Print Report | Back to Sample Detail

Sample Record for 2020-11-12-40

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 213835 DEA: 051F7404 EFIS: 0514000049 QA Service Level: 1
DIST-CO-RTE-PM: 05-MON-101-R28.0/R30.6
Work Description: PLACE CONTINUOUSLY REINFORCED CONCRETE PAVEMENT ON EXISTING ROADWAY.
Location Description: MONTEREY COUNTY NEAR SAN LUCAS FROM 0.1 MILE SOUTH OF PARIS VALLEY ROAD OVERCROSSING TO RANCHO UNDERCROSSING
Contractor Name: PAPICH CONSTRUCTION COMPANY, INC.
Contractor Address: 398 SUNRISE TERRACE, ARROYO GRANDE, CA 93425
Resident Engineer: Amy Norris Structure Rep.: Juan Moreno

Sample Information

DIME Sample ID: 2020-11-12-40
TL Number from the TL Form: C979428
Sample Submitted By Organization: CT HQ - Sacramento Aggregate Testing Laboratory
Sample Organization Contact: (916) 227-7204
Type of Sample: Dispute Resolution
Type of Material: Aggregate
Sample Taken Date: 11/12/2020
Date that the sample was received by the laboratory/organization performing the testing: 03/29/2021
The quantity of what the sample constitutes: 2 bags
A brief description of the sample: 3/4 HMA L1, SL1
From where was the sample collected: Job Site
Laboratory sample identification: 21-HMA-0046
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: SPM Avenal

Material Information

Source Identification (SMARA, name of Pit or Job Site): na
The fabricator's/manufacturer's product name for the sample:
The fabricator/manufacturer designation for the sample:
The plant number:
A detailed description of where the material sample was collected: Production Paving
Where the material sample would have been placed if not sampled:
Primary Aggregate Nominal Size: 3/4 inch
The concrete mix design number:
Lot number: 1
Sublot number: 1
Aggregate Mix Number:
Test results on following page(s): 2

Test Results

Test 1 of 2

DIME Test ID: 2020-11-12-40-1
Test Method: AASHTO T11-5: Standard Method of Test for Materials Finer Than 75-μm (No. 200) Sieve in Mineral Aggregates by Washing
Verified Date: 04/01/2021
Date Tested: 03/30/2021
Submitted By Organization: CT HQ - Sacramento Aggregate Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: bang.d.nguyen@dot.ca.gov
Organization Phone: (916) 227-7204
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Which test procedure is being used Method A
Percent of sample passing the #200 sieve (by mass) 10 %

Test 2 of 2

DIME Test ID: 2020-11-12-40-2
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Verified Date: 04/01/2021
Date Tested: 04/01/2021
Submitted By Organization: CT HQ - Sacramento Aggregate Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: bang.d.nguyen@dot.ca.gov
Organization Phone: (916) 227-7204
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
What type of gradation is being tested? HMA Gradation
Cumulative percent passing the 1 1/2 in. sieve 100 %
Cumulative percent passing the 1 in. sieve 100 %
Cumulative percent passing the 3/4 in. sieve 98.5 %
Cumulative percent passing the 1/2 in. sieve 85.7 %
Cumulative percent passing the 3/8 in. sieve 74 %
Cumulative percent passing the #4 sieve 54.4 %
Cumulative percent passing the #8 sieve 38.9 %
Cumulative percent passing the #16 sieve 24.8 %
Cumulative percent passing the #30 sieve 16.6 %
Cumulative percent passing the #50 sieve 11.6 %
Cumulative percent passing the #100 sieve 8.4 %
Cumulative percent passing the #200 sieve 5.64 %