Print Report | Back to Sample Detail

Sample Record for 2021-04-27-9

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 214858 DEA: 11424904 EFIS: 1116000094 QA Service Level: 1
DIST-CO-RTE-PM: 11-SD-5,8,15,52,54-Var
Work Description: Install roadside signs.
Location Description: 11-SD-5, 8, 15, 52, 54, etc.-Var.
Contractor Name: BC Rentals Inc, dba BC Traffic Specialist
Contractor Address: 638 W Southern Ave,, Orange, CA 92865
Resident Engineer: Genaro Genel Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2021-04-27-9
TL Number from the TL Form: na
Sample Submitted By Organization: CT QASI - Bay Area Field Laboratory
Sample Organization Contact: (707) 649-5453
Type of Sample: Quality Assurance
Type of Material: SMTL TM3 - Fastener Assembly
Sample Taken Date: 04/27/2021
Date that the sample was received by the laboratory/organization performing the testing: 04/27/2021
The quantity of what the sample constitutes: 703
A brief description of the sample: F1554-55 Anchor Bolt
From where was the sample collected: Fabricator
Laboratory sample identification: na
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Universal Industrial Sales Inc

Material Information

Rocap Number(s): na
Heat Number(s): 1201025418
Nut Mfg. Lot Number(s): na
Washer Mfg. Lot Number(s): na
Bolt Specification: F1554-55 S1
Bolt Length(s): 5'-0"
Nut Specification: na
Washer Specification: na
Finish: HDG/Plain
Diameter/Size: 2-1/2"
Bolt Mfg. Lot Number: na
Rocap Test Requirement(s): na
Lubricant Requirements(s): Plain

Test Results

Test 1 of 12

DIME Test ID: 2021-04-27-9-1
Test Method: ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)
Verified Date: 05/06/2021
Date Tested: 05/06/2021
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Number of Samples 1
SampleHeat NumberDiameter (in)Area (sqin)Stress at Offset (psi)Tensile Strength (psi)Elongation in 4 x d (%)Tested By
112010254180.4990.196581198489427.7bewing
UTM 67kip
Temperature 72 f

Test 2 of 12

DIME Test ID: 2021-04-27-9-2
Test Method: ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)
Verified Date: 05/06/2021
Date Tested: 05/06/2021
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Number of Samples 1
SampleHeat NumberDiameter (in)Area (sqin)Stress at Offset (psi)Tensile Strength (psi)Elongation in 4 x d (%)Tested By
212010254180.50.196577608450528.2bewing
UTM 67kip
Temperature 72 f

Test 3 of 12

DIME Test ID: 2021-04-27-9-3
Test Method: ASME B1.2-83r01: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)
Verified Date: 05/06/2021
Date Tested: 05/06/2021
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) 1201025418
Mfg. Lot Number no data
Finish Coating Plain and A153 and F2329
Product Markings YELLOW PAINT
Size 2.5 in
Bolt Length 60 in
Pitch Diameter 2.326 in
Pitch Diameter 2nd 2.357 in

Test 4 of 12

DIME Test ID: 2021-04-27-9-4
Test Method: ASME B1.2-83r01: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)
Verified Date: 05/06/2021
Date Tested: 05/06/2021
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1B
Rocap Number no data
Heat Number(s) 1201025418
Mfg. Lot Number no data
Finish Coating Plain and A153 and F2329
Product Markings YELLOW PAINT
Size 2.5 in
Bolt Length 60 in
Pitch Diameter 2.329 in
Pitch Diameter 2nd 2.359 in

Test 5 of 12

DIME Test ID: 2021-04-27-9-5
Test Method: ASME B1.2-83r01: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)
Verified Date: 05/06/2021
Date Tested: 05/06/2021
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1C
Rocap Number no data
Heat Number(s) 1201025418
Mfg. Lot Number no data
Finish Coating Plain and A153 and F2329
Product Markings YELLOW PAINT
Size 2.5 in
Bolt Length 60 in
Pitch Diameter 2.327 in
Pitch Diameter 2nd 2.334 in

Test 6 of 12

DIME Test ID: 2021-04-27-9-6
Test Method: ASME B1.2-83r01: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)
Verified Date: 05/06/2021
Date Tested: 05/06/2021
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1D
Rocap Number no data
Heat Number(s) 1201025418
Mfg. Lot Number no data
Finish Coating Plain and A153 and F2329
Product Markings YELLOW PAINT
Size 2.5 in
Bolt Length 60 in
Pitch Diameter 2.329 in
Pitch Diameter 2nd 2.355 in

Test 7 of 12

DIME Test ID: 2021-04-27-9-7
Test Method: ASME B1.2-83r01: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)
Verified Date: 05/06/2021
Date Tested: 05/06/2021
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1E
Rocap Number no data
Heat Number(s) 1201025418
Mfg. Lot Number no data
Finish Coating Plain and A153 and F2329
Product Markings YELLOW PAINT
Size 2.5 in
Bolt Length 60 in
Pitch Diameter 2.326 in
Pitch Diameter 2nd 2.356 in

Test 8 of 12

DIME Test ID: 2021-04-27-9-8
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 05/06/2021
Date Tested: 05/06/2021
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) 1201025418
Mfg. Lot Number no data
Finish Coating Plain and A153 and F2329
Product Markings YELLOW PAINT
Size 2.5 in
Bolt Length 60 in
Measurement Average 8.29 mils

Test 9 of 12

DIME Test ID: 2021-04-27-9-9
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 05/06/2021
Date Tested: 05/06/2021
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1B
Rocap Number no data
Heat Number(s) 1201025418
Mfg. Lot Number no data
Finish Coating Plain and A153 and F2329
Product Markings YELLOW PAINT
Size 2.5 in
Bolt Length 60 in
Measurement Average 8.7 mils

Test 10 of 12

DIME Test ID: 2021-04-27-9-10
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 05/06/2021
Date Tested: 05/06/2021
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1C
Rocap Number no data
Heat Number(s) 1201025418
Mfg. Lot Number no data
Finish Coating Plain and A153 and F2329
Product Markings YELLOW PAINT
Size 2.5 in
Bolt Length 60 in
Measurement Average 8.97 mils

Test 11 of 12

DIME Test ID: 2021-04-27-9-11
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 05/06/2021
Date Tested: 05/06/2021
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1D
Rocap Number no data
Heat Number(s) 1201025418
Mfg. Lot Number no data
Finish Coating Plain and A153 and F2329
Product Markings YELLOW PAINT
Size 2.5 in
Bolt Length 60 in
Measurement Average 9 mils

Test 12 of 12

DIME Test ID: 2021-04-27-9-12
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 05/06/2021
Date Tested: 05/06/2021
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1E
Rocap Number no data
Heat Number(s) 1201025418
Mfg. Lot Number no data
Finish Coating Plain and A153 and F2329
Product Markings YELLOW PAINT
Size 2.5 in
Bolt Length 60 in
Measurement Average 7.92 mils

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
No tests have been assigned to this sample.