 in. sieve 100 %
Cumulative percent passing the 1/4 in. sieve 100 %
Cumulative percent passing the #4 sieve 98 %
Cumulative percent passing the #8 sieve 67.5 %
Cumulative percent passing the #16 sieve 41.8 %
Cumulative percent passing the #30 sieve 26.2 %
Cumulative percent passing the #50 sieve 18.1 %
Cumulative percent passing the #100 sieve 13.6 %
Cumulative percent passing the #200 sieve 10.61 %