Print Report | Back to Sample Detail

Sample Record for 2021-02-09-40

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 213903 DEA: 043G4544 EFIS: 0412000054 QA Service Level: 1
DIST-CO-RTE-PM: 04-ALA,SM-92-R14.4/R18.8,R0.0/R.2.4
Work Description: Repair Spalled Concrete Columns and Spandrel Beams
Location Description: San Mateo-Hayward Bridge
Contractor Name: Golden State Bridge, Inc
Contractor Address: 3701 Mallard Dr., Benicia, CA 94510
Resident Engineer: Kingston Atako Structure Rep.: Lisa Chang-Bridges

Sample Information

DIME Sample ID: 2021-02-09-40
TL Number from the TL Form: C902227
Sample Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Sample Organization Contact: (916) 227-7283
Type of Sample: Quality Assurance
Type of Material: Rapid Set
Sample Taken Date: 02/09/2021
Date that the sample was received by the laboratory/organization performing the testing: 02/10/2021
The quantity of what the sample constitutes: 2 Bags
A brief description of the sample: Rapid Setting Concrete
From where was the sample collected: Manufacturer
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: GST International

Material Information

Manufacturer: GST International
Mix no.: 3497
Materials Received: Elephant Armor
Lot no.: 011421
Batch no.: 000000

Test Results

Test 1 of 1

DIME Test ID: 2021-02-09-40-1
Test Method: CONCLP 2-16: Rapid Set Patching Materials
Verified Date: 04/20/2021
Date Tested: 04/20/2021
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: larry.mccrum@dot.ca.gov
Organization Phone: (916) 227-7283
General Comments for this Test:
Test Result Compliance: does not comply
Additional Comments When Verified:
Compressive Strength @ 3 hrs (CTM 551) 5393
Compressive Strength @ 24 hrs (CTM 551) 6433
Flexure Strength @ 24 hrs (CTM 551) 3518
Bond Strength @ 24 hrs - SSD (CTM 551) 345
Bond Strength @ 24 hrs - Dry (CTM 551) 340
Water Absorption (CTM 551) 13.7
Abrasion @ 24 hrs (CTM 550) 16
Drying Shrinkage @ 4 days (CTM 596) 0.02
Soluble Chlorides (CTM 422) 0.01
Water Soluble-Sulfates (CTM 417) 0.16
Material Weight 50
Water Weight 12.94

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
No tests have been assigned to this sample.