Print Report | Back to Sample Detail

Sample Record for 2020-12-18-1

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 99999 DEA: 0322222 QA Service Level:
DIST-CO-RTE-PM: 03-SAC,OMG-888,99,80-0.6-0.6
Work Description: THIS PROJECT RECORD WAS ADDED FOR DIME TESTERS - DATA SUBMITTED FOR THIS PROJECT SHOULD NOT BE USED FOR ANY OTHER PURPOSES.
Location Description: THIS PROJECT RECORD WAS ADDED FOR DIME TESTERS - DATA SUBMITTED FOR THIS PROJECT SHOULD NOT BE USED FOR ANY OTHER PURPOSES.
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2020-12-18-1
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Sample Organization Contact: (916) 227-7253
Type of Sample: Quality Assurance
Type of Material: Aggregate
Sample Taken Date: 12/18/2020
Date that the sample was received by the laboratory/organization performing the testing: 12/18/2020
The quantity of what the sample constitutes: ?
A brief description of the sample: ?
From where was the sample collected: Manufacturer
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: jomara fabricator

Material Information

Source Identification (SMARA or name of Pit): SMARA
The fabricator's/manufacturer's product name for the sample:
The fabricator/manufacturer designation for the sample:
The plant number:
A detailed description of where the material sample was collected: Unknown
Where the material sample would have been placed if not sampled:
Primary Aggregate Nominal Size: 1-1/2 inch
The concrete mix design number:
Lot number:
Sublot number:

Test Results

Test 1 of 4

DIME Test ID: 2020-12-18-1-1
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
Data has not been verified.

Test 2 of 4

DIME Test ID: 2020-12-18-1-2
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
Data has not been verified.

Test 3 of 4

DIME Test ID: 2020-12-18-1-3
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
Data has not been verified.

Test 4 of 4

DIME Test ID: 2020-12-18-1-4
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Verified Date: 12/23/2020
Date Tested: 12/23/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
What type of gradation is being tested? HMA Gradation
Does this test use 1/4 sieve? (question for HMA Gradation Type) No
Total mass of material in the sample 100 grams
Cumulative mass retained on the 1 1/2 in. sieve 1 grams
Cumulative mass retained on the 1 in. sieve 1 grams
Cumulative mass retained on the 3/4 in. sieve 1 grams
Cumulative mass retained on the 1/2 in. sieve 12 grams
Cumulative mass retained on the 3/8 in. sieve 5 grams
Cumulative mass retained on the #4 sieve 36 grams
Total sample mass passing the #4 sieve 47 grams
Total mass of fine material in the sample 47 grams
Cumulative mass retained on the #8 sieve 25 grams
Cumulative mass retained on the #16 sieve 7 grams
Cumulative mass retained on the #30 sieve 3 grams
Cumulative mass retained on the #50 sieve 4 grams
Cumulative mass retained on the #100 sieve 3 grams
Cumulative mass retained on the #200 sieve 1.9 grams
Cumulative percent passing the 1 1/2 in. sieve 99 %
Cumulative percent passing the 1 in. sieve 99 %
Cumulative percent passing the 3/4 in. sieve 99 %
Cumulative percent passing the 1/2 in. sieve 88 %
Cumulative percent passing the 3/8 in. sieve 95 %
Cumulative percent passing the #4 sieve 64 %
Cumulative percent passing the #8 sieve 30 %
Cumulative percent passing the #16 sieve 54.5 %
Cumulative percent passing the #30 sieve 59.9 %
Cumulative percent passing the #50 sieve 58.6 %
Cumulative percent passing the #100 sieve 59.9 %
Cumulative percent passing the #200 sieve 61.41 %

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
No tests have been assigned to this sample.