Print Report | Back to Sample Detail

Sample Record for 2021-01-07-9

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 214908 DEA: 112N0424 EFIS: 1118000193 QA Service Level: 1
DIST-CO-RTE-PM: 11-SD-76-R4.2/R6.4
Work Description: PLACE MICROSURFACING, COLD PLANE AND REPLACE AC WITH HOT MIX ASPHALT.
Location Description: SAN DIEGO COUNTY IN OCEANSIDE FROM RANCHO DEL ORO DRIVE TO 0.2 MILE EAST OF COLLEGE BOULEVARD
Contractor Name: HAZARD CONSTRUCTION CO
Contractor Address: 10529 Vine Streeet, Lakeside, CA 92040
Resident Engineer: Albert Labrador Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2021-01-07-9
TL Number from the TL Form: Sacramento Caltrans lab
Sample Submitted By Organization: Kwik Bond Polymers
Sample Organization Contact: 760-518-6064
Type of Sample: Quality Control
Type of Material: Polyester
Sample Taken Date: 01/07/2021
Date that the sample was received by the laboratory/organization performing the testing: 01/15/2021
The quantity of what the sample constitutes: 2 tankers
A brief description of the sample: 1 gallon can
From where was the sample collected: Source
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Kwik Bond Polymers and Polynt

Material Information

Mfg. Lot Number(s): 1304788
Batch number: 1304788
Mix number: 1304788

Test Results

Test 1 of 2

DIME Test ID: 2021-01-07-9-1
Test Method: ASTM D2196-Feb15: Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational Viscometer
Verified Date: 01/28/2021
Date Tested: 01/28/2021
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: larry.mccrum@dot.ca.gov
Organization Phone: (916) 227-7283
General Comments for this Test:
Additional Comments When Verified:
Viscosity 2352

Test 2 of 2

DIME Test ID: 2021-01-07-9-2
Test Method: ASTM D638-Dec14: Standard Test Method for Tensile Properties of Plastics
Verified Date: 01/28/2021
Date Tested: 01/28/2021
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: larry.mccrum@dot.ca.gov
Organization Phone: (916) 227-7283
General Comments for this Test: Specimen 3,4 and 5 broke at flaws.
Additional Comments When Verified:
Number of specimens tested 5
Conditioning procedure 40/25/50
Speed of testing 0.2 in/min
Sample 1 Width 0.485 in
Sample 1 Ultimate strength 3009.7 psi
Sample 1 Thickness 0.127 in
Sample 1 Area 0.0616 in^2
Sample 1 Ultimate Strength Actual 185.4 lbs
Sample 1 percent elongation 31.9 %
Sample 1 Time 6 MM:SS
Sample 2 Width 0.486 in
Sample 2 Thickness 0.13 in
Sample 2 Area 0.0632 in^2
Sample 2 Ultimate strength 3112.3 psi
Sample 2 Ultimate Strength Actual 196.7 lbs
Sample 2 percent elongation 40.5 %
Sample 2 Time 6 MM:SS
Sample 3 Width 0.483 in
Sample 3 Thickness 0.133 in
Sample 3 Area 0.0642 in^2
Sample 3 Ultimate strength 2961.1 psi
Sample 3 Ultimate Strength Actual 190.1 lbs
Sample 3 percent elongation 29.2 %
Sample 3 Time 5 MM:SS
Sample 4 Width 0.484 in
Sample 4 Thickness 0.128 in
Sample 4 Area 0.062 in^2
Sample 4 Ultimate strength 2962.9 psi
Sample 4 Ultimate Strength Actual 183.7 lbs
Sample 4 percent elongation 28.6 %
Sample 4 Time 4 MM:SS
Sample 5 Width 0.483 in
Sample 5 Thickness 0.127 in
Sample 5 Area 0.0613 in^2
Sample 5 Ultimate strength 2962.5 psi
Sample 5 Ultimate Strength Actual 181.6 lbs
Sample 5 percent elongation 29.3 %
Sample 5 Time 4 MM:SS
Ultimate Strength Average 3002 psi
Percent Elongation Average 32 %

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
No tests have been assigned to this sample.