Print Report | Back to Sample Detail

Sample Record for 2021-05-25-28

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 215390 DEA: 061A9604 EFIS: 0620000138 QA Service Level: 1
DIST-CO-RTE-PM: 06-TUL-99-41.3/52.0
Work Description: COLD PLANE PAVEMENT AND PLACE RHMA (OGFC).
Location Description: TULARE COUNTY NEAR GOSHEN FROM 0.2 MILE NORTH OF GOSHEN OVERHEAD TO 0.2 MILE NORTH OF DODGE AVENUE OVERCROSSING
Contractor Name: Cal Valley Construction
Contractor Address: 5125 N. Gates Ave., Ste. 102, Fresno, CA, 93722-6414
Resident Engineer: Jake Garcia Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2021-05-25-28
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - Sacramento Hot Mix Asphalt Laboratory
Sample Organization Contact: (916) 227-7302
Type of Sample: Dispute Resolution
Type of Material: Hot Mix Asphalt
Sample Taken Date: 05/25/2021
Date that the sample was received by the laboratory/organization performing the testing: 06/15/2021
The quantity of what the sample constitutes: 4 boxes
A brief description of the sample: 1/2" RHMA-O
From where was the sample collected: Manufacturer
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Porterville Asphalt

Material Information

HMA Type: OGFC
HMA Grading: 1/2 inch
Lot number: 1
Sublot number: 4
HMA Mix Number:

Test Results

Test 1 of 1

DIME Test ID: 2021-05-25-28-1
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 06/17/2021
Date Tested: 06/17/2021
Submitted By Organization: CT HQ - Sacramento Hot Mix Asphalt Laboratory
Organization Address: 5900 Folsom Boulevard, Room 225,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (916) 227-7302
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
What temperature unit is used? Fahrenheit
Test procedure used? no data
Mass of HMA Sample prior to ignition no data
Corrected Asphalt Binder Content 6.55 %
Mass Loss no data
Correction Factor (Percent by mass of HMA Specimen) no data
Moisture Content no data
Temperature Compensation Factor no data
Test Temperature no data