Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 55555 DEA: AMRL EFIS: AMRL
QA Service Level:
DIST-CO-RTE-PM: 59---
Work Description: Special project for submitting Sample information for AASHTO Materials Reference Laboratory (AMRL).
Location Description:
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown
DIME Sample ID: 2021-03-18-1
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Sample Organization Contact: (916) 227-7302
Type of Sample: Proficiency
Type of Material: Asphalt Binder
Sample Taken Date: 03/18/2021
Date that the sample was received by the laboratory/organization performing the testing: 03/18/2021
The quantity of what the sample constitutes: 1 of 1 can
A brief description of the sample: 263(A) PSP VISCOSITY GRADED
From where was the sample collected: Fabricator
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: AASHTO resource PSP
Performance Grade: PG 70-22
Modified: No
Lot number:
Sublot number:
Tank number:
Time of sample:
HMA Supplier:
Certified Asphalt Supplier: PNAC LLC - Fernley NV
Multigrade:
Multigrade Type:
Asphalt Binder Mix Number:
DIME Test ID: 2021-03-18-1-1
Test Method: AASHTO T240-17: Standard Method of Test for Effect of Heat and Air on a Moving Film of Asphalt Binder (Rolling Thin-Film Oven Test)
Verified Date: 04/12/2021
Date Tested: 04/07/2021
Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Organization Address: 5900 Folsom Boulevard, Room 225,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (916) 227-7302
General Comments for this Test: as per 2018 standard specs
Test Result Compliance: complies
Additional Comments When Verified:
Is mass change based on one or two containers?
|
Two
|
Any material loss from containers during heating process/testing?
|
No
|
Mass of empty container #1
|
164.568 grams
|
Mass of empty container #2
|
174.700 grams
|
Mass of container #1 before test (m1i)
|
200.414 grams
|
Mass of container #2 before test (m2i)
|
211.325 grams
|
Mass of container #1 after test (m1f)
|
200.339 grams
|
Mass of container #2 after test (m2f)
|
211.268 grams
|
Average mass change
|
-0.182 percent
|
DIME Test ID: 2021-03-18-1-2
Test Method: ASTM D5-13: Standard Test Method for Penetration of Bituminous Materials
Verified Date: 04/30/2021
Date Tested: 04/13/2021
Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Organization Address: 5900 Folsom Boulevard, Room 225,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (916) 227-7302
General Comments for this Test: ORIG @ 25C
Test Result Compliance: not applicable
Additional Comments When Verified:
Penetration Average
|
48.4 mm
|
DIME Test ID: 2021-03-18-1-3
Test Method: AASHTO T228-09r13: Standard Method of Test for Specific Gravity of Semi-Solid Asphalt Materials (Specific Gravity)
Verified Date: 04/30/2021
Date Tested: 04/13/2021
Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Organization Address: 5900 Folsom Boulevard, Room 225,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (916) 227-7302
General Comments for this Test:
Test Result Compliance: not applicable
Additional Comments When Verified:
DIME Test ID: 2021-03-18-1-4
Test Method: ASTM D5-13: Standard Test Method for Penetration of Bituminous Materials
Verified Date: 04/30/2021
Date Tested: 04/13/2021
Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Organization Address: 5900 Folsom Boulevard, Room 225,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (916) 227-7302
General Comments for this Test: ORIG @ 4C
Test Result Compliance: not applicable
Additional Comments When Verified:
Penetration Average
|
22.3 mm
|
DIME Test ID: 2021-03-18-1-6
Test Method: ASTM D5-13: Standard Test Method for Penetration of Bituminous Materials
Verified Date: 04/30/2021
Date Tested: 04/13/2021
Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Organization Address: 5900 Folsom Boulevard, Room 225,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (916) 227-7302
General Comments for this Test: RTFO @ 25C
Test Result Compliance: not applicable
Additional Comments When Verified:
Penetration Average
|
30.9 mm
|
DIME Test ID: 2021-03-18-1-7
Test Method: ASTM D5-13: Standard Test Method for Penetration of Bituminous Materials
Verified Date: 04/30/2021
Date Tested: 04/13/2021
Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Organization Address: 5900 Folsom Boulevard, Room 225,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (916) 227-7302
General Comments for this Test: RTFO @ 4C
Test Result Compliance: not applicable
Additional Comments When Verified:
Penetration Average
|
13.0 mm
|
DIME Test ID: 2021-03-18-1-8
Test Method: AASHTO T240-17: Standard Method of Test for Effect of Heat and Air on a Moving Film of Asphalt Binder (Rolling Thin-Film Oven Test)
Verified Date: 04/30/2021
Date Tested: 04/07/2021
Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Organization Address: 5900 Folsom Boulevard, Room 225,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (916) 227-7302
General Comments for this Test:
Test Result Compliance: not applicable
Additional Comments When Verified:
Is mass change based on one or two containers?
|
Two
|
Any material loss from containers during heating process/testing?
|
Yes
|
Mass of empty container #1
|
172.809 grams
|
Mass of empty container #2
|
166.875 grams
|
Mass of container #1 before test (m1i)
|
208.240 grams
|
Mass of container #2 before test (m2i)
|
202.117 grams
|
Mass of container #1 after test (m1f)
|
208.238 grams
|
Mass of container #2 after test (m2f)
|
202.108 grams
|
Average mass change
|
-0.016 percent
|
DIME Test ID: 2021-03-18-1-9
Test Method: AASHTO T240-17: Standard Method of Test for Effect of Heat and Air on a Moving Film of Asphalt Binder (Rolling Thin-Film Oven Test)
Verified Date: 04/30/2021
Date Tested: 04/09/2021
Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Organization Address: 5900 Folsom Boulevard, Room 225,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (916) 227-7302
General Comments for this Test:
Test Result Compliance: not applicable
Additional Comments When Verified:
Is mass change based on one or two containers?
|
Two
|
Any material loss from containers during heating process/testing?
|
Yes
|
Mass of empty container #1
|
173.070 grams
|
Mass of empty container #2
|
173.578 grams
|
Mass of container #1 before test (m1i)
|
208.370 grams
|
Mass of container #2 before test (m2i)
|
208.918 grams
|
Mass of container #1 after test (m1f)
|
208.341 grams
|
Mass of container #2 after test (m2f)
|
208.886 grams
|
Average mass change
|
-0.086 percent
|
DIME Test ID: 2021-03-18-1-10
Test Method: AASHTO T228-09r13: Standard Method of Test for Specific Gravity of Semi-Solid Asphalt Materials (Specific Gravity)
Verified Date: 04/30/2021
Date Tested: 04/06/2021
Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Organization Address: 5900 Folsom Boulevard, Room 225,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (916) 227-7302
General Comments for this Test:
Test Result Compliance: not applicable
Additional Comments When Verified:
DIME Test ID: 2021-03-18-1-11
Test Method: ASTM D5-13: Standard Test Method for Penetration of Bituminous Materials
Verified Date: 04/30/2021
Date Tested: 04/13/2021
Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Organization Address: 5900 Folsom Boulevard, Room 225,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (916) 227-7302
General Comments for this Test:
Test Result Compliance: not applicable
Additional Comments When Verified:
Penetration Average
|
23.7 mm
|