Print Report | Back to Sample Detail

Sample Record for 2021-03-25-9

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 215254 DEA: 031G5104 EFIS: 0318000313 QA Service Level: 1
DIST-CO-RTE-PM: 03-BUT,COL,GLE,SUT,YOL-5,32,70,80,162-VAR
Work Description: REMOVE & PLACE POLYESTER CONC OVERLAY, PLACE JOINT SEAL & HMA.
Location Description: BUTTE, COLUSA, GLENN, SUTTER, AND YOLO COUNTIES AT VARIOUS LOCATIONS
Contractor Name: TRUESDELL CORP OF CALIFORNIA INC
Contractor Address: 1310 W 23RD STREET, TEMPE AZ 85282
Resident Engineer: Selvendran Manoharan Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2021-03-25-9
TL Number from the TL Form: Sacramento Caltrans lab
Sample Submitted By Organization: Kwik Bond Polymers
Sample Organization Contact: 760-518-6064
Type of Sample: Quality Control
Type of Material: Polyester
Sample Taken Date: 03/25/2021
Date that the sample was received by the laboratory/organization performing the testing: 03/25/2021
The quantity of what the sample constitutes: 8 tankers
A brief description of the sample: 1 gallon can
From where was the sample collected: Source
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Kwik Bond Polymers and Polynt

Material Information

Mfg. Lot Number(s): 1322429
Batch number: 1322429
Mix number: 1322429

Test Results

Test 1 of 6

DIME Test ID: 2021-03-25-9-1
Test Method: ASTM D2196-Feb15: Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational Viscometer
Verified Date: 05/04/2021
Date Tested: 05/04/2021
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: larry.mccrum@dot.ca.gov
Organization Phone: (916) 227-7283
General Comments for this Test: Accepted Vendor Results
Test Result Compliance: complies
Additional Comments When Verified:
Viscosity 122

Test 2 of 6

DIME Test ID: 2021-03-25-9-2
Test Method: ASTM D1475-Nov13: Standard Test Method For Density of Liquid Coatings, Inks, and Related Products
Verified Date: 05/04/2021
Date Tested: 05/04/2021
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: larry.mccrum@dot.ca.gov
Organization Phone: (916) 227-7283
General Comments for this Test: Accepted Vendor Results
Test Result Compliance: complies
Additional Comments When Verified:
Density Units pounds/gallons
Liquid Density (pounds per gallon) 8.99

Test 3 of 6

DIME Test ID: 2021-03-25-9-3
Test Method: ASTM D638-Dec14: Standard Test Method for Tensile Properties of Plastics
Verified Date: 05/19/2021
Date Tested: 04/06/2021
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: larry.mccrum@dot.ca.gov
Organization Phone: (916) 227-7283
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Number of specimens tested 5
Conditioning procedure 18/25/50+5/70
Speed of testing 0.45 in/min
Sample 1 Width 0.491 in
Sample 1 Ultimate strength 3031.4 psi
Sample 1 Thickness 0.227 in
Sample 1 Area 0.1115 in^2
Sample 1 Ultimate Strength Actual 338 lbs
Sample 1 percent elongation 50.6 %
Sample 1 Time 3 MM:SS
Sample 2 Width 0.49 in
Sample 2 Thickness 0.228 in
Sample 2 Area 0.1117 in^2
Sample 2 Ultimate strength 3172.8 psi
Sample 2 Ultimate Strength Actual 354.4 lbs
Sample 2 percent elongation 41.8 %
Sample 2 Time 3 MM:SS
Sample 3 Width 0.491 in
Sample 3 Thickness 0.232 in
Sample 3 Area 0.1139 in^2
Sample 3 Ultimate strength 3108.9 psi
Sample 3 Ultimate Strength Actual 354.1 lbs
Sample 3 percent elongation 54.3 %
Sample 3 Time 3 MM:SS
Sample 4 Width 0.49 in
Sample 4 Thickness 0.235 in
Sample 4 Area 0.1152 in^2
Sample 4 Ultimate strength 3161.5 psi
Sample 4 Ultimate Strength Actual 364.2 lbs
Sample 4 percent elongation 54.7 %
Sample 4 Time 3 MM:SS
Sample 5 Width 0.491 in
Sample 5 Thickness 0.234 in
Sample 5 Area 0.1149 in^2
Sample 5 Ultimate strength 3281.1 psi
Sample 5 Ultimate Strength Actual 377 lbs
Sample 5 percent elongation 68.4 %
Sample 5 Time 3 MM:SS
Ultimate Strength Average 3151 psi
Percent Elongation Average 54 %

Test 4 of 6

DIME Test ID: 2021-03-25-9-4
Test Method: CTM 551-August 2012: Method of Test for Determining Suitability of Materials for Overlayment and Repair of Portland Cement Concrete Pavements and Structures
Verified Date: 05/04/2021
Date Tested: 05/04/2021
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: larry.mccrum@dot.ca.gov
Organization Phone: (916) 227-7283
General Comments for this Test: Accepted Vendor Results
Test Result Compliance: complies
Additional Comments When Verified:
Curing history for Sample 1 24hr
Maximum applied load (P) for Sample 1 1595.7 lb
Span length for Sample 1 9 in
Break location for Sample 1 PCC
Specimen defects/notes for Sample 1 no data
Surface type for Sample 1 SSD
Modulus of rupture (R) for Sample 1 797.85 psi
Curing history for Sample 2 24hr
Maximum applied load (P) for Sample 2 1829.9 lb
Span length for Sample 2 9 in
Break location for Sample 2 PCC
Specimen defects/notes for Sample 2 no data
Surface type for Sample 2 SSD
Modulus of rupture (R) for Sample 2 914.95 psi
Curing history for Sample 3 24hr
Maximum applied load (P) for Sample 3 1644 lb
Span length for Sample 3 9 in
Break location for Sample 3 PCC
Specimen defects/notes for Sample 3 no data
Surface type for Sample 3 SSD
Modulus of rupture (R) for Sample 3 822 psi

Test 5 of 6

DIME Test ID: 2021-03-25-9-5
Test Method: SCAQMD 309-91-Feb93: Determination of Static Volatile Emissions
Verified Date: 05/04/2021
Date Tested: 05/04/2021
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: larry.mccrum@dot.ca.gov
Organization Phone: (916) 227-7283
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Diameter of lid 154.98 mm
Room Temperature 72.3 f
Tare weight 0 grams
Initial weight 100.1 grams
Weight at 5 minutes 100 grams
Weight at 10 minutes 99.9 grams
Weight at 15 minutes 99.8 grams
Weight at 20 minutes 99.7 grams
Weight at 25 minutes 99.6 grams
Weight at 30 minutes 99.5 grams
Final weight 99.5 grams
Total weight loss 0.6 grams
Calculated radius of gallon can lid in cm 7.749 cm
Lid Factor 53.01 m^2
Volatile emission 31.806 grams/m^2

Test 6 of 6

DIME Test ID: 2021-03-25-9-6
Test Method: ASTM D2369-Jul10: Standard Test Method for Volatile Content of Coatings
Verified Date: 05/04/2021
Date Tested: 05/04/2021
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: larry.mccrum@dot.ca.gov
Organization Phone: (916) 227-7283
General Comments for this Test: Accepted Vendor Results
Test Result Compliance: complies
Additional Comments When Verified:
Mean of two volatile content determination 45.5

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
No tests have been assigned to this sample.