Print Report | Back to Sample Detail

Sample Record for 2021-01-26-8

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 66667 DEA: JMFPP EFIS: 0019000043 QA Service Level:
DIST-CO-RTE-PM: 59---
Work Description: Special project for submitting Sample information for JMF Prequalification Program.
Location Description:
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2021-01-26-8
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - Hot Mix Asphalt Laboratory
Sample Organization Contact: (916) 227-7302
Type of Sample: Verification
Type of Material: Reclaimed Asphalt Pavement
Sample Taken Date: 01/26/2021
Date that the sample was received by the laboratory/organization performing the testing: 01/25/2021
The quantity of what the sample constitutes: 2 bags
A brief description of the sample: RAP
From where was the sample collected: Supplier
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Syar Industries

Material Information

RAP Source: Stockpile
Aggregate Size:
Aggregate Source:
RAP Stockpile:
Stockpile Size (tons):

Test Results

Test 1 of 3

DIME Test ID: 2021-01-26-8-1
Test Method: AASHTO T30-19: Standard Method of Test for Mechanical Analysis of Extracted Aggregate (Mechanical Analysis)
Verified Date: 02/04/2021
Date Tested: 01/26/2021
Submitted By Organization: CT HQ - Hot Mix Asphalt Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (916) 227-7302
General Comments for this Test:
Additional Comments When Verified:
Does this test use 1/4 sieve? No
Total mass of material in the sample 1652.2 grams
Mass retained on the 2 in. sieve 0 grams
Cumulative mass retained on the 1 1/2 in. sieve 0 grams
Cumulative mass retained on the 1 in. sieve 0 grams
Cumulative mass retained on the 3/4 in. sieve 0 grams
Cumulative mass retained on the 1/2 in. sieve 0 grams
Cumulative mass retained on the 3/8 in. sieve 14 grams
Cumulative mass retained on the #4 sieve 379.2 grams
Cumulative mass retained on the #8 sieve 746.5 grams
Cumulative mass retained on the #16 sieve 994.3 grams
Cumulative mass retained on the #30 sieve 1145.1 grams
Cumulative mass retained on the #50 sieve 1285.3 grams
Cumulative mass retained on the #100 sieve 1429.4 grams
Cumulative mass retained on the #200 sieve 1496.9 grams
Cumulative percent passing the 2 in. sieve 100 %
Cumulative percent passing the 1 1/2 in. sieve 100 %
Cumulative percent passing the 1 in. sieve 100 %
Cumulative percent passing the 3/4 in. sieve 100 %
Cumulative percent passing the 1/2 in. sieve 100 %
Cumulative percent passing the 3/8 in. sieve 99.2 %
Cumulative percent passing the #4 sieve 77 %
Cumulative percent passing the #8 sieve 54.8 %
Cumulative percent passing the #16 sieve 39.8 %
Cumulative percent passing the #30 sieve 30.7 %
Cumulative percent passing the #50 sieve 22.2 %
Cumulative percent passing the #100 sieve 13.5 %
Cumulative percent passing the #200 sieve 9.4 %

Test 2 of 3

DIME Test ID: 2021-01-26-8-2
Test Method: AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 02/02/2021
Date Tested: 01/26/2021
Submitted By Organization: CT HQ - Hot Mix Asphalt Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (916) 227-7302
General Comments for this Test:
Additional Comments When Verified:
Number of tests 2
Mass Determination Air
Method Performed Mechanical Agitation - Method A
Mass of container filled with water 7356.0 grams
Mass of oven-dry sample in air for Sample 1 1562.0 grams
Mass of container filled with the sample and water for Sample 1 8303.0 grams
Mass of container filled with water 7356.0
Mass of oven-dry sample in air for Sample 2 1548.0 grams
Mass of container filled with the sample and water for Sample 2 8299.0 grams
Temperature of Water 77 °F
Specific Gravity for Sample 1 2.538
Specific Gravity for Sample 2 2.558
Average Specific Gravity 2.548

Test 3 of 3

DIME Test ID: 2021-01-26-8-3
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Asphalt Binder Content)
Verified Date: 02/10/2021
Date Tested: 01/26/2021
Submitted By Organization: CT HQ - Hot Mix Asphalt Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (916) 227-7302
General Comments for this Test:
Additional Comments When Verified:
Asphalt Binder Content 7.23 %
Correction Factor (Percent by mass of HMA Specimen) 0 %

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
No tests have been assigned to this sample.