Print Report | Back to Sample Detail

Sample Record for 2021-02-09-42

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 215014 DEA: 101C9404 EFIS: 1016000020 QA Service Level: 1
DIST-CO-RTE-PM: 10-SJ-5-26.4/27.0
Work Description: BRIDGE REHABILITATION
Location Description: ON STATE HIGHWAY IN SAN JOAQUIN COUNTY IN STOCKTON FROM 0.3 MILE NORTH OF ROUTE 5/4 SEPARATION TO PERSHING AVENUE
Contractor Name: GOLDEN STATE BRIDGE, INC.
Contractor Address: 3701 Mallard Drive, Benicia, CA 94510
Resident Engineer: Chris Hanson Structure Rep.: Ron Matin

Sample Information

DIME Sample ID: 2021-02-09-42
TL Number from the TL Form: 0001
Sample Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Sample Organization Contact: (916) 227-7283
Type of Sample: Quality Assurance
Type of Material: Rapid Set
Sample Taken Date: 02/09/2021
Date that the sample was received by the laboratory/organization performing the testing: 02/09/2021
The quantity of what the sample constitutes: 2 Bags
A brief description of the sample: Rapid Setting Concrete
From where was the sample collected: Manufacturer
Laboratory sample identification:
Structure unique identifier:
Structure name: Entire Bridge Deck/Ramp
The fabricator/manufacturer/facility name: CTS Cement

Material Information

Manufacturer: CTS Cement
Mix no.: 3494
Materials Received: Rapid Set DOT Repair Mix
Lot no.: 61106300
Batch no.: 0000000000

Test Results

Test 1 of 1

DIME Test ID: 2021-02-09-42-1
Test Method: CONCLP 2-16: Rapid Set Patching Materials
Verified Date: 05/19/2021
Date Tested: 02/25/2021
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: larry.mccrum@dot.ca.gov
Organization Phone: (916) 227-7283
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Compressive Strength @ 3 hrs (CTM 551) 5877
Compressive Strength @ 24 hrs (CTM 551) 6977
Flexure Strength @ 24 hrs (CTM 551) 1655
Bond Strength @ 24 hrs - SSD (CTM 551) 470
Bond Strength @ 24 hrs - Dry (CTM 551) 620
Water Absorption (CTM 551) 7.5
Abrasion @ 24 hrs (CTM 550) 9.3
Drying Shrinkage @ 4 days (CTM 596) 0.02
Soluble Chlorides (CTM 422) 0.006
Water Soluble-Sulfates (CTM 417) 0.17
Material Weight 55
Water Weight 9

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
No tests have been assigned to this sample.