Print Report | Back to Sample Detail

Sample Record for 2021-04-12-57

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 212501 DEA: 022E4804 EFIS: 0200000586 QA Service Level: 1
DIST-CO-RTE-PM: 02-SIS-96,263-103.1/103.6,56.8/57.2
Work Description: BRIDGE REPLACEMENT
Location Description: SISKIYOU COUNTY ABOUT 8 MILES NORTH OF YREKA ON ROUTE 96 FROM 0.5 MILE WEST TO 0.2 MILE EAST OF ROUTE 263 AND ON ROUTE 263 FROM 0.3 MILE NORTH OF SHASTA RIVER BRIDGE #02-0014 TO ROUTE 96
Contractor Name: Golden State Bridge
Contractor Address: 3701 Mallard Drive, Benicia, CA 94510
Resident Engineer: Nicole Mallory Structure Rep.: Andy O'Sullevan

Sample Information

DIME Sample ID: 2021-04-12-57
TL Number from the TL Form: 897284
Sample Submitted By Organization: CT D02 - North Region Materials Lab
Sample Organization Contact: (530) 225-3194
Type of Sample: Acceptance
Type of Material: Aggregate
Sample Taken Date: 04/12/2021
Date that the sample was received by the laboratory/organization performing the testing: 04/12/2021
The quantity of what the sample constitutes: Production Start-Up Evaluation
A brief description of the sample: Lime Treated, Virgin 3/4-inch Type A Aggregate (Cold Feed)
From where was the sample collected: Manufacturer
Laboratory sample identification: D78772A
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: JF Shea Construction, Fawndale Rock and Asphalt, Redding, CA

Material Information

Source Identification (SMARA or name of Pit): 91-45-0017
The fabricator's/manufacturer's product name for the sample:
The fabricator/manufacturer designation for the sample:
The plant number:
A detailed description of where the material sample was collected: Cold Feed Sampling Device at Plant
Where the material sample would have been placed if not sampled:
Primary Aggregate Nominal Size: 3/4 inch
The concrete mix design number: JMF 18-03-P02m
Lot number:
Sublot number:

Test Results

Test 1 of 1

DIME Test ID: 2021-04-12-57-1
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Verified Date: 05/21/2021
Date Tested: 04/13/2021
Submitted By Organization: CT D02 - North Region Materials Lab
Organization Address: 1657 Riverside Dr,MS-83
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: (530) 225-3194
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
What type of gradation is being tested? HMA Gradation
Does this test use 1/4 sieve? (question for HMA Gradation Type) Yes
Total mass of material in the sample 5975.1 grams
Cumulative mass retained on the 1 1/2 in. sieve 0 grams
Cumulative mass retained on the 1 in. sieve 0 grams
Cumulative mass retained on the 3/4 in. sieve 157 grams
Cumulative mass retained on the 1/2 in. sieve 1537 grams
Cumulative mass retained on the 3/8 in. sieve 2159 grams
Mass retained on the 1/4 in. sieve 2872 grams
Cumulative mass retained on the #4 sieve 3240 grams
Total sample mass passing the #4 sieve 2735.1 grams
Total mass of fine material in the sample 518 grams
Cumulative mass retained on the #8 sieve 189 grams
Cumulative mass retained on the #16 sieve 314.7 grams
Cumulative mass retained on the #30 sieve 381.5 grams
Cumulative mass retained on the #50 sieve 417.3 grams
Cumulative mass retained on the #100 sieve 440.2 grams
Cumulative mass retained on the #200 sieve 453.8 grams
Cumulative percent passing the 1 1/2 in. sieve 100 %
Cumulative percent passing the 1 in. sieve 100 %
Cumulative percent passing the 3/4 in. sieve 97.4 %
Cumulative percent passing the 1/2 in. sieve 74.3 %
Cumulative percent passing the 3/8 in. sieve 63.9 %
Cumulative percent passing the 1/4 in. sieve 51.9 %
Cumulative percent passing the #4 sieve 45.8 %
Cumulative percent passing the #8 sieve 29.1 %
Cumulative percent passing the #16 sieve 18 %
Cumulative percent passing the #30 sieve 12.1 %
Cumulative percent passing the #50 sieve 8.9 %
Cumulative percent passing the #100 sieve 6.9 %
Cumulative percent passing the #200 sieve 5.68 %

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
No tests have been assigned to this sample.