Print Report | Back to Sample Detail

Sample Record for 2021-01-28-23

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 66667 DEA: JMFPP EFIS: 0019000043 QA Service Level:
DIST-CO-RTE-PM: 59---
Work Description: Special project for submitting Sample information for JMF Prequalification Program.
Location Description:
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2021-01-28-23
TL Number from the TL Form:
Sample Submitted By Organization: Syar Industries, Incorporated
Sample Organization Contact: (707) 259-5705
Type of Sample: Preliminary
Type of Material: Hot Mix Asphalt
Sample Taken Date: 01/28/2021
Date that the sample was received by the laboratory/organization performing the testing: 01/28/2021
The quantity of what the sample constitutes: 780 Pounds
A brief description of the sample: 1/2" HMA-SP RAP WMA
From where was the sample collected: Manufacturer
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Syar Todd Road Drum

Material Information

HMA Type: Type A HMA
HMA Grading: 1/2 inch
Lot number:
Sublot number:
HMA Mix Number:
Test results on following page(s): 5

Test Results

Test 1 of 5

DIME Test ID: 2021-01-28-23-1
Test Method: AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 03/16/2021
Date Tested: 01/28/2021
Submitted By Organization: Syar Industries, Incorporated
Organization Address: P.O. Box 2540,
Organization City: Napa
Organization State: CA
Organization Zipcode: 94558
Organization Email: nhall@syar.com
Organization Phone: (707) 333-8911
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Number of tests 1
What is the unit of measurement for theoretical density? US Units
Mass Determination Air
Specific Gravity for Sample 1 2.475
Theoretical maximum density at 25°C (77°F) no data

Test 2 of 5

DIME Test ID: 2021-01-28-23-2
Test Method: AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)
Verified Date: 03/16/2021
Date Tested: 01/28/2021
Submitted By Organization: Syar Industries, Incorporated
Organization Address: P.O. Box 2540,
Organization City: Napa
Organization State: CA
Organization Zipcode: 94558
Organization Email: nhall@syar.com
Organization Phone: (707) 333-8911
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Percent Air Voids 4.2 %
Percent Air Voids 2 4.2 %
Percent Air Voids 3 4.5 %
Average Percent Air Voids 4.3 %

Test 3 of 5

DIME Test ID: 2021-01-28-23-3
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Verified Date: 03/16/2021
Date Tested: 01/28/2021
Submitted By Organization: Syar Industries, Incorporated
Organization Address: P.O. Box 2540,
Organization City: Napa
Organization State: CA
Organization Zipcode: 94558
Organization Email: nhall@syar.com
Organization Phone: (707) 333-8911
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Bulk Specific Gravity 2.37
Bulk Specific Gravity 2 2.37
Bulk Specific Gravity 3 2.364
Average Bulk Specific Gravity 2.368

Test 4 of 5

DIME Test ID: 2021-01-28-23-4
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 03/16/2021
Date Tested: 01/28/2021
Submitted By Organization: Syar Industries, Incorporated
Organization Address: P.O. Box 2540,
Organization City: Napa
Organization State: CA
Organization Zipcode: 94558
Organization Email: nhall@syar.com
Organization Phone: (707) 333-8911
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
What temperature unit is used? Fahrenheit
Test procedure used? Method A
Mass of HMA Sample prior to ignition no data
Corrected Asphalt Binder Content 4.8 %
Mass Loss no data
Correction Factor (Percent by mass of HMA Specimen) no data
Moisture Content no data
Temperature Compensation Factor no data
Test Temperature no data

Test 5 of 5

DIME Test ID: 2021-01-28-23-5
Test Method: AASHTO T324-14: Standard Method of Test for Hamburg Wheel-Track Testing of Compacted Asphalt Mixtures (Hamburg Wheel Track)
Verified Date: 03/16/2021
Date Tested: 01/28/2021
Submitted By Organization: Syar Industries, Incorporated
Organization Address: P.O. Box 2540,
Organization City: Napa
Organization State: CA
Organization Zipcode: 94558
Organization Email: nhall@syar.com
Organization Phone: (707) 333-8911
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Specified minimum number of passes at ½” rut depth, or number of passes at ½” rut depth if applicable (Wheel A) 25000
Specified minimum number of passes at ½” rut depth, or number of passes at ½” rut depth if applicable (Wheel B) 25000
Impression at specified number of passes, or specified maximum impression if applicable (Wheel A) no data0 mm
Impression at specified number of passes, or specified maximum impression if applicable (Wheel B) no data0 mm
Stripping Inflection Point (Wheel A) 0
Stripping Inflection Point (Wheel B) 0