Print Report | Back to Sample Detail

Sample Record for 2021-03-05-21

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 214492 DEA: 033F5404 EFIS: 0313000136 QA Service Level: 1
DIST-CO-RTE-PM: 03-SAC-99,160-4.5/5.7,R44.5
Work Description: FURNISH PRECAST PRESTRESSED CONCRETE SLAB & PLACE STRUCTURAL CONCRETE.
Location Description: SACRAMENTO COUNTY NEAR GALT ON ROUTE 99 FROM NORTH OF MINGO ROAD TO SOUTH OF ARNO ROAD OVERCROSSING AND IN SACRAMENTO ON ROUTE 160 AT AMERICAN RIVER BRIDGE
Contractor Name: BROSAMER & WALL, INC.
Contractor Address: 5000 Marsh Drive, Suite 300, Conord, CA 94520
Resident Engineer: Mohssen Ghassemi Structure Rep.: Chris Quon

Sample Information

DIME Sample ID: 2021-03-05-21
TL Number from the TL Form: C 849135
Sample Submitted By Organization: CT D03 - North Region Materials Lab
Sample Organization Contact: (530) 741-4238
Type of Sample: Verification
Type of Material: Hot Mix Asphalt
Sample Taken Date: 03/05/2021
Date that the sample was received by the laboratory/organization performing the testing: 03/08/2021
The quantity of what the sample constitutes: JMF Verification
A brief description of the sample: 3/4" RHMA-G
From where was the sample collected: Manufacturer
Laboratory sample identification: JMF21-009
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Teichert Perkins - Continuous Plant Dreyer Drum

Material Information

HMA Type: RHMA-G
HMA Grading: 3/4 inch
Lot number:
Sublot number:

Test Results

Test 1 of 7

DIME Test ID: 2021-03-05-21-1
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Asphalt Binder Content)
Verified Date: 04/19/2021
Date Tested: 03/29/2021
Submitted By Organization: CT D03 - North Region Materials Lab
Organization Address: 5330 Arboga Rd,
Organization City: Olivehurst
Organization State: CA
Organization Zipcode: 95961
Organization Email: jeff.herbert@dot.ca.gov
Organization Phone: (530) 741-4238
General Comments for this Test: JMF21-009.
Test Result Compliance: complies
Additional Comments When Verified:
Asphalt Binder Content 7.33 %
Correction Factor (Percent by mass of HMA Specimen) no data

Test 2 of 7

DIME Test ID: 2021-03-05-21-2
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Verified Date: 04/19/2021
Date Tested: 03/30/2021
Submitted By Organization: CT D03 - North Region Materials Lab
Organization Address: 5330 Arboga Rd,
Organization City: Olivehurst
Organization State: CA
Organization Zipcode: 95961
Organization Email: jeff.herbert@dot.ca.gov
Organization Phone: (530) 741-4238
General Comments for this Test: JMF21-009.
Test Result Compliance: not applicable
Additional Comments When Verified:
Bulk Specific Gravity 2.394
Bulk Specific Gravity 2 2.383
Bulk Specific Gravity 3 2.387
Average Bulk Specific Gravity 2.388

Test 3 of 7

DIME Test ID: 2021-03-05-21-3
Test Method: AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 04/19/2021
Date Tested: 03/29/2021
Submitted By Organization: CT D03 - North Region Materials Lab
Organization Address: 5330 Arboga Rd,
Organization City: Olivehurst
Organization State: CA
Organization Zipcode: 95961
Organization Email: jeff.herbert@dot.ca.gov
Organization Phone: (530) 741-4238
General Comments for this Test: JMF21-009.
Test Result Compliance: not applicable
Additional Comments When Verified:
Number of tests 1
Mass Determination Air
Method Performed Mechanical Agitation - Method A
Mass of container filled with water 7345.5 grams
Mass of oven-dry sample in air for Sample 1 2106.2 grams
Mass of container filled with the sample and water for Sample 1 8600.6 grams
Temperature of Water 76 °F
Specific Gravity for Sample 1 2.475

Test 4 of 7

DIME Test ID: 2021-03-05-21-4
Test Method: AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)
Verified Date: 04/19/2021
Date Tested: 03/22/2021
Submitted By Organization: CT D03 - North Region Materials Lab
Organization Address: 5330 Arboga Rd,
Organization City: Olivehurst
Organization State: CA
Organization Zipcode: 95961
Organization Email: jeff.herbert@dot.ca.gov
Organization Phone: (530) 741-4238
General Comments for this Test: JMF21-009.
Test Result Compliance: complies
Additional Comments When Verified:
Percent Air Voids 3.3 %
Percent Air Voids 2 3.7
Percent Air Voids 3 3.5
Percent Air Voids Average 3.5

Test 5 of 7

DIME Test ID: 2021-03-05-21-5
Test Method: AASHTO T283-14: Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage (Moisture Content)
Verified Date: 04/19/2021
Date Tested: 04/01/2021
Submitted By Organization: CT D03 - North Region Materials Lab
Organization Address: 5330 Arboga Rd,
Organization City: Olivehurst
Organization State: CA
Organization Zipcode: 95961
Organization Email: jeff.herbert@dot.ca.gov
Organization Phone: (530) 741-4238
General Comments for this Test: JMF21-009.
Test Result Compliance: complies
Additional Comments When Verified:
Average Dry Tensile Strength 145 psi
Average Wet Tensile Strength 98 psi
Tensile Strength Ratio 0.68

Test 6 of 7

DIME Test ID: 2021-03-05-21-6
Test Method: AASHTO T324-14: Standard Method of Test for Hamburg Wheel-Track Testing of Compacted Asphalt Mixtures (Hamburg Wheel Track)
Verified Date: 04/19/2021
Date Tested: 04/02/2021
Submitted By Organization: CT D03 - North Region Materials Lab
Organization Address: 5330 Arboga Rd,
Organization City: Olivehurst
Organization State: CA
Organization Zipcode: 95961
Organization Email: jeff.herbert@dot.ca.gov
Organization Phone: (530) 741-4238
General Comments for this Test: JMF21-009.
Test Result Compliance: complies
Additional Comments When Verified:
Specified minimum number of passes at ½” rut depth, or number of passes at ½” rut depth if applicable (Wheel A) 20000
Specified minimum number of passes at ½” rut depth, or number of passes at ½” rut depth if applicable (Wheel B) 20000
Impression at specified number of passes, or specified maximum impression if applicable (Wheel A) 3.71 mm
Impression at specified number of passes, or specified maximum impression if applicable (Wheel B) 3.83 mm
Stripping Inflection Point (Wheel A) 25000
Stripping Inflection Point (Wheel B) 25000

Test 7 of 7

DIME Test ID: 2021-03-05-21-7
Test Method: AASHTO T312-14: Preparing and Determining the Density of Asphalt Mixture Specimens by Means of the Superpave Gyratory Compactor (Method of Compaction)
Verified Date: 04/19/2021
Date Tested: 03/30/2021
Submitted By Organization: CT D03 - North Region Materials Lab
Organization Address: 5330 Arboga Rd,
Organization City: Olivehurst
Organization State: CA
Organization Zipcode: 95961
Organization Email: jeff.herbert@dot.ca.gov
Organization Phone: (530) 741-4238
General Comments for this Test: JMF21-009.
Test Result Compliance: not applicable
Additional Comments When Verified:
Volume of the specimen 1732.940 cm^3
Uncorrected relative density (Gmmu50-150) no data
Relative density (Gmm50-150) 2.4 %
Air Voids (AV50-150) 3.5 %

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
No tests have been assigned to this sample.