*Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Sample Record for 2014-05-05-10003294


Project Information

Project ID: 7780 DEA: 112T1824 EFIS: 1100020051 QA Service Level: 1
DIST-CO-RTE-PM: 11-SD-805-4.7/5.6
Work Description: REPLACE STRUCTURE AND CONSTRUCT DIRECT ACCESS RAMP (DAR).
Location Description: SAN DIEGO COUNTY IN CHULA VISTA FROM 0.4 MILE SOUTH OF EAST PALOMAR STREET OVERCROSSING TO 0.1 MILE NORTH OF NAPLES STREET UNDERCROSSING
Contractor Name: GRANITE CONSTRUCTION COMPANY Contractor Address: 5860 El Camino Real #200
Resident Engineer: Tom Davis Structure Rep.: Ma, Anh

Sample Information

DIME Sample ID: 2014-05-05-10003294
TL Number from the TL Form:
Sample Submitted By Organization: RMA Group - Rancho Cucamonga
Sample Organization Contact: 909-989-1751
Type of Sample: Quality Control
Type of Material: Concrete
Sample Taken Date: 05/05/2014
Date that the sample was received by the laboratory/organization performing the testing:
The quantity of what the sample constitutes: 5 cylinders
A brief description of the sample: 6x12 concrete cylinders
From where was the sample collected: Source
Laboratory sample identification: 2014-05-05-1000
Structure unique identifier: 2014-05-05-1000
Structure name:

Material Information

The concrete mix design number: 103612F
The truck number from where the sample was collected: 338
The batch plant ticket number from where the sample was collected: 112493
Concrete batch plant:
The fabricator/manufacturer designation for the sample:
A detailed description of where the material sample was collected: RW 301L Stations 10 plus 50 to 10 plus 98
Where the material sample would have been placed if not sampled:
From Lot No.:
Bag Lot No.:

Test Results

Test 1 of 8

DIME Test ID: 2014-05-05-10003294-1
Test Method: ASTM C143-10a: Standard Test Method for Slump of Hydraulic-Cement Concrete
Verified Date: 05/20/2014
Date Tested: 05/05/2014
Submitted By Organization: RMA Group - Rancho Cucamonga
Organization Address: 12130 Santa Margarita Court
Test General Comments:
Additional Comments When Verified:
Slump 4 inch

Test Results

Test 2 of 8

DIME Test ID: 2014-05-05-10003294-2
Test Method: ASTM C138-10b: Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
Verified Date: 05/20/2014
Date Tested: 05/05/2014
Submitted By Organization: RMA Group - Rancho Cucamonga
Organization Address: 12130 Santa Margarita Court
Test General Comments:
Additional Comments When Verified:
Identification of concrete represented by the sample Set B
Volume of the measure 0.25 ft^3
Density of concrete 147 lb/ft^3
Yield of concrete no data
Relative yield of the batch no data
Cement content no data
Air content no data

Test Results

Test 3 of 8

DIME Test ID: 2014-05-05-10003294-3
Test Method: ASTM C1064-08: Standard Test Method for Temperature of Freshly Mixed Hydraulic-Cement Concrete
Verified Date: 05/20/2014
Date Tested: 05/05/2014
Submitted By Organization: RMA Group - Rancho Cucamonga
Organization Address: 12130 Santa Margarita Court
Test General Comments:
Additional Comments When Verified:
Temperature 78 F

Test Results

Test 4 of 8

DIME Test ID: 2014-05-05-10003294-4
Test Method: ASTM C231-10: Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
Verified Date: 05/20/2014
Date Tested: 05/05/2014
Submitted By Organization: RMA Group - Rancho Cucamonga
Organization Address: 12130 Santa Margarita Court
Test General Comments:
Additional Comments When Verified:
Air content 1.6 %
Air content of the mortar fraction no data

Test Results

Test 5 of 8

DIME Test ID: 2014-05-05-10003294-5
Test Method: ASTM C39-10: Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
Capped in accordance with ASTM C617/CTM521
Data has not been verified.

Test Results

Test 6 of 8

DIME Test ID: 2014-05-05-10003294-6
Test Method: ASTM C39-10: Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
Capped in accordance with ASTM C617/CTM521
Data has not been verified.

Test Results

Test 7 of 8

DIME Test ID: 2014-05-05-10003294-7
Test Method: ASTM C39-10: Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
Capped in accordance with ASTM C617/CTM521
Data has not been verified.

Test Results

Test 8 of 8

DIME Test ID: 2014-05-05-10003294-8
Test Method: ASTM C39-10: Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
Capped in accordance with ASTM C617/CTM521
Data has not been verified.