Print Report | Back to Sample Detail

Sample Record for 2021-04-19-37

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 212496 DEA: 024E4504 EFIS: 0200020286 QA Service Level: 1
DIST-CO-RTE-PM: 02-LAS,MOD-139,299-VAR
Work Description: PLACE HMA, REPLACE DRAINAGE, CULVERT, ELECTRICAL AND LIGHTING SYSTEMS.
Location Description: LASSEN AND MODOC COUNTIES ON ROUTE 139 AT 0.1 MILE NORTH OF LASSEN COUNTY LINE AND ON ROUTE 299 AT VARIOUS LOCATONS FROM 0.4 MILE WEST OF BOYD HILL LOOKOUT ROAD TO 0.6 MILE EAST OF COUNTY ROAD 87
Contractor Name: PAR ELECTRICAL CONTRACTORS INC
Contractor Address: 1465 WEST FOURTH STREET, RENO, NV 89503
Resident Engineer: Mike Zdenek Structure Rep.: Chris Brace

Sample Information

DIME Sample ID: 2021-04-19-37
TL Number from the TL Form: 037265
Sample Submitted By Organization: CT D02 - North Region Materials Lab
Sample Organization Contact: (530) 225-3194
Type of Sample: Verification
Type of Material: Aggregate
Sample Taken Date: 04/19/2021
Date that the sample was received by the laboratory/organization performing the testing: 04/20/2021
The quantity of what the sample constitutes: JMF Verification
A brief description of the sample: 3/4-inch Type A Treated Virgin Aggregate
From where was the sample collected: Manufacturer
Laboratory sample identification: D78781A
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Hat Creek Construction and Materials - Shaw Pit Facility - Lookout, CA

Material Information

Source Identification (SMARA or name of Pit): 91-25-0008
The fabricator's/manufacturer's product name for the sample:
The fabricator/manufacturer designation for the sample:
The plant number:
A detailed description of where the material sample was collected: Cold Feed
Where the material sample would have been placed if not sampled:
Primary Aggregate Nominal Size: 3/4 inch
The concrete mix design number: JMF21-03-S02
Lot number:
Sublot number:

Test Results

Test 1 of 1

DIME Test ID: 2021-04-19-37-1
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Verified Date: 06/15/2021
Date Tested: 04/23/2021
Submitted By Organization: CT D02 - North Region Materials Lab
Organization Address: 1657 Riverside Dr,MS-83
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: (530) 225-3194
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
What type of gradation is being tested? HMA Gradation
Does this test use 1/4 sieve? (question for HMA Gradation Type) Yes
Total mass of material in the sample 5351.6 grams
Cumulative mass retained on the 1 1/2 in. sieve 0 grams
Cumulative mass retained on the 1 in. sieve 0 grams
Cumulative mass retained on the 3/4 in. sieve 69 grams
Cumulative mass retained on the 1/2 in. sieve 1459 grams
Cumulative mass retained on the 3/8 in. sieve 2166 grams
Mass retained on the 1/4 in. sieve 3058 grams
Cumulative mass retained on the #4 sieve 3541 grams
Total sample mass passing the #4 sieve 1810.6 grams
Total mass of fine material in the sample 500.4 grams
Cumulative mass retained on the #8 sieve 214.9 grams
Cumulative mass retained on the #16 sieve 326 grams
Cumulative mass retained on the #30 sieve 387.1 grams
Cumulative mass retained on the #50 sieve 421.2 grams
Cumulative mass retained on the #100 sieve 439.1 grams
Cumulative mass retained on the #200 sieve 449.3 grams
Cumulative percent passing the 1 1/2 in. sieve 100 %
Cumulative percent passing the 1 in. sieve 100 %
Cumulative percent passing the 3/4 in. sieve 98.7 %
Cumulative percent passing the 1/2 in. sieve 72.7 %
Cumulative percent passing the 3/8 in. sieve 59.5 %
Cumulative percent passing the 1/4 in. sieve 42.9 %
Cumulative percent passing the #4 sieve 33.8 %
Cumulative percent passing the #8 sieve 19.3 %
Cumulative percent passing the #16 sieve 11.8 %
Cumulative percent passing the #30 sieve 7.7 %
Cumulative percent passing the #50 sieve 5.3 %
Cumulative percent passing the #100 sieve 4.1 %
Cumulative percent passing the #200 sieve 3.45 %

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
No tests have been assigned to this sample.