Print Report | Back to Sample Detail

Sample Record for 2021-02-05-28

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 215211 DEA: 051K6904 EFIS: 0518000230 QA Service Level: 1
DIST-CO-RTE-PM: 05--,101,154-
Work Description:
Location Description:
Contractor Name: Myers & Sons Construction
Contractor Address: 4600 Northgate Boulevard, Suite 100, Sacramento, CA 95834-1121
Resident Engineer: David Ballentine Structure Rep.: Lewis, David

Sample Information

DIME Sample ID: 2021-02-05-28
TL Number from the TL Form: Sacramento Caltrans lab
Sample Submitted By Organization: Kwik Bond Polymers
Sample Organization Contact: 760-518-6064
Type of Sample: Quality Control
Type of Material: Methacrylate
Sample Taken Date: 02/05/2021
Date that the sample was received by the laboratory/organization performing the testing: 02/05/2021
The quantity of what the sample constitutes: 25000 gallons
A brief description of the sample: 1 Quart bottle
From where was the sample collected: Manufacturer
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Kwik Bond Polymers, Benicia

Material Information

Mfg. Lot Number(s): 2140690789
Batch number: 2140690789
Mix number: 2140690789

Test Results

Test 1 of 1

DIME Test ID: 2021-02-05-28-1
Test Method: CONCLP 4-16: HMWM
Verified Date: 05/28/2021
Date Tested: 05/28/2021
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: larry.mccrum@dot.ca.gov
Organization Phone: (916) 227-7283
General Comments for this Test: Accepted SSD Bond Strength and Tack Free Time based on Vendors Results.
Additional Comments When Verified:
Viscosity (ASTM D 2196) Brookfield RVT with UL adapter, 50 RPM @ 77 deg F, 25 max cps @ 77 deg F 19.6
Specific gravity (ASTM D 1475) 0.90 min @ 77 deg F 1.09
Volatile content (ASTM D 2369) 30% max 23.2
Flash point (ASTM D 3828) more than 180 deg F 205
PCC - SSD bond strength (CA Test 551) 500 psi minimum @ 24 hours 888
Task free time, 400 minutes max 260

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
No tests have been assigned to this sample.